- Trusted Seller
1980 Clausing 15"x50" Engine Lathe
- Manufacturer: Clausing/Colchester
- Model: 15"
Tool Post Tailstock 12" 3 Jaw Chuck Work Light Chuck size: 12" 3-Jaw | Maximum swing over bed: 15.7" | Maximum swing over cross slide: 9.7" | Distance between centers: 50" | Spindle nose / bore / bar capacity:...
Texas, USA 
SUMMIT 30-4 MANUAL LATHE
- Manufacturer: Summit
- Model: 30-4
- Spindle bore: 107.94999999999999 millimeter
SWING OVER CROSS 20" TAPER ATTACHMENT YES SUMMIT MANUAL LATHE
- Trusted SellerAuction
Summit 30-9x120 Lathe w/ Tailstock and Indexer
- Manufacturer: Summit
- Model: 30-9X120
Summit 30-9x120 Lathe w/ Tailstock and Indexer
Midland, TXVisit Auction Website 
POREBA Hollow Spindle Engine Lathe
- Manufacturer: Poreba
- Model: TRP90
- Spindle bore: 319.78599999999994 millimeter
Serial number SN: 7402-06-09018-05 Station On Carriage, Thread Dial, Steady Rest, Inch/Metric, Threading, Power Rapid Traverse, Hardened Bed ways and Gap Bed.
- Trusted Seller
MONARCH DYNA SHIFT 90 /25000
- Manufacturer: Monarch
- Model: Dyna Shift 90/25000
40" X176" (14'-6") Used Heavy Duty Monarch Engine Lathe Swing Over Bed Ways 40" Swing Over Cross Slide 24" Center Distance 176" (14'-6") Spindle Hole 4-1/16" Spindle Speeds 6 To 750 Rpm's Spindle Nose D-11 Face P...
Navasota, TX - Trusted Seller
1960 MONARCH 612
- Manufacturer: Monarch
- Model: 612
Navasota, TX - Trusted Seller
SUMMIT 16X60
- Manufacturer: Summit
- Model: 16X60
Houston, TX - Trusted Seller
40"X172" POREBA ENGINE LATHE MODELTYPE TR100B
- Manufacturer: Poreba
- Model: TR100B
USED 40"X172" POREBA 4 ENGINE LATHE MODEL TYPE TR100B Swing Over Bed Ways 40" Swing Over Cross Slide 29" Swing In Gap 53" Length In Front Of Nose 25" Center Distance 172" Spindle Hole 4.250" Spindle Speeds 6.3 To...
Navasota, TX - Trusted Seller
40" X` 176" Monarch Heavy Duty Engine Lathe Model 90 Dyna Shift
- Manufacturer: Monarch
- Model: Dyna Shift 90/25000
40" X176" (14'-6") Used Heavy Duty Monarch Engine Lathe Swing Over Bed Ways 40" Swing Over Cross Slide 24" Center Distance 176" (14'-6") Spindle Hole 4-1/16" Spindle Speeds 6 To 750 Rpm's Spindle Nose D-11 Face P...
Navasota, TX - Trusted Seller
Summit Engine Lathe 20"X80" With 4" Spindle Hole Model 20X80B
- Manufacturer: Summit
- Model: 20X80
Navasota, TX - Trusted Seller
Summit Engine Lathe 20"X80" With 4" Spindle Hole Model 20X80B
- Manufacturer: Summit
- Model: 20X80
Navasota, TX - Trusted Seller
SUMMIT 20X80-4
- Manufacturer: Summit
- Model: 20X80
Navasota, TX 
BAILEIGH METAL LATHE PL-1236E
- Manufacturer: Baileigh
- Model: PL-1236E
70 to 1,400 rpm variable speed. Integrated gear system allows for taping, turning, and polishing. All ways are ground and hardened to ensure long life. Runs on 220-volt single-phase power. Capable of standard and...
Ennis, TX
BAILEIGH METAL LATHE PL-1340E
- Manufacturer: Baileigh
- Model: PL-1340E
8 spindle speeds, from 70 to 2,000 rpm. Runs on 220-volt single-phase power. Digital readout (DRO) comes hooked up and helps with repeatability. Quick-change tool post saves you the trouble of screwing and unscre...
Ennis, TX
BAILEIGH METAL LATHE PL-1236E-DRO
- Manufacturer: Baileigh
- Model: PL-1236E-DRO
Recommended for small fabricators, schools, or garages. 70 to 1,400 rpm variable speed. Integrated digital readout (DRO) helps you get repeatable results. Quick-change tool post makes tooling changes more efficie...
Ennis, TX
Baileigh PL-1236E Centre Lathe
- Manufacturer: Baileigh
- Model: PL-1236E
Good condition Baileigh PL-1236E Centre Lathes. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword