Used Calendering in Piedmont, Italy

DIMECO calender 600 x 3 mm.

• Manufacturer: Dimeco

Sheet passage width: 600 mm. | Max thickness tape: 0.5-3mm | Diameter of the rollers: 60 mm. | Number of rolls: number 11 | Number of traction rollers: no. 2+2

ESIMEC calender 1.000 x 3mm.

• Manufacturer: ESIMEC

Max width tape: 1,000 mm. | Max thickness tape: 0.5-2.5mm. | Diameter of the rollers: 80 mm. | Number of rolls: n° 9 | Introduction ramps: Present

JOINT calender 1.250 x 3 mm.

• Manufacturer: Joint

Sheet passage width: 1,250 mm. | Max thickness tape: 0.5 - 3mm | Diameter of the rollers: 90 mm | Number of rolls: no. 9 | Number of traction rollers: no. 2 | Introduction ramps: Plumbing present

Servopresse calender 300 x 3 mm.

• Manufacturer: Servopresse

Sheet passage width: 300 mm. | Sheet metal thickness: 0-3mm.

1980 INCAR-DUCCI A1-320-M

• Manufacturer: INCAR-DUCCI

Typology: CALANDER WITH INVITATION | Weight: 3500 kg | Maximum calendering length: 2050 mm | Maximum sheet thickness 40 kg / mm²: 6 mm | N.1 upper idle roller: Ø 160 mm | N. 2 independent lower rollers: Ø 150 x ...

STANKOIMPORT NB 2220 Y4 2000×6 mm

• Manufacturer: Stankoimport

Typology: CALANDER WITH INVITATION | Natricola: NB 2220 Y4 | Maximum calendering length: 2000 mm | Maximum sheet thickness 40 kg / mm²: 6 mm | Upper roller lift with push coupling: 200 mm | N.1 upper idle roller...

NORDA grille 650 x 3mm.

• Manufacturer: NORDA

Max width tape: 650 mm. | Max thickness tape: 0.5 - 3mm | Number of rolls: no. 9 | Diameter of the rollers: 60 mm.

CALANDER - STANKOIMPORT

• Manufacturer: Stankoimport

APOLLO TF 236 CE

• Manufacturer: Apollo

Typology: SCANTONATRICE | Maximum cutting length: 230 mm | Maximum cutting thickness: 6 mm | Fixed angle: 90° | Dimension: 1600 x 1000 x 1000 mm