Used Brewing Equipment in Bavaria, Germany

Brewing plant

Brewing plant with stainless steel 5-device brewhouse (manufacturer: Nordhausen) with an output of 10 hl, with 2-roll grist mill, wort cooling, wort aeration and hot water tank. Fermentation, storage and pressur...

Brew vessels with wort cooling

• Manufacturer: GBT GmbH

Additional title: y. o. c.: mostly 2003 | Finished wort: 150 hl | Grist: 2500 kg | Current: three-phase A.C. current | Voltage: 400 V | Frequency: 50 Hz | Features: lauter tun, low pressure cooking wort copper-...

100 hl beer brewery with steam-heated brewhouse with stainless steel vessels 25-0213 25-0213

Catalog No.: 25-0213 Condition: Used Quantity: 1 MJ UNI-HAL 100 hl Brewery consisting of: Item No.: 210218MW Grain Mill / Grain Milling System with 4-Roll Mill Item No.: 210219MW 5-Vessel Brewhouse / Steam-Heated...

Brewhouse hood pavilion

• Manufacturer: vbw-weihenstephan

Free-standing pavilion constructed by upcycling the copper hood from a brewing vessel. Diameter is determined by the existing copper hood, so various different sizes are possible. A variety of options regarding f...

2-vessel-brewhouse

• Manufacturer: Škrlj

2-unit brewing system mounted on a stainless steel frame as a brewing block. This consists of the following components: - Stainless steel mash/lauter tun for mashing, mashing and draining the mash. Separate cont...

2-vessel-brewhouse

• Manufacturer: Škrlj

2-unit brewing system mounted on a stainless steel frame as a brewing block. This consists of the following components: - Stainless steel mash/lauter tun for mashing, mashing and draining the mash. Separate cont...

Pub brewery

• Manufacturer: Diverse / keine Angabe

The pub brewery plant consists of a copper-lined 2-unit brewhouse (cast volume 13.2 hl) and fermentation and storage cellar with 7 double-walled tanks. In addition, the pub brewing equipment has all the other fac...

Two vessel brewhouse

• Manufacturer: Diverse / keine Angabe

2 vessel brewhouse, copper cladded (knock-out wort 13 hl). Both brewing vessels are constructed from stainless steel with copper cladding. The wort kettle is equipped with electrical heating mats. Alternatively t...

Pub brewery

• Manufacturer: Kaspar Schulz

Complete production and filling plant for a pub brewery, consisting of the following components: 1. Milling plant Milling mill with malt feed hopper and pipe chain conveyor system for malt grist. 2. Brewhouse ...

4 vessel brewhouse

• Manufacturer: Ziemann

Copper 4-vessel brewhouse for a production of approx. 100 hl / brew consisting of mash kettle, mash tun, lauter tun and wort kettle as well as a whirlpool. The brewhouse was rebuilt and modernized several times i...

2 vessel brewhouse

• Manufacturer: Huppmann

Additional title: Brewing vessels with copper hoods and hop dispenser, whirlpool and wort cooling | Capacity: 150 hl/brew | Operation / control: ProLeit / Siemens S7 | Material: brew house vessels copper-covere...

mash tun

• Manufacturer: vbw-weihenstephan

Additional title: copper brew vessel | Capacity: 97 hl | Width: 3000 mm | Material: copper | Features: spray head

wort kettle

• Manufacturer: Ziemann

Wort kettle between 1990-2000 several times modernized and rebuilt. Copper hood lined with stainless steel inside.

Hop dosing tanks

• Manufacturer: Jacob Carl

2 hop dispensing vessels from a 100 hl brewhouse Additional title: additive dissolving and dosing tanks | Brew size: 100 hl | Material: stainless steel. polished surface | Position: free standing | Base construct...

Lauter tun

• Manufacturer: vbw-weihenstephan

Additional title: stainless steel brew vessel | Total volume: 300 hl | Area approx.: 15 m² | Specific false bottom load: 165 kg/m² | Frame height: 2 m | Material: Stainless steel | Features: Outlet vent bracket,...