Building Filters
8 Station Dual Head Cleat Former for Duct Lines
In brief Ductformer’s Model CR8-CF-DH Dual Head Cleat Former forms the Drive Cleat Flange on both ends of the Duct in a single pass through operation. The System overall can be incorporated into any existing Duct...
Sutton, MA
TK 16 Ga. Pitts. (Choice of Opposing Rolls)
- Manufacturer: Pitts
The 16 gauge Pittsburgh Lock machine has 7 forming stations with 2 forming positions. One position forms the Pittsburgh Lock, while the outboard position has the ability of forming a number of other profiles, to ...
Sutton, MA
Flagler 12 Station Lockformer TDC Machine
- Manufacturer: Flagler
Extended Shafts for Auxiliary Tooling Features: 12 Forming stations with Adjustable Feed table for dual TDC Forming when forming TDC Flange on opposing side of duct work 1-1/2″ Dia.(At Bearing) Hardened and Groun...
Sutton, MA
12 & 14 Station TDFC Dual Head Rollformer for Duct Lines
- Manufacturer: Ductformer
- Model: TDFC
The TDFC Flange application has proven to be the most cost effective method to construct and install commercial rectangular ductwork. The C-Style Flange provides the extra strength and rigidity to sustain the Air...
Sutton, MA
CR8 Auto Feed Rollform System
The Automated CR8-SDC Auto Feed Rollform System is designed to feed and form the Flat ’S’ and Drive Cleats on the inboard Rolls directly from coil stock. The Automated System consists of a Dual Station Coil Cradl...
Sutton, MA
CR8-CF Cleat Former
You will notice the quality of the CR8-CF Cleat Edge Former as soon as you turn the power on. The quietness while running reveals the precision workmanship and superior design to provide years of dependable servi...
Sutton, MARAMS-2007 20ga Stand Alone Power Flanger
- Manufacturer: Rams
This unit comes mounted in a heavy duty cabinet. The RAMS-2007 Power Flanger will form a 7/32″ right angle flange on either straight or curved pieces. It has an adjustable “auto guide” which can be set to automat...
Sutton, MA
TK No. 24 Collar Maker
Capacity: 24-30 Gauge Speed: 30ft./minute Notch,bead,crimp and roll complete round starting collars, 3″ to 14″ in diameter out of 24 to 30 gauge galvanized – in seconds, not minutes and with only one pass! Just c...
TK Hem & Kick Roll Former
- Manufacturer: Tin Knocker
This machine is standard equipped with no tooling in the center position and (2) sets of outboard shafts equipped with; ½” x 180-degree hem rolls for 20-26ga (right side) ½ Hem with 5/8” Kick Rolls (left side) See .
TK 20 Ga. Pitts. (With Choice of Drive Cleat or Acme Rolls)
- Manufacturer: Acme
. This 5 station 20 Gauge Pittsburgh lock roll former is offered with choice of Drive Cleat or Acme Rolls on the other outboard side. Powered by a 1 HP motor with V-belt drive, this machine is built for dependab...
Sutton, MA
TK 20 Ga. Button Lock (230/3 Phase) (3 HP)
(Also known as “Button Punch Snap Lock” Tin Knocker’s 9 Station Button Lock Roll Former means no hammering over of edges and fast duct assembly. 220/3/60 Electrics, standard. Comes with “male” tooling on one sid...
- Sutton, MA
RAMS-2013 S & Drive Machine
- Manufacturer: Rams
The unit comes with a 3 HP electric motor, 208-230V single phase .We use Torrington Needle Bearings and hardened steel components throughout (62 Rockwell). The cabinet is heavy gauge steel with a Hammertone Green...
Sutton, MA
RAMS-2007-AA Auto Guide 20ga Stand Alone Power Flanger
- Manufacturer: Rams
model: Capacity | rams-2007-aa: 20-24 Gauge Mild Steel
Sutton, MA
RAMS 2060-DB 60″ 20 Gauge Duct Beader
- Manufacturer: Rams
Sutton, MA
