Used Bending & Forming in Minnesota, USA

PEDRAZZOLI BEND MASTER 65

• Manufacturer: Pedrazzoli
• Model: Bend Master 65

PEDRAZZOLI (DEMO) MODEL BEND MASTER 65 HIGH-SPEED ELECTRIC MANDREL BENDER 2.5" X .083 CAPACITY CW AND CCW BENDING 9.8" MAXIMUM CLR CW 9.4" MAXIMUM CLR CW-CCW 1.87' MINIMUM INSIDE RADIUS W/STANDARD SPINDLE VARIABL...

PEDRAZZOLI BEND MASTER 45

• Manufacturer: Pedrazzoli
• Model: Bend Master 45

PEDRAZZOLI (DEMO) BEND MASTER 45 HIGH-SPEED ELECTRIC MANDREL BENDER 1.75" X .118 CAPACITY CW AND CCW BENDING 6" MAXIMUM CLR CW 6" MAXIMUM CLR CW-CCW 1.57" MINIMUM INSIDE RADIUS W/STANDARD SPINDLE VARIABLE RADIUS ...

BEND-TECH DRAGON A400

• Manufacturer: Dragon
• Model: A400

BEND-TECH (NEW) MODEL DRAGON A400 CAD/CAM/CNC TUBE/PIPE CUTTER 24' OF TRAVEL (UNLIMITED TRAVEL W/REPOSITIONING) TUBE SIZE - 0.5" TO 6" DIAMETER ROUND - 0.5" TO 4" SQUARE - 5.657" MAXIMUM HYPOTENUSE CORNER TO OPPO...

10' Power Brake Dies Compensating (NEW!)

This is a NEW Compensating Die Rail. Compensating Die Holder, 10' long. This is a NEW Compensating Die Rail.

DURMA PBH 45

• Manufacturer: Durma - Durmazlar
• Model: PBH 45

DURMA (NEW) MODEL PBH 45 PROFILE ANGLE BENDING ROLL 6.378" ROLL DIAMETERS 1.77" SHAFT DIAMETERS 1 AND 2 HP MOTORS 12.79 FPM BENDING SPEED STANDARD EQUIPMENT - HARDENED STANDARD ROLLS - MECHANICAL LATERAL GUIDE RO...

AKYAPAK APK 61

• Manufacturer: Akyapak
• Model: APK 61

AKYAPAK (NEW) MODEL APK 61 ANGLE BENDING ROLL 6.97" ROLL DIAMETER 2.36" SHAFT 21" FMB BENDING SPEED 5.4 HP FEATURES - ONE SET STANDARD ROLLS - ALL-STEEL (ST-52) CONSTRUCTION BODY - SHAFTS MADE OF SPECIAL STEL, HA...

ROUNDO R-62-S

• Manufacturer: Roundo

ROUNDO (NEW) MODEL R-62-S SECTION ROLL (3) DOUBLE PINCH ROLLS 7-1/8" TOP SHAFT DIAMETER 6-1-4" LOWER SHAFT DIAMETER 18" X 1/8" TOP AND LOWER ROLL DIAMETER 0-23 FPM ROTATION SPEED 20 HP FEATURES - UNIVERSAL MODULA...

DURMA PBH 60

• Manufacturer: Durma - Durmazlar
• Model: PBH 60

DURMA (NEW) MODEL PBH 60 PROFILE ANGLE BENDING ROLL 2.364" SHAFT DIAMETERS 7" ROLL DIAMETERS 4 + 2 HP 16 FPM TURNING SPEED 1-1/2" X 1-1/2" SOLID-SQUARE, 20" DIAMETER 2-1/2" X 3/16" ANGLE-LEG OUT, 32" DIAMETER 2-1...

BAILEIGH R-H85

• Manufacturer: Baileigh
• Model: R-H85

BAILEIGH (NEW) MODEL R-H85 ROLL BENDER CAPACITY - 3" PIPE (SCH 40) 63" MINIMUM DIAMETER - 4" ROUND TUBE (.120") 118" MINIMUM DIAMETER - 2.75" SQUARE TUBE (.157") 118" MINIMUM DIAMETER - 3.375" ANGLE IRON (.250") ...

ERCOLINA CE35

• Manufacturer: Ercolina
• Model: CE35

ERCOLINA (NEW) MODEL CE35 ANGLE ROLL 40 MM ROLL SHAFT DIAMETER MANUAL CENTER ROLL POSITIONING 1-1/2" SCH. 40 PIPE CAPACITY 1-1/2" X 1-1/2" X 1/4" ANGLE CAPACITY 6-5/8" O.DIA. UNIVERSAL TOOLING INCLUDED 6-12 RPM S...

WALDEMAR WDM AR-31

• Manufacturer: Waldemar
• Model: WDM

WALDEMAR (NEW) MODEL WDM AR-31 HYD. ANGLE ROLL 7.5 HP 3 PHASE MOTOR 9" ROLL DIAMETER 24 TONS BENDING PRESSURE 3" MAIN SHAFT DIAMETER 0-22 FPM ROLLING SPEED MINIMUM DIAMETER - CAPACITY 30" ANGLE LEG OUT 3" X 3" X ...

2007 ROUNDO R-5-S

• Manufacturer: Roundo
• Model: R-5-S

ROUNDO (USED) MODEL R-5-S 5" X 5" X 1/2" ANGLE LEG-OUT 4" X 4" X 1/2" ANGLE LEG-IN 8" X 2" FLAT IRON ON FLAT 6" X 5/8" FLAT ON EDGE 5" PIPE 8" I BEAM AND CHANNEL 2-3/4" TO 32" ID SQUARE BAR 3-1/2" TO 40" OD ROUND...

ROUNDO R-4-S

• Manufacturer: Roundo
• Model: R4

ROUNDO (NEW) MODEL R-4-S ANGLE ROLL ANGLE LEG CAPACITY - 4" X 4" X 1/2" LEG OUT - 4" X 4" X 3/8" LEG IN - 5" X 5/8" FLAT ON EDGE - 7" X 1-1/2" FLAT IRON ON FLAT 12.2" ROLL DIAMETER DRIVE ON ALL 3 ROLLS - INFINITE...

BAILEIGH R-M10

• Manufacturer: Baileigh
• Model: R-M10

BAILEIGH (NEW) MODEL R-M10 ROLL BENDER CAPACITY - 1" PIPE (SCH 40) 28" MINIMUM DIAMETER - 1.25" ROUND TUBE (.078") 31.5" MIN DIAMETER - 1.2" SQUARE TUBE (.078") 35" MINIMUM DIAMETER - 1.25" ANGLE IRON (.157") 30"...