Used Agitators, Blenders, Mixers in Bremen, Germany

Geared agitator 3 KW made of AISI 316 with 3 blades and 220 cm shaft length

• Manufacturer: Behälter KG

Other: Total flange diameter approx. 315 mm Bolt circle diameter approx. 270 mm 4 holes of 24 mm each

100 liter heatable/coolable pressure vessel made of stainless steel 304 with magnetic agitator

max. allowable working overpressure (dj): 5.0 bar max. allowable working underpressure (dj): 1,0 bar Temperature control cylinder (dj): double jacket material temperatur control system: stainless steel

15000 liter upright storage tank made of stainless steel 316 with propeller agitator on the side

remarks: The tank has only completed one test run with water

250 liter heatable/coolable pressure vessel made of stainless steel 304 with dispersing agitator

• Manufacturer: Schwarz

max. allowable working temperature: 100 °C max. allowable working overpressure (dj): 0.5 bar max. allowable working temperature (dj): 110 °C Temperature control cylinder (dj): double jacket temperature control bo...

620 liter mobile, heat-/coolable pharmaceutical pressure vessel, Aisi 316 with insulation and magnetic agitator

• Manufacturer: Hinke

max. allowable working temperature: 135 °C max. allowable working overpressure (dj): 4.0 bar max. allowable working underpressure (dj): 1,0 bar max. allowable working temperature (dj): 135 °C Temperature control ...

Unused 150 liter heatable/coolable pressure vessel made of stainless steel 316 with propeller agitator

max. allowable working temperature: 70 °C max. allowable working overpressure (dj): 1.5 bar max. allowable working temperature (dj): 80 °C Temperature control cylinder (dj): double jacket temperature control bott...

630 liter heatable/coolable mixing container made of V4A with ex-rated propeller agitator

• Manufacturer: Ahrens & Bode

max. allowable working temperature: 148 °C max. allowable working overpressure (dj): 3.5 bar max. allowable working temperature (dj): 148 °C Temperature control cylinder (dj): half-coil temperature control bottom...

Brand-new 4,0 KW / 1500 rpm high-speed propeller mixer-FIT/SL

• Manufacturer: Behälter KG

Technical documentation: drawing | Agitator: propeller | Agitator positioning: eccentrically in the upper bottom | Output speed: 1500 rpm | Voltage: 400 Volt | Power: 4.0 KW | Material in contact w/ medium: AISI...

Stainless steel container 0.05 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 3 feet, open at the top, with spray ring line, with lower conical bottom, clamp-on agitator disc, 0.37 kW, 1380 rpm, outlet Ø 15 bottom center

Stainless steel container 15 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 3 feet, height-adjustable, with conical bottoms, with anchor agitator centered from above, approx. 1.5 kW, approx. 25 rpm. Double jacket on the cylinder below for pressureless hea...

Stainless steel container 240 cbm

• Manufacturer: Sielmann

Design: Upright cylinder with inwardly curved lower base, sloped to the outlet. With a conical upper base. Propeller agitator installed at an angle in the cylinder below, 2.7 kW, 465/970 rpm. Insulation around th...

Stainless steel container 36.9 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 4 feet, height-adjustable, with conical bases, anchor agitator eccentric from above, 5.5 kW, 30 rpm, screws removed for transport, half-pipe coil around cylinder and lower base, 3...

Stainless steel container, 8 cbm

• Manufacturer: Sielmann

Operating data: 0.4 bar operating pressure, 100 °C operating temperature according to nameplate. Design: cylindrical, standing on 4 feet, height adjustable, with conical bottoms, inclined blade agitator eccentric...

Stainless steel container 30 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 4 feet, height-adjustable, with conical bottoms, propeller agitator installed diagonally below the cylinder - motor defective - Connections: 1 hinged lid dome Ø 430 in the upper b...

Stainless steel container 0.76 cbm

• Manufacturer: Sielmann

Dimensions: 800 mm diameter, 1,400 mm cylinder height, 107 mm upper base, 231 mm lower base, 850 mm agitator height, 400 mm ground clearance, 2,988 mm approx. total height. Design: Cylinder standing on 3 feet, wi...