Used Agitators, Blenders, Mixers in Germany

Second-hand twin-shaft ejection mixing kneader - BEETZ type MK-2/500.

• Manufacturer: Beetz

This is an ejection mixing kneader with two horizontal mixing shafts. Mounted on the mixing shafts are segmental blades which enable a specially careful processing of the product. The trough is jacketed and can b...

13,210 liter sparkling wine pressure tank/ storage tank/ steel tank 7 bar with lateral agitator mixer with propeller enameled, round upright 23-0559EUBA 23-0559EUBA

• Manufacturer: Thale

Cat. no.: 23-0559EUBA Condition: Used Units: 2 AS UNI-RILL Top floor: dished bottom2 crane eyes downwards drawn pressure line DN 25 Tank cylinder: Manhole oval 440 x 350 mmTasting tap Propeller agitator on the si...

Agitator tank/storage tank 500 liters with agitator on top, round, made of V2A 24-0150 24-0150

Cat. no.: 24-0150 Condition: Used Piece: 1 KK UNI-L Top shelf: open bottom : with threaded connection DN65with drain pipe pulled forward with disc valve DN 65with 3 feet

Stainless steel container 0.76 cbm

• Manufacturer: Sielmann

Dimensions: 800 mm diameter, 1,400 mm cylinder height, 107 mm upper base, 231 mm lower base, 850 mm agitator height, 400 mm ground clearance, 2,988 mm approx. total height. Design: Cylinder standing on 3 feet, wi...

2008 Color mixer Biaxo 101872

• Manufacturer: Farbmischer

Control: Emergency off/on/frequency control Mixed operation

Stainless steel container 100 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on a flat base, inside with a lower conical base and an upper conical base. Propeller agitator installed diagonally in the cylinder below. 5.0 kW, 960 rpm. Insulation around the cyli...

Stainless steel container 0.05 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 3 feet, open at the top, with spray ring line, with lower conical bottom, clamp-on agitator disc, 0.37 kW, 1380 rpm, outlet Ø 15 bottom center

Stainless steel container 0.03 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 3 feet, open at the top, with spray ring line, with lower conical bottom, clamp-on agitator disc, 0.25 kW, 1390 rpm, outlet Ø 15 bottom center

Stainless steel container 18 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 5 feet, with conical bottoms, inclined blade agitator from above, eccentric, 3/5 kW, 22/44 rpm. Connections: 1 manhole Ø 450 in the upper base, 2 spray heads, 1 sight glass DN 125...

Stainless steel container 0.1 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 3 feet, open at the top, with spray ring line, with lower conical bottom, clamp-on agitator propeller, 0.18/0.25 kW, 650/1390 rpm, 2 outlets DN 25

Stainless steel container 0.24 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 3 feet, open at the top, with spray ring line, with lower conical bottom, clamp-on agitator propeller, 0.18/0.23 kW, 650/1390 rpm, outlet 3 outlets DN 25

Stainless steel container 15 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 3 feet, height-adjustable, with conical bottoms, with anchor agitator centered from above, approx. 1.5 kW, approx. 25 rpm. Double jacket on the cylinder below for pressureless hea...

Stainless steel container 8 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 3 feet, screwable, with conical bottoms, inclined blade agitator from above, eccentric, 2.2 kW, 89 rpm, double jacket for pressureless heating/cooling, insulation around cylinder ...

Stainless steel container 240 cbm

• Manufacturer: Sielmann

Design: Upright cylinder with inwardly curved lower base, sloped to the outlet. With a conical upper base. Propeller agitator installed at an angle in the cylinder below, 2.7 kW, 465/970 rpm. Insulation around th...