Used Agitators, Blenders, Mixers in Bremen, Germany

500 liter mobile tank, Aisi 304 with propeller agitator

remarks: Hand hole diameter: approx. 140mm with sight glass;

990 liter atex-proof agitator vessel, AISI 304

EX-proof: motor is ex-proof (compliance with the new ATEX directives must be verified, taking into consideration the local conditions)

100000 isolated storage tank, Aisi 304 with propeller agitator

• Manufacturer: ABAB Allgemeine Behälter- u. Apparate Bau

remarks: standing frame made of concrete; Outlet nozzle installed vertically downwards

25000 liter tank, Aisi 304 with lateral propeller agitator

remarks: Manhole approx. 470 x 400 mm; 1 dent in the cylinder

Stainless steel tank 26 cbm with agitator and air insulation

1 cyl. upright stainless steel tank, used Contents: 26 cbm Order number: 4242 Material: V2A Dimensions: 2,800 mm diameter 2,920 mm diameter 4,000 mm cylindrical height 500 mm upper floor 300 mm lower flo...

Stainless steel tank 51 cbm with agitator, heating and insulation

• Manufacturer: Apparate und Behälter Harrislee GmbH

1 cyl. upright stainless steel tank, used Contents: 51.4 cbm Order number: 4302 Material: V2A Weld seams ground inside Dimensions: 3,200 mm i. diameter 3,360 mm diameter 6,000 mm cylindrical height 550 m...

8000 liter insulated tank, Aisi 304 with lateral propeller agitator

remarks: Minor differences in the design of the two tanks (e.g. location of the outlets); Manhole diameter approx. 510 mm; a former manhole and 1 connection in the lower cylinder area were welded shut by the prev...

6000 Liter isolated mixing tank, Aisi304 with blades agitator

• Manufacturer: Apparate- und Behältertechnik Harrislee

remarks: 1 tank without agitator; existing double jacket defective (connections have been removed)

1183 liter pressure vessel, Aisi 316 with propeller agitator

max. allowable working temperature: 200 °C remarks: Frame made of 1.4301 (Aisi 304); 1 hand hole diameter approx. 310 mm with flanged, open attachment (diameter approx. 270 mm) on top of the vessel

6500 liter tank, Aisi 304 with inclined blade agitator

• Manufacturer: Behälter KG

remarks: smaller dents possible; height-adjustable screws partly bent; on 1 tank, feet slightly pressed into the lower bottom EX-proof: motor is ex-proof (compliance with the new ATEX directives must be verified,...

500 liter heat-/coolable tank, Aisi 316 with magnetic agitator

• Manufacturer: Bolz

Temperature control cylinder (dj): double jacket remarks: An internal double jacket was subsequently welded into the tank by the previous operator, which reduces the volume specified on the type plate to approx. ...

15000 liter insulated tank, Aisi 304 with lateral propeller agitator

• Manufacturer: Ahlborn

technical equipment: ventilation, butterfly valve, spray ball, crane eyes remarks: Manhole diameter approx. 415 mm; tank with adhesions inside; slight corrosion on the inside and outside of the tank agitator feat...

665 liter heat-/coolable tank, Aisi 316 with magnetic agitator

• Manufacturer: Binder

max. allowable working temperature: 80 °C max. allowable working overpressure (dj): 4.0 bar max. allowable working underpressure (dj): 1,0 bar max. allowable working temperature (dj): 80 °C Temperature control cy...

400 liter pressure tank, Aisi 316 with inclined blade agitator

• Manufacturer: Bollazzi

max. allowable working temperature: 150 °C Technical documentation: drawing,various documents ,certificate of inspection,CE label and declaration of conformity,operation manual EX-proof: motor is ex-proof (compli...

500 liter heat-/coolable tank, Aisi 304 with propeller agitator

Temperature control cylinder (dj): double jacket remarks: Hand hole diameter 200 mm; Foot frame, Aisi 304 with upper ring made of Fe; other external parts made of Fe (e.g. heating connections; el clamp screws of ...