Used Correa Dryers

Dryer-Flaker Drum and Belt R.Simon Dryers Stearine acid Stainless Steel 316 - IPP# 215236

• Manufacturer: Correa

single drum flaker, with dip tray working pressure 6.9 bar max, design pressure 6.9 bar @ 170 degrees C steam heated drum with rotary unions drum speed variable from 0.7 to 7 rpm, adjustable knife discharge with ...

Dryer-Flaker Drum and Belt - IPP# 703637

• Manufacturer: Correa

chrome plate drum only For use with Gouda drum flaker

Dryer-Flaker Drum and Belt 300 mm (11.8 in) - IPP# 704614

• Manufacturer: R.Simon Dryers

face chrome plated single drum flaker/dryer Drum working pressure 5.5 bar, speed 3 to 21 rpm, cored for steam/hot oil heating

Carbon Steel Dryer-Flaker Drum and Belt - IPP# 239473

• Manufacturer: Bethlehem Corp

Universal Twin Cylinder 12" x 8" lab sized dryer, flaker.

Stainless Steel Dryer-Flaker Drum and Belt - IPP# 228256

• Manufacturer: Berndorf belt systems

belt flaker, with Accu-Drop Pastillator and Variable Speed Drive Belt system is 60" wide x 75 feet long. With six (138" x 59" x 5'5") water collectors 190 Gallon rated for 55 degrees F Six water spray systems, 11...

Dryer-Flaker Drum and Belt 1,050 mm (42 in) - IPP# 49609

chrome plated drum only Cast iron construction

Dryer-Flaker Drum and Belt 28 mm (1.1 in) - IPP# 70983

• Manufacturer: Correa

chrome plated single drum flaker Drum pressure 0.42 bar DC thyristor controlled varispeed drive. Roll speed 10-100 rpm. Heating low pressure steam system of 0.1 bar. Doctor manual adjustable knife made of carbon ...

Dryer-Flaker Drum and Belt 203.2 mm (8 in) - IPP# 34426

• Manufacturer: Stokes

Stokes 2-roll chrome plated flaker Has cored rollers for heating and cooling Has knife discharge Fixed roll spacing Masters gearhead varispeed motor UL labelled motor

Dryer-Flaker Drum and Belt 1,500 mm (60 in) Carbon Steel - IPP# 28792

• Manufacturer: Blaw Knox

Single drum flaker Grooved drums, 1/8" groove every 1" 316SS vac chamber housing. W/spare drum Roll face is grooved on 1' spacings

Dryer-Flaker Drum and Belt 1,200 mm (47.2 in) Stainless Steel - IPP# 203809

• Manufacturer: Kaiser Steel Belt System

with Type ZN stainless steel dosing system (tube needle system) can be heated rated 100 to 200 KG/Hr Unit has an endless belt 1.2 meter wide, 1mm thick,x 11.14 meter total length, 4 Meter working area with 1.4541...

Dryer-Flaker Drum and Belt 1,200 mm (47.2 in) Stainless Steel - IPP# 203810

• Manufacturer: Kaiser Steel Belt System

ZN stainless steel dosing system (tube needle system) can be heated, rated 100 to 200 KG/Hr. Unit has an endless belt Unit has an endless belt, 1.2 meter wide, 1mm thick,x 11.14 meter total length, 4 Meter workin...

Dryer-Flaker Drum and Belt 1,200 mm (47.2 in) Stainless Steel - IPP# 203808

• Manufacturer: Kaiser Steel Belt System

Pastillator with type: ZN stainless steel dosing system (tube needle system) can be heated, rated: 100 to 200 kg/hr, unit has an endless belt 1.2 meter wide, 1 mm thick x 11.14 meter total length 4 meter working ...

Dryer-Flaker Drum and Belt 610 mm (24 in) Stainless Steel 304 - IPP# 210324

• Manufacturer: Steel Belt Systems

(2) 20” wide water cooled Rolls are driven by a varispeed drive, one roll is 7" diameter, the other is 16" diameter Material drops onto a stainless steel water cooled belt (similar to a Sandvick). With lump break...

Dryer-Flaker Drum and Belt 1,500 mm (59.1 in) Stainless Steel - IPP# 706652

• Manufacturer: Sandvik

1.5m wide x 24.85m long rotoform cooling conveyor/belt Drawing Number 6530. 5m long hot water section 17.5m cooling water section Cooling water capacity: 185 GPM @ 30 psi, Hot water zone has 16 sprays x 4 runs x ...

Dryer-Flaker Drum and Belt 600 mm (23.6 in) Stainless Steel 316 - IPP# 704988

• Manufacturer: APV Mitchell

drum flaker/dryer Single drum design Drum and applicator roll cored for steam heating Drum driven by Carter gearbox, Size MF14/100340 2.71 KW @ 960 rpm belt driven by 3 KW, 3/50/415 volt, 700 rpm flameproof motor...