Used processing

Ormont DU-44

• Manufacturer: Ormont
• Capacity: 40,000 kilogram

– Distance Between Side Housings: 63″ – Table Size: 30″ x 60″ – Cutting Head Area: 30″ x 60″ – Stroke: 4″ – Daylight Opening: 12″ – Floor to Top of Bed: 31″ – Horsepower: 5 H.P. – Dimensions (W x D x H): 86″ x 47...

Stewart Bolling Heated Hydraulic Press

• Manufacturer: Stewart Bolling

Equipment Overview Well-maintained Stewart Bolling 200 Ton heated platen press, recently decommissioned. Control systems and pump motor replaced ~3 years ago; platens resurfaced; minimal pneumatic/hydraulic issue...

12 Ton Carver Press, Model C, 6" x 6"

• Manufacturer: Carver

12 Ton Carver Press, Model C, 6" x 6" Used Carver Bench Top Press, Model C, 12 ton compression, 6" x 6" platen, electrically heated upper platen, missing lower platen, hand hydraulic pump, Serial No. 25576-960.

12 Ton Carver Press, Model C, 6" x 6"

• Manufacturer: Carver

12 Ton Carver Press, Model C, 6" x 6" Used Carver laboratory press, model C, 12 ton capacity, 6" x 6" platens, serial# 35000-330.

30 Ton Wabash Genesis Press, Model G302-CX, 12" x 12"

• Manufacturer: Wabash
• Model: G302-CX

30 Ton Wabash Genesis Press, Model G302-CX, 12" x 12" Used 30 ton Wabash Genesis platen press, model G302-CX, 12" x 12" platens, steam heated, water cooled, (2) daylights, approximately 4" daylight, 17" wide tie ...

30 Ton Wabash Press, Model 30-1212-4STMBX, 12" x 12"

• Manufacturer: Wabash
• Model: 30-1212-4STMBX

30 Ton Wabash Press, Model 30-1212-4STMBX, 12" x 12" Used 30 ton Wabash press, model 30-1212-4STMBX, 12" x 12" platens, steam heated, water cooled, (2) daylights, approximately 3" daylight spacing, 14.5" wide tie...

Brown Trim Press, Model T-300

• Manufacturer: Brown
• Model: T-300

Brown Trim Press, Model T-300 Used Brown model T-300 trim press, 11.75" x 37.5" wide cutting window, driven by ac motor, with canopy, control panel, 480 volt, serial# 8791.

62.8 Ton FH Maloney 4 Post Molding Press, 16" x 16"

• Manufacturer: FH Maloney

62.8 Ton FH Maloney 4 Post Molding Press, 16" x 16" Used FH Maloney 4 post molding press, 200 ton capacity rerated to 62.8 ton capacity, 16" x 16" electrically heated platens, 10.5" max daylight, 8" diameter main...

Goodnature SX280 Squeezebox Press for Juice Processing #4183011

• Manufacturer: Goodnature

Goodnature Model SX280 Squeezebox juice press. Rated for 2.5 to 5 tons, 450 to 1,000 gallons per hour. Capable of producing up to 50,000 gallons per week. The press uses high pressure squeezing to run various pro...

2021 Dr. Fritsch DSP 517 #51350

• Manufacturer: Fritsch

From Dr Fritsch Literature ~ “The DSP 517 is an automatic pressure sintering press for sintering metal-, ceramic- or resin-bonded workpieces. It works according to the principle of resistance heating by means of ...

Brown Dual Fly Wheel Trim Press, 43" x 12.5" Opening

• Manufacturer: Brown

Brown Dual Fly Wheel Trim Press, 43" x 12.5" Opening Used 43" x 12.5" opening Brown dual fly wheel trim press with operator controls, AC motor with multi-speed gearbox belt driven to flywheels

1970 HASENCLEVER HYD. HSPR 450/1000/600

• Manufacturer: Hasenclever
• Model: HSPR 4501000600

3000 TON SCREW PRESS Capacity: 3000 TON | Mode of operation: Mechanical/Hydraulic | Nominal capacity: 2000T | Spindle dia.: 450mm | Allowable max. capacity at continuous process: 3150T | Max. possible force: 4000...

CONTECH ULTRA PRESS MODEL UP-2842 HOT PRESS

Contech Ultra Press Model UP-2842, 220 Volt three phase, 60 hz, 100 amps, Max air pressure 100 psi, 28" x 42" platen area, Shuttle type work table with front loading station, Built in hydraulic pump and tank, Two...

Used Netzsch Inc. Model 800 MM/I/38 poly propylene plate and frame press

• Manufacturer: Netzsch
• Model: 800 MMI38

Used Netzsch Inc. Model 800 MM/I/38 poly propylene plate and frame press. S/N 400-691. Unit has 37 plates plus the head and end plate. Recessed plates are center fed and equipped with filter cloths. Has 38 chambe...

Used JWI/US Filter Model 1000G32-60-DYL 50 cu ft Poly plate and frame press

• Manufacturer: US Filter
• Model: 1000G32-60-DYL

Used JWI/US Filter Model 1000G32-60-DYL 50 cu ft Poly plate and frame press. 61 Poly plates are 1000 X 1000 mm + the head and end plate. Center feed with 4 corner discharge. Has air over hydraulics closing system...