Used processing in Japan

Shinko Electric FH-33 BDT
- Manufacturer: Shinko
Remarks No controller Material: SUS | Quantity saved: One | Size: External dimensions: 800W x 2000L x 700H Trough internal dimensions: 610W x 1067L
Hiroshima, Japan
Dalton 1001
- Manufacturer: Dalton
Screening frame diameter: φ1000, 1 stage, 2 types Motor 1.5kw cassette screen With casters There are dents on the frame and the discharge port.
Hiroshima, Japan
Mitsubishi / Maki Shinko WEX 80
- Manufacturer: Mitsubishi
MOTOR: Mitsubishi 0.75kw/4p 1400rpm/50Hz RATIO: 1/20
Hiroshima, Japan
1991 Tanabe CO-24 type
- Manufacturer: Tanabe
24-inch type, top discharge type, with manual brake
Kure, Japan
Sash Cutting Machine
- Manufacturer: NISHINO
Tosu, Japan
Hata Ironworks TC-E 2
- Manufacturer: Hata Ironworks
One specification with coarse mesh. A detailed specification 1 unit. There is one thing in the middle. ※ Mesh size required Remove powder and burr by rotating action of spiral drum and SUS made mesh cylinder. ※ Q...
Hiroshima, Japan
Daito Dairy Industry Horizontal type
- Manufacturer: Daito
With stirrer (bladed out item) Power: 0.4kw | Material: SUS | Quantity saved: One
Hiroshima, Japan
2003 KANZAKI TPB-25×3200 Bending Roll 3 Rolls
- Manufacturer: KANZAKI
Corner piece:t25*3050, Cylindrical bend:t28*3050, upper roll:φ520, lower roll:φ330, sirinder rod diameter:135, sirinder outer diameter:325
Ishikawa, Japan
Process Line
- Manufacturer: SAMIIL MACHINERY CO., LTD.
Engineering: MHI SES
Japan
C176073 Three rolls Kawai Mfg.
- Manufacturer: Kawai Seisakusho
1250×3 3-phase 200V If there is any discrepancy between the contents and the actual product, the actual product will take priority.
$4,056 USD
Tatebayashi, Japan
1986 NCC NCC-300
- Manufacturer: NCC
Three-phase 200 V 50/60 Hz Table dimensions 500 x 500 mm, weight 250 kg Photographs are of an uncleaned condition. If there is any discrepancy between the contents and the actual product, the actual product will ...
$1,352 USD
Tatebayashi, Japan
1983 ncc ncc-500
- Manufacturer: NCC
In case of any discrepancy between the content and the actual product, the actual product will take precedence.
Tatebayashi, Japan
1988 Showa Seiko CL-65
- Manufacturer: Showa Seiko
Punching: Pressing pressure 45t Diameter 25 x Thickness 16 L-shaped steel cutting: 90φ cutting ⇒ 13 x 100 x 100 Fuse cutting, 45φ cutting ⇒ 9 x 75 x 75 Bar steel cutting (round bar) 38φ (square bar) 34φ Shearing:...
Tatebayashi, Japan
1992 LUXO SE-400(L-400)
- Manufacturer: Laxou
Three-phase 200 V, table dimensions 600 x 600 mm, with feeder If there is any discrepancy between the contents and the actual product, the actual product will take precedence.
$3,042 USD
Tatebayashi, Japan
1991 Nikotech RFB-8020
- Manufacturer: Nicotech
80t, table length 2000, stroke length 100, with safety device (Komori / DSP-J) *The machine was used at a school. In case of any discrepancy between the contents and the original, the original will be given prior...
Tatebayashi, Japan