Building Filters
- Trusted Seller
Flash pasteuriser
- Manufacturer: API Schmidt-Bretten GmbH Co. KG
consisting of: - SIGMATHERM plate heat exchanger (heat exchange surface 21.5 m²) - Forerun tank 1200 l - Hilge product pump with manual control valve - Hilge hot water circulation pump - 500 l expansion tank...
Freising, Germany - Trusted Seller
plate heat exchanger
- Manufacturer: API Schmidt-Bretten GmbH Co. KG
plates in stainless steel, end plates in steel painted
Freising, Germany - Trusted Seller
plate heat exchanger
- Manufacturer: API Schmidt-Bretten GmbH Co. KG
plate heat exchanger complete in stainless steel Pressure chamber 1: volume: 91 l at 6 bar | Pressure chamber 2: volume: 93 l at 6 bar | Clamping dimension: 350 mm | Max. temperature: 100 °C
Freising, Germany - Trusted Seller
Flash pasteuriser
- Manufacturer: GEA Group Aktiengesellschaft
Flash pasteurising to stabilise beverage quality. The product is heated via a plate heat exchanger and held at pasteurising temperature for a defined amount of time, after which it is then cooled down again.
Freising, Germany - Trusted Seller
2 ONDA plate heat exchangers CT 354/S
- Manufacturer: Onda
The heat exchangers are part of a cooling center with three chillers, which are also for sale. They were used for hydraulic separation between the chiller circuit and the heating/heat recovery circuit. Viewing po...
Schierling, Germany - Trusted Seller
plate heat exchanger
- Manufacturer: Sondex
Two-stage plate heat exchanger for cooling wort. Approximately 10 hl of wort can be cooled in one hour. In the first stage (pre-cooler), the wort is cooled from 96°C to 15°C (while simultaneously heating the bre...
Freising, Germany - Trusted Seller
plate heat exchanger
- Manufacturer: thermowave
Single-stage plate heat exchanger, previously used for wort cooling in a 15 hl brewhouse. Flow rate product approx. 10 hl/h. Inlet temperature 75°C, outlet temperature 20°C. Cooling water temperature approx. 13°C.
Freising, Germany - Trusted Seller
Plate heat exchanger
- Manufacturer: Alfa-Laval
Two-stage counterflow plate heat exchanger: Section 1: Heating or regeneration: Product/product Product inlet 6°C, outlet 66.2°C, Flow rate 300 hl/h Product inlet 72°C, product outlet 69.8°C Flow rate 300 hl/h ...
Freising, Germany - Trusted Seller
plate heat exchanger
- Manufacturer: FISCHER Maschinen- u. Apparatebau GmbH
Capacity: 250 hl/h | Pressure: 16 bar | Length: 3.000 mm | Width: 750 mm | Height: 2.246 mm | Weight: 3150 kg | Material: plates: 1.4404/0,8mm 196 WAP, 59 HHP, 3 AP / seals: Perbunan PRESS IN | Base construction...
Freising, Germany - Trusted Seller
plate heat exchanger
- Manufacturer: VBW Weihenstephan
Additional title: wort cooler | Capacity: 150 hl/h | Pressure: 6 bar | Max. temperature: 100 °C | Length: 2550 mm | Width: 900 mm | Height: 2000 mm | Weight: 1080 kg | Material: stainless steel | Base constructi...
Freising, Germany - Trusted Seller
glycol cooler
- Manufacturer: vbw-weihenstephan
Additional title: plate heat exchanger | Operating pressure side 1: 16 bar | Operating pressure side 2: 16 bar | Operating temperature: 90 °C | Weight: 638 kg | Base construction: on frame, insulated
Freising, Germany - Trusted Seller
NH3 condensers
- Manufacturer: Kelvion Holding GmbH
Additional title: plate heat exchanger | Operating pressure side 1: 10 bar | Operating pressure side 2: 25 bar | Operating temperature: 90 °C | Weight: 936 kg | Base construction: on frame
Freising, Germany - Trusted Seller
Plate heat exchanger
- Manufacturer: thermowave Gesellschaft für Wärmetechnik mbH
Length: 87 mm | Weight: 131 kg
Freising, Germany - Trusted Seller
Freising, Germany - Trusted Seller
plate heat exchanger
- Manufacturer: GEA Ecoflex
Single-stage plate heat exchanger for cooling the mash while simultaneously heating water.
Freising, Germany