Used processing in Germany

1991 LAEMPE SM 5 3.5 T
- Manufacturer: Laempe / Röperwerk
Charge 70 kg, cycle time 70 s, capacity approx. 3.5 t/h, drive power 5.5 kW, connected loads 380 V, 50 Hz, volumetric sand dosing, binder dosing, control system
Meinerzhagen, Germany
2015 SEGAB PROMIX 150
- Manufacturer: Segab
Charge min./max. 50/150 kg, capacity approx. 3 t/h, pneumatic discharge lock, drive power 9.2 kW, connected loads 400 V, 50 Hz, safety interlock (on cleaning door and mixer hood)
Meinerzhagen, Germany
VOGEL & SCHEMMANN MISCHKA III GF-S/70 'D'
- Manufacturer: Vogel
Batch max. 500 kg, hopper Ø 925 x 600 mm, discharge height approx. 1000 mm, mixing paddle, pneumatic discharge gate, drive power 10.3 kW
Meinerzhagen, Germany
2006 SEGAB PROMIX 150
- Manufacturer: Segab
Divided daily silo (new sand/regenerate) 2 m³ each, dedusting filter, 2 sand heater separators, sand dosing, batch mixer 150 kg, ColdBox component dosing, core sand distribution car, electric PLC control system
Meinerzhagen, Germany
1999 MICHEL / GTG - Gießereitechnik GÖTZ KSA 700 017
- Manufacturer: MICHEL / GTG - Gießereitechnik GÖTZ
Sand storage hopper, electronic sand scales, stationary 100 kg batch mixer, ColdBox component dosing, sand distribution system, steel support structure (incomplete), PLC control system
Meinerzhagen, Germany
2014 REISSAUS & BAUMBERG KSA 40
- Manufacturer: REISSAUS & BAUMBERG
Shooting volume 40 l, horizontal core box division, core box max. 1250x1050x980 mm, ISS continuous core sand mixer TRITON TS2 (1992), sand hopper, cabin, hydraulic unit, control panel, PLC control SIEMENS S7
Meinerzhagen, Germany
1991 LAEMPE Kernschießautomat L-10 HB
- Manufacturer: Laempe / Röperwerk
Four-column machine, shooting volume 10 l, horizontal/vertical core box divider, clamping & separating device, electric heating plates, discharge carriage, gassing carriage, hydraulic unit, safety cabin, sand hop...
Meinerzhagen, Germany
RÖPER H 2,5
- Manufacturer: Laempe / Röperwerk
Table machine, shooting volume 2.5 l, core box max. 280x 280/400 x 225 mm, manual adjustment of the upper part, clamping device, vibrating feed chute, manual lever control
Meinerzhagen, Germany
RÖPER H 2,5
- Manufacturer: Laempe / Röperwerk
Table-top machine, shooting volume 2.5 l, core box max. 280x 280/400 x 225 mm, manual adjustment of the upper part, clamping device, vibrating feed chute, housing, electric PLC control, two-hand control panel, Co...
Meinerzhagen, Germany
1999 LAEMPE Kernschießautomat LKFZ 40 (L-40)
- Manufacturer: Laempe / Röperwerk
- Model: LKFZ 40
Shooting volume 40 l, vertical/horizontal core box division, core box max. 1000 x 650/1190 x 900 mm, vacuum clamping/separating device, sand hopper, cabin, gassing device, hydraulic unit, core sand mixer SM7_3t/h...
Meinerzhagen, Germany
VOGEL & SCHEMMANN MISCHKA II
- Manufacturer: Vogel
Charge max. 200 kg, container Ø 770 x 400 mm, capacity max. 2.4 t/h, drive power 7.5 kW, connected loads 380 V, 50 Hz, hand lever door lock, intervention protection, emergency stop pressure switch, hinged lid wit...
Meinerzhagen, Germany
2008 FOUNDRY SERVICE Krangießpfanne
- Manufacturer: FOUNDRY SERVICE
Capacity approx. 2,000 kg Fe / 700 kg Al, clear ladle Ø 800 x 1,000 mm, total height approx. 1,800 mm, empty weight (without FF lining) approx. 700 kg, ladle suspension, self-locking oil bath gearbox, type RSD 80...
Meinerzhagen, Germany
Sand dosing container
Tank for volumetric sand dosing, double conical truncated cone, welded in the middle, capacity approx. 70 l / 100 kg, each with a flange-mounted, pneumatically actuated rotary valve at the inlet/outlet, flange si...
Meinerzhagen, Germany
2014 KLEIN Balgdosiergerät BDG 504 (EFV)
- Manufacturer: Klein
Dosing volume 200-500 cm³, electrical (adjustment) remote adjustment (EFV)
Meinerzhagen, Germany
2006 KLEIN Balgdosiergerät BDG 304
- Manufacturer: Klein
Dosing volume 200-300 cm³
Meinerzhagen, Germany