Used processing in Sweden

Dough kneader BTF KONIK1 -2019 #2343

• Manufacturer: BTF

Tested, works fine

Traysealer Multivac T200 #2339

• Manufacturer: Multivac
• Model: T200

Cleaned the pump and serviced Works fine Mould: 250x140mm

Cutting machine Berkel 800s #2181

• Manufacturer: Berkel

Change bearings in motor Replace bearing in knife head Change the bearing to the belt tensioner Missing safety switch The knife wobbles a bit, but runs quietly and nicely

Blast Chiller #2315

• Manufacturer: Electrolux

Test run OK

Heating stand UM50D #2277

Test drive works

Oven Schmidt convector 33x43cm #2207

• Manufacturer: Schmidt

Change the power cable Change power button Internal grid 43x33cm Test run OK

Vacuum filler Risco -2008 with minced meat portioner -2015 #2040

• Manufacturer: Risco

Vacuum filler: Replace mini relay for lift on circuit board. Change oil+filter in vac pump. Portioner Test driven without remarks. Grinding disc: 1.8mm, 2mm, and 3mm.

Koppens ER600HD

• Manufacturer: CFS/Koppens

Bearing for fan motor replaced Refurbished engine bed for driving mesh belt. New chain. New mesh belt New hose för fan Sold in combination with breader #1929

Chicken Grill Fri-Jado -2003 #1969

• Manufacturer: Frijado

Tested, works well.

Henkelman Boxer 42 XL

• Manufacturer: Henkelman
• Model: Boxer 42

Chambers Dimensions: 460x420x180 mm Machine Dimension: 616x493x440 mm Welding beam: 420 mm Vacuum pump: 21 m3/h Machine Cycle: 15-35 sec Power: 0.55 kW

Sink 145x60cm

Description Stainless steel sink The legs are not stainless length 1450 width 600 height 900

Dishwasher Wexio WD-7E #2672

• Manufacturer: Wexiodisk

New gas shock absorbers Test driven.

Cutter Kilia 65liter #2665

• Manufacturer: Kilia

New bearings and seals for the blade shaft. New bearings and seals for the engine scraper. New piston seals for the scraper. Replaced the mechanical tachometer with a new magnetic sensor. Vacuum chamber resealed....

Rational oven CD201 -1999 #2638

• Manufacturer: Rational

Test run works. No steam.

SlicerMHS PCE65T -2001 #2629

• Manufacturer: MHS

Works well from 15mm and down, above 15mm it gets stuck. Works great if you are going to run thin discs!