Used Extruders

Gloucester 25225R2 Single Screw Extruder – 2.5" Dia., 32:1 L/D, 60 HP Motor
- used
- Manufacturer: GloucesterGloucester
10755152 Used Gloucester Single Screw Extruder, Model 25225R2. 2.5' Diameter Screw, 32:1 L/D. Has an electrically heated, air cooled, and non-vented barrel at approximately a 65? center line height. Barrel is se...
Belvidere, IL
Trusted Seller
1995 HPM TMIII
- used
- Manufacturer: HPM
- Model: TMIII
Used 4.5” HPM Single Screw Extruder 30/1 L/D Model: TMIII Year: 1995 6" x 6" top center feed throat Driven by a 250 hp DC motor, 460 volt AC input and a Powertec motor control with 460 volt 50/60 Hz AC input. Gea...
Hainesport, NJ
Gloucester 3.5" Single Screw Extruder – Model 35250R2, 32:1 L/D, 100 HP Motor
- used
- Manufacturer: GloucesterGloucester
10755150 Used Gloucester 3.5" Single Screw Extruder, Model 35250R2. 3.5" diameter screw, 32:1 L/D. Having an electrically heated, air cooled, and non-vented barrel at approximately a 65" center line height. Barre...
Belvidere, IL
Trusted Seller
Wayne 1.25"
- used
- Manufacturer: Wayne
Used 1.25” Wayne Single-Screw Extruder Driven by a 7.5 hp DC motor with SCR control,230 volt
Hainesport, NJ
APV Baker Perkins MP50/25D Twin Screw Extruder – 330 LBS/HR Capacity
- used
- Manufacturer: Baker Perkins
51164005 Used APV Baker Perkins Twin Screw Extruder, type MP50/25D. 50 mm dia. twin screws. 25:1 L/D. Co-rotating. Electrically heated, water cooled. Max Screw speed 500 RPM via a gearbox by a 55.2 KW (74hp)-3/50...
Belvidere, IL
6″ NRM PM III -30:1 VENTED – AIR COOLED EXTRUDER
- used
- Manufacturer: NRM
6″ NRM PM III -30:1 VENTED – AIR COOLED EXTRUDER REBUILT – approximately 43″ centerline height, gearbox having new bearings and seals with cooling system – new heat exhanger and pump, 30:1 L/D 8 zone barrel, cast...
Rockville Centre, NY
Trusted Seller
DAVIS STANDARD 4.5"
- used
- Manufacturer: Davis-Standard
Used 4.5" Davis Standard 30/1 L/D Extruder, Electrically Heated Air Cooled Barrel. Includes gearbox with 17.36/1 gear ratio rated at 321 hp. Serial #M3316, SO #05432. New 10/1991. Includes Kryenborg Type K-SWE-12...
Hainesport, NJ
Werner & Pfleiderer Mixer/Extruder – Type UK12-AU3, 21 Gallon Capacity, Carbon Steel
- used
- Manufacturer: WP
48594 Used Werner & Pfleiderer Mixer/Extruder, Type UK12-AU3. 21 Gallon (80 liter) working capacity, 29.1 gallon (110 liter) total capacity. Material of construction is carbon steel on product contact parts. 20-1...
Belvidere, IL
Pre-Owned Killion KL-075 Single Screw Extruder – Electrically Heated, Air-Cooled
- used
- Manufacturer: KillionKillion
54037006 Used Killion KL-075 Single Screw Extruder. 19.1 mm Diameter screws. 25:1 L/D. Screw speed 12-120 RPM via a gearbox by a 1.1 kW-380 volt/50cycle/3Ph DC motor. 3 housing sections. Electrically heated, air ...
Belvidere, IL
Trusted Seller
DAVIS STANDARD 150INDS-20
- used
- Manufacturer: Davis-Standard
Used 1.5” Davis Standard Vented Single-Screw Extruder Model: 150IN DS-20 Driven by a nontagged motor and a Reliance model GV3000 AC drive Gearbox: 6.53:1 ratio, rated for 50 hp, 1.25 service factor, 152 rpm screw...
Hainesport, NJ
Trusted Seller
1997 DAVIS STANDARD 5.11"
- used
- Manufacturer: Davis-Standard
Used 130mm (5.11") 30/1 L/D Non-Vented Davis Standard Extruder. Driven by 250 hp DC motor with 42" centerline air cooled barrel. Includes heat panel (without temperature controller), SCR controller and 6" continu...
Hainesport, NJ
Trusted Seller
2000 DAVIS STANDARD 5.11"
- used
- Manufacturer: Davis-Standard
Used 130mm (5.11") 30/1 L/D Non-Vented Davis Standard Extruder. Driven by 250 hp DC motor with 42" centerline air cooled barrel. Includes heat panel (without temperature controller), SCR controller and 6" continu...
Hainesport, NJ
Trusted Seller
1991 DAVIS STANDARD 4.5"
- used
- Manufacturer: Davis-Standard
Used 4.5" Davis Standard 30/1 L/D Extruder, Electrically Heated Air Cooled Barrel. Includes gearbox with 17.36/1 gear ratio rated at 321 hp. Serial #M-3315, SO #05432. New 10/1991. Includes Kryenborg Type K-SWE-1...
Hainesport, NJ
Welex 3.5" 30:1 L/D Extruder – 150 HP, Vented Barrel, Melt Pump & Screen Changer
- used
- Manufacturer: Welex
10755146 Used Welex 3.5" 30:1 L/D Extruder. Electrically heated water cooled (closed loop) and vented barrel at an approximate 69" center line height. Center line height can be reduced approximately 8" by removin...
Belvidere, IL
Comac EBC 40HT/37D Twin Screw Extruder – 600 RPM, 550 LBS/HR
- used
- Manufacturer: Comac
52622001 Used Comac Twin Screw Extruder, Type EBC 40HT/37D. 40 mm, 37:1 L/D. Production capacity 330-550 lbs/hr. (150-250 Kg/hr.). Maximum screw speed 600 RPM via a gearbox by 51 Kw AC Exp. motor. 7 housing secti...
Belvidere, IL