Used processing in Saxony, Germany

PAGUS conveyor belt

• Manufacturer: Pagus

Conveyor belt, belt conveyor PAGUS 1250 x 580 mm 4.8 rpm 220 / 400 V used, tested !

PAGUS roller conveyor

• Manufacturer: Pagus

Roller conveyor, rotating conveyor belt All rollers driven. Stainless steel frame. GROSCHOPP 220 / 380 V rotatable with elec. drive in 90° steps 220 / 380 V other parts available !

PAGUS conveyor belt

• Manufacturer: Pagus

Conveyor belt PAGUS 400 x 2480 mm Chain gear ratio: 1 : 1 Gear motor: SEW S31 DT71K-4 0.15 kW 67 rpm 220 / 380 V 3AC 50 Hz used, tested !

PAGUS roller conveyor

• Manufacturer: Pagus

Roller conveyor, conveyor belt PAGUS 4070 x 460 mm Belt gear ratio: approx. 1 : 1.5 Gear motor: SEW R32DT80K4 0.55 kW 102 rpm 230 / 400 V 3AC 50 Hz used ! tested !

TAKRAF conveyor belt roller

• Manufacturer: Takraf

conveyor belt roller, return pulley, belt pulley, conveyor belt roller TAKRAF, CONVEYOR EQUIPMENT ASCHERSLEBEN Ø 500 mm TGL 24505 used, tested !

MASS depaneling machine with conveyor belt

Depaneling machine with conveyor belt MASS SONDERMASCHINENBAU GmbH Depaneling machine: TVA/18 Inlet: width: max. 105 mm, height: max. 20 mmm 0.1 kW 230 V 1AC 50 Hz Conveyor belt: TS 110-22 0.05 kW 230 V 1AC 50 Hz...

Swarf Conveyor

Scraper belt conveyor made of sheet steel construction Further technical details: -profile height (B1) 160mm -Profile width (F) 300mm -Chip inlet width (F1) 160mm -Chip length (A) 1700mm -Bottom clearance (I) 20m...

2010 Richter SP 450 / 63

• Manufacturer: Richter
• Power requirement: 0.75 kilowatt

Made of sturdy sheet steel construction. This is a scraper belt conveyor. Drop-in width: F1= 480mm; Drop-in length: 750mm Ejection: height H = 3200mm Infeed (underfeed to the machine): height = 300mm + superstruc...

2004 DGS SYSTEM GMBH KBF 325

• Manufacturer: DGS SYSTEM GMBH
• Power requirement: 0.37 kilowatt

Scraper belt conveyor combined with cooling water system and torque shut-off Discharge length D=280mm Chip infeed width F=325mm Insertion height B=approx. 160mm Insertion height B+I=220mm Chip infeed width F1=300...

2007 Sermeto 01

• Manufacturer: Sermeto
• Power requirement: 2.8 kilowatt

Slat-band conveyor very good, little used condition. Cooling water tank 1300 x 2050 x 260mm discharge length D=500mm Total chip intake length approx. AX= 4120mm with sheet metal tray with rubber coating, width 23...

2013 DGS SSF650P50

• Manufacturer: DGS
• Power requirement: 3.5 kilowatt

Slat-band chain conveyor With coolant tank incl. pump output 250 l/min. sufficient for a conveying height of 25m. Very good little used condition. Chip intake length Ax= 3000mm (attachment with sheet metal tray w...

2013 DGS SSF650P50

• Manufacturer: DGS
• Power requirement: 3.5 kilowatt

hinged type chip conveyor, as good as new With coolant tank incl. pump (submersible centrifugal pump) Delivery rate 250 l/min. = sufficient for a conveying height of 25m Chip insertion length (A) 3000mm (attachme...

Mayfran P0003M8060.01

• Manufacturer: Mayfran
• Power requirement: 2.5 kilowatt

Belt conveyor hinged type This chip conveyor can be repositioned using the 3x swivel wheels. It is fixed to the floor with the 4x adjusting screws. Chip inlet: open (not covered) L: 880 x W: 500mm; total inlet ap...

2007 BLECHTECHNIK MC 326 Plus

• Manufacturer: BLECHTECHNIK

Type of control: conventional | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 3 | Length in total: mm | Band width: mm | Voltage: 50/60 V / Hz | Total power requirement: kW | Weight of t...

SFB FÖRDERTECHNIK Conveyor belt

• Manufacturer: Taucha Fördertechnik

Conveyor belt, conveyor belt SFB FÖRDERTECHNIK GmbH Gear motor: SEW WF10DT56L4 0,12 kW 40 rpm 220 - 240 /380 - 415 V 3AC 50 Hz 60 Hz - Operation is possible ! IP54 transmission ratio chain drive: approx. 1 : 0,9 ...