Used processing in New Jersey, USA

AMERICAN PROCESS SYSTEMS

• Manufacturer: AMERICAN PROCESS SYSTEMS

used American Process Systems Bag Dump Station model NFBD. Stainless Steel construction. dump area is 42" W x 33" deep. 4" bottom outlet. (2) 6" top openings. Overall approx. 8' ht. x 40" deep x 53" wide. Fitting...

Screw Conveyor 228.6 mm (9 in) Stainless Steel 304 - IPP# 246774

• Manufacturer: Continental

Additional Info:

Stainless Steel 304 Acrison BDF 4 1-1/2 Screw Feeder - IPP# 203089

• Manufacturer: Acrison

twin screw feed with screw conveyor. Feed bin is 48" x 48" with twin screws discharging into a 10" diameter X 8' long screw conveyor. Leason 3/4HP motors and reducers, conveyor driven by approximately 10 HP motor...

Screw Conveyor 254 mm (10 in) Stainless Steel - IPP# 706440

paddle type screw conveyor, s/steel trough 12" wide x 12" deep x 13'10" long, s/steel screw driven by an electric motor via a gearbox, no top cover on trough, 12" x 12" discharge

Screw Conveyor 533.4 mm (21 in) Stainless Steel 304 - IPP# 230357

• Manufacturer: Nord Gear Corp

Inclined cooling screw conveyor

Screw Conveyor 228.6 mm (9 in) Stainless Steel 304 - IPP# 210686

• Manufacturer: Martin Sprocket

super screw Conveyor Type #2 3/16" wall 3.5" diameter shaft Capacity is 18 M Dry Size is 9" x 2" x 13' 4"

Screw Conveyor Stainless Steel 304 - IPP# 74796

• Manufacturer: Link Belt

screw conveyor. 12" x 16" charge port, 12" x 16" rectangular discharge port. 13" pitch on screw. Packing gland on 304SS shaft and 304SS screw. No drive and no covers (lids).

Screw Conveyor 355.6 mm (14 in) Stainless Steel 316 - IPP# 246782

• Manufacturer: Continental

"V" trough

Screw Conveyor 508 mm (20 in) Stainless Steel 316 - IPP# 246755

• Manufacturer: Thomas & Muller

Additional Info:

Stainless Steel 304 Screw Conveyor - IPP# 96323

screw pitch 9". Trough inside 13'4" x 10" Has packing glands. W/outboard bearings. Openings: top 10" x 10"; discharge btm 1-8".

Carbon Steel Screw Conveyor - IPP# 239464

recycle conveyor for a porcupine dryer 12' long x 24" high x 40" wide.

Screw Conveyor 900 mm (35.4 in) Stainless Steel 321 - IPP# 705929

900mm wide x 6.6m long x 640mm deep, 'u' trough design, wtih 300mm pitch 321 s/steel screw, direct driven by SEW Eurodrive, type K97DV-160M4, mounted on carbon steel legs.

Screw Conveyor 254 mm (10 in) Stainless Steel 304 - IPP# 246807

• Manufacturer: Continental

Angle Mount 16 degree.

Screw Conveyor 254 mm (10 in) Stainless Steel 304 - IPP# 246775

• Manufacturer: Continental

Additional Info:

Screw Conveyor by Thomas & Muller 14.75 Diameter Cooling Screw Stainless Steel 304 - IPP# 246772

• Manufacturer: Muller

Rated 2000 lbs./Hr. at 40 lbs./Cu.Ft. Two-(2) 5' 9 &3/8 cooling sections.