Used processing

New Stock Letina 528 Gallon / 2000L Jacketed Square Storage Tote Tank

Item is a new stock Letina 528 gallon / 2000L jacketed square stackable storage tote tank with the following specifications - — volume approx. 2000 lit — coat dimensions 750 x 1350, height 2000 mm — total height ...

NS Thomsen 2hp pump

New stock - 2 hp Thomsen stainless steel #5 pump assembly with 1-1/2 in/out TC fittings, 3450 rpm washdown motor. 208/230 3 phase electrics, mounted to stainless steel cart with wheels. (Single phase, 2 HP motor ...

SWF Bliss Case Sealer

• Manufacturer: Bliss

Used SWF model 2D2, 'Bliss Style', hot melt, case sealer. The machine was manufactured in 1995. It is equipped with SWF glue system. Machine was fully operational when removed from service (previous owner discont...

RA Pearson Partition Inserter

• Manufacturer: Pearson

Used R.A. Pearson, model Y1904 Partition Inserter. The machine was manufactured in 1981. It was operating at approximately 40 CPM and was previously utilized in a blow molding application. Electrics are 230-460/3...

G & H 20HP S/S Pump

condition: Very Good Item is a used G & H, 20 HP, sanitary, centrifugal pump. It has 4" X 3" Tri-clamp connections. Motor is Baldor, 20 HP, 3450 RPM, wash down - 230/460/60 hz. Motor/pump are mounted to a S/S base.

MRM Rotary Filler

Used MRM, 12 valve, rotary, vacuum filler. The machine was recently rebuilt and a new feedscrew drive (Morrison Timing Screw Co.) and vacuum system was added to the machine. The machine is set up for right to lef...

Horix Rotary Filler

Used Horix, model HA-20 Hytamatic filler. The machine was manufactured in 1980. This is a pressure filler utilizing a level sensing, no contact valve for highly accurate fills. Valve operation is pneumatic. Machi...

Used HGM 25 bbl/775 Gal Jacketed brite tank with mixer

• Manufacturer: HGM

Item is a used 775 Gal / 25 bbl jacketed brite tank originally built in 2019 by HGM. THe tank is set up with a a top mount mixer drive with shaft and (2) blades. The tank has a top manway door and two additional ...

Bemis Case Taper

• Manufacturer: Bemis

Item is a used, Bemis, automatic case taper. This is a Packomatic, Series 1130. It is a top only taper and is approximately 8 feet long. This machine was recently removed from serviced in a beverage packaging fac...

Federal Filler 26/6

• Manufacturer: Federal

Item is a used, Federal S/S, 26 valve filler set up with a 6 head, preessure pad capper. The machine is equipped with 1 1/8 inch spring style valves (not diaphragm) for hot or cold fill application. The machine w...

Cornell Pump

• Manufacturer: Cornell

Item is a used, Cornell, centrifugal pump having 3" X 3" flanged ports. It is powered with a 5 HP Baldor motor, 1750 RPM, 230/460 volt-3 phase. Pump is cart mounted. The pump is cast iron and was utilized in a di...

Inoxpa Flexible Impeller pump

• Manufacturer: Inoxpa

Item is a previously owned, 3" flexible impeller pump. The pump was only run tested with water (otherwise unused). The pump is an Inoxpa pump model RF 50/80 (tag indicates A Line pump). It has 3" ports and is cur...

Used Moyno Wine Pump

• Manufacturer: Moyno

Item is a used Myno, progressive cavity, wine pump. Motor is 2 HP Reliance with very slow speed gear box and Reeves drive. The pump has 2" ports and the Type is SSQ and the frame is 1FF6. The pump and drive are m...

MARQ Case Sealer

• Manufacturer: Marq

Item is a used, MARQ Machinery, hot melt, case sealer. This is a high capacity machine capable of up to 30 CPM. It is equipped with a Nordson model 3700 hot melt glue system. Machine is equipped with central lubr...

Krones Campac Case Packer

• Manufacturer: Krones

Item is a used Krones Campac case packer with (4) Krones PLC cabinets. Manufactured 1995. Change parts to include 12 oz long neck, 12 oz. stubby, 16 oz. and 22 oz. Max motor amps = 4.3 - Full load amps 55.0 460/3...