Used processing in Ontario, Canada

Trusted Seller
A150 Processing
The A80 and A150 models are kneading machines for small volume productions in which good blending and good kneading are essential to obtain a high quality end product. High quality fabrication totally made in sta...
Mississauga, Canada
Trusted Seller
A80 Processing
Machine adapted to international safety and hygienic rules. Practically maintenance free. The A80 and A150 models are kneading machines for small volume productions in which good blending and good kneading are es...
Mississauga, Canada
Trusted Seller
A&M Process SRB150T
- Manufacturer: A&M Process
316 stainless steel. The mixer is 36" wide x 30" long x 36" deep. Approximately 15 cubic foot working capacity. The lid lifts up and down with an air cylinder on the back. It has a 2.5" outside diameter sani clam...
Barrie, Canada
Trusted Seller
Used American Process Systems 4 Cu Ft Double Ribbon Blender, Model DRB-4
- Manufacturer: Americal Process Systems
1 Used American Process Systems 4 Cu Ft Double Ribbon Blender, Model DRB-4. The blender is all stainless steel construction and was built in 1994. The heavy duty frame is steel and painted in “steel – it”. Blende...
Toronto, Canada
Trusted Seller
Used Zanchetta 10 Litre Full Containment High Shear Mixer
- Manufacturer: Zanchetta
- Model: Roto
1 Used Zanchetta 10 Litre Full Containment High Shear Mixer, Model Roto P-10. This is a "one-step" high shear, high speed processor to mix dry powders, to granulate by liquid binder, to dry by heat and vacuum. Eq...
Toronto, Canada
Ribbon blender
25 Hp, Weg 575 V, 23.9 AMPS, 1775 RPM, 40" hight x 37" width x 96" length 304 SS cubic yards: 2.62 yd3 cubic feet: 70.97 ft3 cubic meter: 2m3
$34,791 USD
Get financing
Est. $655/mo
Brant, Canada
Ribbon blender
43" height x 38" with 75" length 304 SS cubic meters: 1.76 m3 cubic feet: 62.21ft3 cubic yards 2.3yd3
$43,489 USD
Get financing
Est. $818/mo
Brant, Canada
Pneumatic tank cleaner from spraying systems
Shipping dimensions: Height - 52" x Width - 9" x Length - 9" (1 of 4) CO model AA 190
$652 USD
Brant, Canada
Twin-Paddle Blender
- Manufacturer: Aitken
-CG (2017) Twin-paddle blender with 84"x52" tub height: 24" -Hopper dims: Length: 84" -Width: 52" -Height: 34" -DIA Paddles, (2) 10" x22" -Pneumatic actuated horizontal discharge ports -Rice lake load cells, -Ai...
$20,295 USD
Get financing
Est. $382/mo
Brant, Canada
Pneumatic Lightnin mixer
- Manufacturer: Lightnin
Characteristics: Industrial Process + Tanks, Sanitary Process Equipment, Water Treatment, Stainless Steel, Used | Price (cdn$): $1,200.00
$870 USD
Brant, Canada
Lightnin Pneumatic Clamp on Mixer
- Manufacturer: Lightnin
-Model # NAG-100 -Greey mixing equipment -Serial number: 771155X
$594 USD
Brant, Canada
Lightnin Pneumatic Clamp on Agitator
- Manufacturer: Lightnin
-Model # NAG-100 -Greey mixing equipment -Serial number: 771617X
$594 USD
Brant, Canada
Braun Clamp On Mixer- 1/3 HP
- Manufacturer: Braun
-Manufacturer: Braun Mixer Inc -Model: SG33TC -Serial number: 96097303 -Takes a 0.625" shaft diameter -Reliance Motor: -HP: 1/3 -RPM: 1725 -Volts: 208-230/ 460-480 -Hz: 60 -Phase 3
Brant, Canada
IPTS Clamp-On Agitator
-Comes with Genesis AC motor speed control hybrid drive -Shaft diameter: 1" -Manufacturer: IPTS Inc -Model: RPO 1-Ratio: 5:1 -HP: 1.05 -Baldor Reliance Motor: HP: 0.33 -Volts: 230/460 -Amps: 1.6/ 0.8 -RPM: 1725 -...
Brant, Canada
Neptune Side Mount Mixer
-0.750" shaft dia needed -Manufacturer: Neptune Mixer Co. -Model: JG-3.1 -Serial number: 117139 -RPM: 350 -Motor: Model: 60443, HP: 0.5, Volt: 575, Phase 3
$623 USD
Brant, Canada