Used processing in New Jersey, USA

ROSS PVM-100 Triple Motion Stainless Steel Mixer

• Manufacturer: Ross

Used Ross Model PVM-100 Triple Motion Stainless Steel Mixer. Mixing capacity 100 gallon. Stainless steel jacketed change can. Vacuum mixer. Triple mixers including (1) three wing anchor agitator with scrapers ...

COWLES DISSOLVER CO, INC 510VHV

• Manufacturer: Cowles
• Model: 510 VHV

used Cowles Dissolver Model 510VHV Post Mixer. Stainless Steel shaft. 10 HP, 220/440 volt.

10 HP Tote/Drum Mixer with pneumatic stand to raise and lower

used 10 HP Tote/Drum Mixer with pneumatic stand to raise and lower. Motor is 10 HP, 230/460 volt, 1160 rpm. Stainless Steel Mixing shaft is 25.5" and 45" blade to the motor. From mixing blade to top of motor is ...

Clamp-On Air Mixer

Used Clamp-On Air Mixer. 54" overall length. 39" L x 3/4" dia. stainless steel shaft. no blades. Pneumatic mixer.

Clamp-On Air Mixer

Used Clamp-On Air Mixer. 41" overall length. 29" L shaft with (2) 316 stainless steel prop type blades that are approx. 5" diameter. Pneumatic mixer.

clamp-on stainless steel mixer/variable speed agitator

Used clamp-on stainless steel mixer / variable speed agitator with digital readout. Driven by 1/2 HP, 1725 RPM, 115 Volt, single phase motor. Has a 30" lgth. shaft with collapsible agitator blades (approx. 8" i...

KOCH-GLITSCH

• Manufacturer: Koch

2" KOCH-GLITSCH STATIC MIXER, TYPE SMX, S/S, 3 MIXING ELEMENTS, 2" FLANGE, JOB# G 27581-72.

LIGHTNIN X6Q150

• Manufacturer: Lightnin

used 1.5 HP Lightnin Mixer/Agitator Model X6Q150. 208-230/460 volt. Has bracket to mount on angle or remove to mount vertical. No shaft available.

MIXMORE HV-2

• Manufacturer: MIXMORE

(2) Side entering Mixmor Mixers Model HV-2. 2 HP, 208-230/460 volt, 1755 rpm motors. 10" Diameter Carbon steel Flanges. Shafts are approx. 2' lgth. with 16" Dia. Props. Units appear unused.

LESSON

• Manufacturer: LESSON

Used 2 HP Clamp-On Mixer. Has Lesson 2 HP, 230/460 1740 RPM/ 2 HP, 200/400, 1420 RPM motor. Stainless Steel shaft ~3'6" lgth. with 6" dia. prop.

Clamp-on Agitator 1/2 HP

• Manufacturer: FHP

used Clamp-on Agitator. 1/2 HP, 1ph, 115 volt. Motor built by FHP Ind. approx. 1/2" dia x 30" L carbon steel shaft with (2) collapsible blades(5.75" diameter). Approx. 39" OAL.

CHEMINEER PD-2

• Manufacturer: Chemineer
• Model: PD-2

Chemineer Clamp-on Agitator. 1/3 HP, 1725 RPM, 208-230/460 volt motor. Mdl. PD-2. 44" Stainless steel shaft.

LIGHTNIN NC-4

• Manufacturer: Lightnin
• Model: NC-4

Lightnin 0.25 HP Clamp-On mixer. Model NC-4. 208-220/440 volt. 1725/1425 RPM motor. Explosion Proof drive (XP)

LIGHTNIN

• Manufacturer: Lightnin

Used 1 HP Lightnin mixer/agitator. Motor is explosion proof (XP), 1 HP, 230/460 v, 1760 RPM motor. Flange mount type. Has approx. 3'L Carbon Steel shaft.

LIGHTNIN XJA-100

• Manufacturer: Lightnin
• Model: XJA-100

Used 1.17 HP Lightnin Clamp-On Mixer. Model XJA-100. Has 1.17 HP, 200-230/460 volt, 1725 RPM motor. Stainless Steel shaft 0.75" dia x ~39" lgth. with (2) 4.5" dia. props.