Used rollers

RMS Single Roll Roller Die
- Manufacturer: RMS
One (1) used RMS roller die head, 6” ID inlet mating with extruder, 23” roll face, approximately 20” usable surface, 12” diameter roll, used to produce tire tyre tread
Cleveland, OH
NEW Kobelco New KSBI TSR-600 Twin Screw Roller Head Extruder
- Manufacturer: Kobelco
One (1) NEW KSBI Kobelco TSR-600 Twin Screw Roller Head Extruder, YOM 2025, Specialized twin screw extruder with an inclined roller-head, Capacity of Asset: Output (kg/hr) : 26000; - Extruder: Hopper Opening (mm ...
Cleveland, OH
Trusted Seller
SEBRIGHT PRODUCTS BRIGHT TECHNOLOGIES MODEL 4030XS-1-7-SS HIGH DENSITY DEWATERING COMPACTOR EXTRUDER MANUFACTURED 2019
- Manufacturer: SEABRIGHT PRODUCTS, INC.
BRIGHT TECHNOLOGIES MODEL 4030XS-1-7-SS HIGH DENSITY DEWATERING COMPACTOR EXTRUDER MANUFACTURED 2019 S/N E18 08 11958 High Density Extrudes were originally designed to dewater wet rejects for pulp and paper ap...
Wisconsin, USA
Farrel 10" Hot Feed Rubber Extruder
- Manufacturer: Farrel
One (1) Used 10" Farrel Hot Feed Rubber Extruder, roller feed, Motor 200 HP, 500 volt, 1750 rpm.
Cleveland, OH
Trusted Seller
Entex Planetary Roller Extruder, Model TP-WE 150/600-M1, 75KW, New in 2014
- Manufacturer: Entex
Entex Planetary Roller Extruder, Model TP-WE 150/600-M1, 75KW, New in 2014 Allen Bradley Panelview Plus 1500 Touchscreen Control Panel 480/3/60 Two Station Feed System with Schenck Process Feeders, Model MechaTro...
United States
Trusted Seller
2007 UMANG PHARMATECH UDRE-65(E)
- Manufacturer: UMANG PHARMATECH
Used Umang Pharmatech Stainless Steel Die Roller Extruder Model: UDRE-65(E) Year: 2007 1.2mm die and ammeter, iris valve with table 6" - manually operated 5 liter 316 stainless steel hopper
Hainesport, NJ
Trusted Seller
Hosokawa Bepex Extruder DP200800
- Manufacturer: Bepex
Hosokawa / Bepex / Hutt, Model DP 200-800, automatic, rotary bar roller press with pounds of product per hour – depending on materials, application and machine configuration. Equipped with a 30" long x 5" wide x...
Carol Stream, IL
Trusted Seller
Hosokawa Bepex Extruder FP200AA
- Manufacturer: Bepex
Hosokawa / Bepex / Hutt, Model FP 200 AA, automatic, rotary bar roller press with pounds of product per hour – depending on materials, application and machine configuration. Equipped with a 30" long x 5" wide x ...
Carol Stream, IL
RMS Head Single Roll Roller Die
- Manufacturer: RMS
One (1) Used RMS Roller die head, single roll roller die, 6” ID inlet mating with extruder, 23” roll face, approximately 20” usable surface, 12” diameter roll.
Cleveland, OH
Trusted Seller
10" x 84" Conair Cleated Belt Puller, NEW IN 2023
- Manufacturer: Conair
Used 10" x 84" Conair Cleated Belt Puller Drive: Two 3hp closed-loop vector drives for improved speed regulation and an increased 50:1 speed range. NEW IN 2023 TESTED UNDER POWER AT ARLINGTON - SEE VIDEO
United States
Trusted Seller
3.5" Davis Standard Cold Feed Rubber Extruder
- Manufacturer: Davis-Standard
3.5" Davis Standard Cold Feed Rubber Extruder Used 3.5" Davis Standard cold feed rubber extruder, model 35IN35, electrically heated, water cooled barrel, powered roller strip feeder section, Thermatic gearbox, 17...
Cleveland, OH
Trusted Seller
3.5" Davis Standard Cold Feed Rubber Extruder
- Manufacturer: Davis-Standard
3.5" Davis Standard Cold Feed Rubber Extruder Used 3.5" Davis Standard cold feed rubber extruder, model 35IN35, electrically heated, water cooled barrel, powered roller strip feeder section, Thermatic gearbox, 17...
Cleveland, OH
Trusted Seller
USED Tromp Multi-Product Sheeting Line with Chunker and Extruder
- Manufacturer: Tromp
This machine was most recently set up for Cibatta. It also has these capabilities: • Loaf Breads • Hoagies • Square Breads • Diamond Breads • Dinner Rolls More Product Details: • Brand: Tromp • Type: Doug...
Morgantown, WV
Davis Standard Rubber Extruder
- Manufacturer: Davis-Standard
One (1) DS Davis Standard 2.5" 60mm Cold Feed Rubber Extruder, Model 25IN25H, 20:1 L/D, 17.26:1 G/B ratio, Reliance 40 HP 1190 RPM 460 VAC motor, VFD variable frequency drive, control panel, clamp assembly, force...
Cleveland, OH
Davis Standard 2.5" Cold Feed Rubber Extruder
- Manufacturer: Davis-Standard
One (1) DS Davis Standard 2.5" 60mm Cold Feed Rubber Extruder, Model 25IN25, 20:1 L/D, 17.26:1 G/B ratio, Reliance 40 HP 1185 RPM 460 VAC motor, VFD variable frequency drive, control panel, clamp assembly, forced...
Cleveland, OH