Used Processing in Trenčín Region, Slovakia

SEI Laser Italy - SEI GIOTTO CO2 3ax Compact - Laser for industrial marking and engraving primarily of wooden products - 2015

- Beam diameter (across entire area): 500 μm - 3-axis galvo system - Constant beam diameter over full working field - Integrated dual-board DSP controller - 3-axis interpolation motor control - Protection

Demag Concept 250/630-1450 (2006 year)

• Manufacturer: Demag

Clamping force: 250 tons Distance between tie bars: 630 x 630 mm Mold height: 330 x 830 mm Opening stroke: 675 mm Dylight max: 1505 mm Screw diameter: 50 mm Shot volume: 530 cm3 Shot weight: 482 g Injecti...

Arburg 720 S 3200-2100 Servo (360ton), Arburg retrofit

• Manufacturer: Arburg
• Model: 720 S 3200-2100

Producer: Arburg Model: 720 S 3200-2100 Servo Clamping unit 720S Clamping force: 360 ton (increased by Arburg ) Opening path: 700 mm Mold installation height: 300-700 mm Distance between the clamping plates...

Demag Ergotech 200/560-840 concept(year 2002)

• Manufacturer: Demag
• Model: Ergotech

Demag Controll: NC4 Model: Ergotech 200/560-840 concept Year : 2002 Clamping force: 200 ton Tie bar distance: 560x560mm Screw dia: 30mm Hours: 50.000 Core pullers: 1 hydraulic Pneumatic valve: 1 pc Poss...

2000 TEC Conveyor Belt

• Manufacturer: TEC

Conveyor belt TEC Adjustable height: 900-1050 mm Width: 600 mm Lenght: 2500 mm This belt was used for Engel 350 ton machine

2014 MAPRO CONVEYOR BELT 2041x500

• Manufacturer: MAPRO

Conveyor belt MAPRO Adjustable height: 850-1300 mm Lenght: 540 mm Lenght: 2100 mm

RESERVED (2007) Krauss Maffei Bolt on unit SP390, screw 40 mm

• Manufacturer: Krauss-Maffei

Krauss Maffei Bolt on external injection unit Model: SP390BO Year: 2007 Screw: 40mm Injection volume: 204 cm3 Max temperature: 375 degrees Max Pressure: 1860 bar MC4 controll Was used for Krauss Maffei 20...

(2008) Engel Victory 1050/180 Tech

• Manufacturer: Engel
• Model: Victory

Engel Victory 1050/180 Tech CC200 controll Clamping force :180 ton Screw dia: 60 mm Injection volume: 508 cm3 Cores: 1 + 2 Air blow : 1

LOG 160 ton injection molding machine (2016 )

• Manufacturer: Log

Clamping force: 160 ton Shot weight: 298 g Screw diameter: 45 mm (Machine has new screw year 2021) Opening stroke: 430 mm Distance between tie bars: 460x460 mm Mold thickness: 180-500 mm

(New!) Boy original Plastification unit (Screw and barrel) , for Silicon , 32mm

• Manufacturer: Boy

New injection unit for Silicon Screw dia: 32 mm Material : Silicon Condition: new never used (new cost: 20.000€)

Krauss Maffei 300-1000CX (year 2013 ) + Sepro Success 22 robot

• Manufacturer: Krauss-Maffei
• Model: 300-1000CX

- Clamp Force 300 Tonne (3000KN) - Clamp Unit 995 x 1050mm - DBTB 630 x 630mm - Screw Dia 55mm - Shot Weight 476g - MC5 Control - Year 2013 Machine has only 30.000 hours , is from clean medical industry.

RESERVED Krauss Maffei 3200-24500MX (year2014, 3200 ton)

• Manufacturer: Krauss-Maffei

Krauss Maffei KM 3200-24500 MX injection molding machine Year of manufacture - 2014 Number of working hours - 35,775 Plasticizing system SP 24500 A complete plasticizing system with a screw diameter of 175 mm...

Krauss Maffei 2000-17200MX (2007) KraussMaffei LR500 Linear robot

• Manufacturer: Krauss-Maffei

Krauss Maffei 2000-17200MX Clamping force: 2000 ton Distance Between tie bars: 1850x1600mm Clamping plates dimensions: 2650x2400mm mold installation height max/min: 1700x800mm Mold opening stroke: 2800mm To...

Krauss Maffei 420-1900 C2

• Manufacturer: Krauss-Maffei
• Model: 420-1900 C2

Material used: pc, pa, ppc, hp 4x hot runners 2x air valves for needle control Multipikator- device for increasing pressure from 6 to 12 bar

(2012) Engel VICTORY 1050/400 TECH PRO

• Manufacturer: Engel
• Model: Victory

weight: 24.600 kg