Test, Lab, Medical equipment » Network Analyzers » Florida

Building Filters

23

Used operator interface in Florida, USA

Trusted Seller
Anritsu MP1632A
- Manufacturer: Anritsu
- Model: MP1632A
Burst measurement :Generation and measurement of burst signals for optical loop tests Operating frequency :50 MHz to 3.2 GHz (1-kHz steps) Test pattern :PRBS pattern 2n-1(n:7,9,11,15,20,23,31) Consecutive 0s patt...
New Smyrna Beach, FL
Trusted Seller
Keysight / Agilent / HP E8361C
- Manufacturer: Agilent - Keysight
- Model: E8361C
Improved graphical user interface 94dB dynamic range and <0.006 dB trace noise (specified to 67 GHz, with operation to 70 GHz) <26 usec/point measurement speed, 32 channels, 20,001 points TRL/LRM calibration, on...
New Smyrna Beach, FL
Trusted Seller
Keysight / Agilent / HP E8364C
- Manufacturer: Agilent - Keysight
- Model: E8364C
Improved graphical user interface 104 dB dynamic range and <0.006 dB trace noise <26 usec/point measurement speed, 32 channels, 20,001 points TRL/LRM calibration, on-wafer, in-fixture, waveguide, and antenna meas...
New Smyrna Beach, FL
Trusted Seller
Keysight / Agilent / HP E8362C
- Manufacturer: Agilent - Keysight
- Model: E8362C
Improved graphical user interface 123 dB dynamic range and <0.006 dB trace noise <26 usec/point measurement speed, 32 channels, 20,001 points TRL/LRM calibration, on-wafer, in-fixture, waveguide, and antenna meas...
New Smyrna Beach, FL
Trusted Seller
Keysight / Agilent / HP E8363C
- Manufacturer: Agilent - Keysight
- Model: E8363C
Improved graphical user interface 110 dB dynamic range and <0.006 dB trace noise <26 usec/point measurement speed, 32 channels, 20,001 points TRL/LRM calibration, on-wafer, in-fixture, waveguide, and antenna meas...
New Smyrna Beach, FL
Trusted Seller
Acterna 8000
- Manufacturer: JDSU - Viavi - Acterna
- Model: 8000
Datacomm interfaces in one testmodule for ANSI and ETSI standards Native datacomm interfaces for EIA-530, RS-449 (422 and 423), RS-232, X.21, V.35, and V.36 serial interfaces Government standards support for MIL-...
New Smyrna Beach, FL
Trusted Seller
Anritsu MS420K
- Manufacturer: Anritsu
- Model: MS420K
- High frequency limit: 0.03 GHz
10Hz to 30MHz frequency range 0.01Hz frequency resolution 2 channels (R and T) input channels 50ohm impedance Wide measurable level range of over 150dB, allowing the measured device to be checked at actual operat...
New Smyrna Beach, FL
Anritsu MP1632A-01-03
- Manufacturer: Anritsu
- Model: MP1632A
Anritsu MP1632A-01-03 Details Anritsu MP1632A-01-03 Digital Data Analyzer The MP1632A/C Digital Analyzer is a compact lightweight analyzer combining a transmitter and receiver for performing error detection of hi...
Lake Mary, FL
Anritsu MD6430A
- Manufacturer: Anritsu
- Model: MD6430A
Anritsu MD6430A Details Anritsu MD6430A Network Data Analyzer The MD6430A Network Data Analyzer can measure errors on 13 different interfaces for leased lines (64 kbit/s to 6.3 Mbit/s), ISDN (BRI, PRI), and V/X s...
Lake Mary, FL
Anritsu MD6430A-01-02-MU643000A
- Manufacturer: Anritsu
- Model: MD6430A
Anritsu MD6430A-01-02-MU643000A Details Anritsu MD6430A-01-02-MU643000A The MD6430A Network Data Analyzer can measure errors on 13 different interfaces for leased lines (64 kbit/s to 6.3 Mbit/s), ISDN (BRI, PRI),...
Lake Mary, FL
Keysight-Agilent 4937A
- Manufacturer: Agilent - Keysight
- Model: 4937A
Keysight-Agilent 4937A Details Keysight-Agilent 4937A The Agilent-HP 4937A contains a set of voiceband transmission tests -- level/frequency measurement, noise, and 2- and 4-wire return loss measurements. It also...
Lake Mary, FL
Anritsu ME7838A
- Manufacturer: Anritsu
- Model: ME7838
Anritsu ME7838A Details Anritsu ME7838A Broadband VNA This ME7838A broadband VNA provides single sweep coverage from 70 kHz to 110 GHz and is operational from 40 kHz to 125 GHz. It consists of the following items...
Lake Mary, FL
Willtek 4107S
- Manufacturer: Willtek
Willtek 4107S Details Willtek 4107S Mobile Fault Finder (Also sold as Wavetek 4107S)- Increase Efficiency of Point-of-Return Testing Up to half of the mobile phones returned for problems are not really defective ...
Lake Mary, FL
Keysight-Agilent 8505A-001
- Manufacturer: Agilent - Keysight
- Model: 8505A
Keysight-Agilent 8505A-001 Details Keysight-Agilent 8505A-001 The 8505A is a high performance RF Network Analyzer operating from 500 kHz to 1.3 GHz. It accurately measures complex impedance, transfer functions, a...
Lake Mary, FL
Anritsu MP1632C
- Manufacturer: Anritsu
- Model: MP1632
Anritsu MP1632C Details Anritsu MP1632C Digital Data Analyzer - 3Gbps BER Tester The MP1632 provides a One Box BER Tester up to 3.2GHz. Anritsu MP1632C Features: * PPG and ED for 50MHz to STM-16 Applications * Hi...
Lake Mary, FL

12

Overview

Network analyzers are essential tools used to measure the performance and integrity of electrical networks. They help in analyzing parameters such as impedance, gain, and phase, which are critical for ensuring optimal operation in communications and electronic systems. These devices are widely used in research, development, and maintenance of RF and microwave circuits.

FAQ

What should I look for when buying a used network analyzer?

Check the frequency range, calibration status, overall condition, and ensure that all necessary accessories and software are included. Verify the unit’s performance through a thorough inspection or test.

How do I arrange safe shipping for a network analyzer?

Use a professional shipping service that specializes in delicate electronic equipment. Ensure the analyzer is well-packed with cushioning materials and secured inside a sturdy box.

What regular maintenance does a network analyzer need?

Routine maintenance includes regular calibration, software updates, and cleaning of connectors and ports. Always refer to the manufacturer’s guidelines for specific maintenance requirements.