Used Heat Exchangers in New Jersey, USA

UX-216-UJ-20

Used 65 Sq.Ft., 316-SS plate heat exchanger. MFD by Tranter type UX-216-UJ-20, Serial # P23160H. Rated 150/150 psi @ 300 deg. F. Each end plate has 3-2" nozzles. Mounted on frame.

AO SMITH

• Manufacturer: A.O. Smith

892 Sq.ft. Shell and Tube heat exchanger.(316) 5/8" OD x 17'4" Tubes. U Tube. High pressure. Tube and shell both rated 2000 PSI @ 650 degF.

RUBICON

• Manufacturer: RUBICON

Unused 38.3 Sq. Ft. Rubicon Shell and Tube Heat Exchanger. CS Shell rated 125 PSI @ 300 Deg.F. 304L Tubes rated 655 PSI @ 300 Deg.F. Dimensions 6"Dia x 144"L. Serial #4136. National Board #2887. Built 2015.

Shell and Tube Heat Exchanger 14.3 m² (154.3 ft²) Graphite - IPP# 85108

• Manufacturer: Lurgi

cylindrical shell and tube heat exchanger overall length 1900mm

WORSHAM

• Manufacturer: WORSHAM

Qty (4) Each used 3917 sq.ft. Shell and Tube Heat Exchangers. Carbon Steel Shell Rated 300 PSI @ 532 deg.F. (1147) 3/4 x 18' Carbon Steel tubes rated 300 PSI @ 532 Deg.F.. Type BEM.

AERCO INTERNATIONAL INC SW1A03

• Manufacturer: International

Qty. (3) each: 15 Sq.Ft. HELITHERM steam to water heat exchanger. Steam is primary or tube side fluid and Water is secondary or shell side fluid. Shell is 10.5" dia x 34.75" L. Has 3 coils.

Stainless Steel 316 Janus Neill Engineering ltd Shell and Tube Heat Exchanger - IPP# 215086

• Manufacturer: Janus Neill Engineering ltd

horizontal (sloped) heat exchanger contract # M2/98/U001/1544 12- 316 stainless steel internal baffles

GRAHAM

• Manufacturer: Graham

Qty. (4) Each: 12 Sq.ft. Stainless Steel Shell & Tube heat exchanger. Shell is 6" diameter. Has (4) U-tubes (8 holes), 1" OD x 6' L. Carbon Steel head. Unit with NB# 6912, shell re-rated to 100/FV @ 450 degF....

Spiral Heat Exchanger 8 m² (86.1 ft²) Stainless Steel 316 - IPP# 706516

• Manufacturer: Rosenblad

vertical spiral heat exchanger side A with pressure rating 6.5 kg/cm2, side B 5 kg/cm2

KRUEGER,SHE

• Manufacturer: Krueger

Qty (2) each: 1000 Sq.Ft. Used shell and tube heat exchanger. (319) 3/4" x 15'6" SA-179/SB 111 COPPER AND COPPER ALLOY tubes. AES, AEU. Rated 100 PSI @ 400 degF on both shell and tube sides.

Shell and Tube Heat Exchanger 17 m² (183 ft²) Stainless Steel Austenitic - IPP# 219535

• Manufacturer: GESSNER

horizontal or vertical heat exchanger Tube side: Multi-pass (total volume 113 Liter) (total volume 216 Liter) (2) 316Ti (1.4571) stainless steel dished heads

Shell and Tube Heat Exchanger 6.5 m² (70 ft²) Stainless Steel - IPP# 222964

• Manufacturer: IGEFA Siegen/Germany

Type: Tube and shell horizontal heat exchanger pressure tube side: 62bar @ 0/200 degrees C (volume 30 liter), pressure shell side: 13bar @ 0/200 degrees C (volume 67 liter), bolt bonnet flat head, CE stamped

Shell and Tube Heat Exchanger 147 m² (1,582 ft²) Stainless Steel Austenitic - IPP# 214098

• Manufacturer: Kosik

vertical or horizontal heat exchanger pressure tube side: -1/6 bar @ 200 deg C, shell -1/6 bar @ 200 deg C domed head, (1) dished head

Shell and Tube Heat Exchanger 153 m² (1,647 ft²) Stainless Steel 316 - IPP# 219500

• Manufacturer: K.Ley

high pressure heat exchanger, Capacity (tubeside): 1060 liters Capacity (shell side): 1535 liters 2-pass Shell thickness: 12mm thick Expansion joint: Yes, in the middle of the shell (2) 316Ti (1.4571) stainless s...

Plate and Frame Heat Exchanger 20.6 m² (221.7 ft²) Titanium - IPP# 222343

• Manufacturer: Thermowave Gmbh

plate heat exchanger, (wash column heater), pressure both sides -1/6 bar @ -20/100 degrees C (37.8 & 37.8 liter) 68.470kw, carbon steel pressure plates and frame.