Used Heat Exchangers in New Jersey, USA

Hastelloy - B Clad Cosmos Minerals AEL Shell and Tube Heat Exchanger - IPP# 225578

• Manufacturer: Cosmos Minerals

15.25" diameter x 1.5" thick. (2) Hastelloy B heads. Alloy 600 expansion joint n the shell.

Stainless Steel 316 Mechanica Sarda BEM Shell and Tube Heat Exchanger - IPP# 222677

• Manufacturer: Meccanica Sarda

pressure tube side 18 bar/full vacuum @ 130 degrees C , 945 liter; shell rated 12 bar @ 130 degrees C, 895 liter. 316LSS clad Tube sheets Baffles: 7, made of 304SS, in the shell (2) bolted heads; (1) 316L stainle...

Shell and Tube Heat Exchanger 25 m² (269.1 ft²) Graphite - IPP# 204138

• Manufacturer: VICARB

condenser pressure shell side rated -1/10 bar @ -25/200 degrees C (volume 350 liter), pressure tube side rated -1/5 bar @ -28/200 degrees C (volume 204 liter),

Shell and Tube Heat Exchanger 11.4 m² (123 ft²) Tantalum - IPP# 222570

• Manufacturer: Pfaudler

(48) 1" OD welded tubes. (2) Glass lined heads.

Stainless Steel Mach Fabr Korpershoek BV Shell and Tube Heat Exchanger - IPP# 221508

• Manufacturer: Mach Fabr Korpershoek BV

Expansion joint: Incolly 825 (2) carbon steel flat channel heads

Spiral Heat Exchanger 0.7 m² (7.5 ft²) Glasslined - IPP# 229093

• Manufacturer: QVF CORNING

1060 mm total lengtht

Spiral Heat Exchanger 16 m² (172.2 ft²) Stainless Steel - IPP# 211566

condensor shell is approximately 1.3m3 with welded dished top and bottom

Shell and Tube Heat Exchanger 2 m² (21.5 ft²) Graphite - IPP# 703780

• Manufacturer: Le-Carbone Lorraine

Additional Info:

Stainless Steel 304 Baeuerle and Morris Inc Shell and Tube Heat Exchanger - IPP# 216271

• Manufacturer: MB Bäuerle

Bimetallic SB111CDA706 (85% CU) over 304 SS tubes

Shell and Tube Heat Exchanger 124 m² (1,335 ft²) Copper/Brass - IPP# 207571

• Manufacturer: API Ketema

Size 25-C-72 with CS tubes sheet 1 1/2" thick (2) CS heads

Shell and Tube Heat Exchanger 4 m² (43.1 ft²) Graphite - IPP# 208481

• Manufacturer: GAB Neuman

4.0/2,8 Sqm

Shell and Tube Heat Exchanger 183 m² (1,970 ft²) Stainless Steel - IPP# 219803

• Manufacturer: K. LEY Germany

(1) Duplex stainless steel (1.4462) hemispherical head, (1) duplex stainless steel (1.4462) dished head pressure tube side: -1/6 bar @ 250 deg C (815 liter), shell side: -1/6 bar @ 250deg C (1560 liter)

Shell and Tube Heat Exchanger 4 m² (43.1 ft²) Graphite - IPP# 211590

• Manufacturer: VICARB

falling film condenser With weirs on top of tubes rated 6 bar @ 200 degrees C Service Side; 6 bar @ 200 degrees C process side.

Shell and Tube Heat Exchanger 4 m² (43.1 ft²) Graphite - IPP# 211599

• Manufacturer: VICARB

Tube dimensions: (24) 20 mm x 32mm OD x 2940 mm long

Shell and Tube Heat Exchanger 22 m² (236.8 ft²) Graphite - IPP# 211576

• Manufacturer: SGL TECHNIK GmbH

Shell volume: 370 liter Tube volume: 115 liter