Used Coil Handling

1000mm CoilTech CMFL UL80 1000 10

• Manufacturer: CoilTech

In-Stock (Detroit, MI.) Max coil width: 1000mm (39.37") | Max material thickness: 3.2mm (.125") @ 1000mm (39.37") / 6mm (.236") @ 500mm (9.8") | Max coil weight: 10 tons (20,000 lbs)

Iowa Precision Coil Line

• Manufacturer: Iowa Precision

Used Iowa Precision Full Duct-O-Matic Coil Line Year – 1999 New Iowa Precision Controls 2014 Installed 6-Uncoilers Duct-O-matic Section Level, Bead, Notch (Slip/Drive/Transverse Duct Connector) Tie Rod Hole Punch...

12" Littell Straightener and Uncoiler with New CoilTech feeder

• Manufacturer: CoilTech

Max width: 12" | Stock capacity thickness: .125" @ 12" | Max coil weight: 10,000lbs. | Max coil o.d.: 60" | Equipped with: 7 Roll Starightener ,Entry and Exit Pinch Rolls, Coil Hold Down Arm, Threading Table, Jo...

1000mm CoilTech Complete Servo Feedline - SpaceSaver (NEW)

• Manufacturer: CoilTech

Max coil width: 1000mm (39.37") | Max material thickness: 3.2mm (.125") @ max width | Max coil weight: 12 tons (22,000 lbs)

800mm CoilTech Complete Servo Feedline (NEW)

• Manufacturer: CoilTech

Max coil width: 800mm (31.50") | Max material thickness: 3.3mm (.130") @ max width | Max coil weight: 5 tons (10,000 lbs)

1300mm CoilTech Complete Servo Feedline (NEW)

• Manufacturer: CoilTech

- 9 Roll Straightener - Auto Job Set Up - Servo Motor Controlled Lateral Drum Guides - External Encoder

24" Dallas Servo Feeder Straightener Combo

• Manufacturer: Dallas

Note: Uncoiler Not Available Maximum coil width: 24" | Coil thickness: .160"x 24" / .250"x6" | Equipped with: Servo Feeder Pull-Thru Straightener Combo, Cabinet base mounted with adjustable pass line, Adjustable ...

JACO JDRE-2016 DC

• Manufacturer: Jaco

2,000 LB. JACO MOTORIZED DOUBLE-END UNCOILER WITH SWIVEL BASE MISSING A SET OF ARMS ON/OFF AND VARIABLE SPEED CONTROLS (2) 1 H.P. MOTORS AC IN 220 OR 440 VOLT WIRED 440/3/60 LATE MODEL SOLID STATE POWER SUPPLY IN...

2001 Complete Engel Coil Line

• Manufacturer: Engel

Product Description This machine would be an amazing addition to any HVAC duct shop! 4 Decoilers Beader Notcher Shear Pittsburgh Snaplock Drive Bender Duplex Lin-O-Matic Insulation Durodyne Pin Spotter Wrap Brake...

1999 Iowa Precision Coil Line

• Manufacturer: Iowa Precision

Product Description Available December 1st, 2015 Model DCT 6016-2 – DUCT-O-MATIC II Serial #709908 5 foot 16 GA Capacity 230 Volt 3 Phase Electrics) Six (6) Powered 12,000 LB 60” capacity Un-Coilers included Mach...

2005 Complete Engel Coil Line

• Manufacturer: Engel

Upgrade your HVAC duct shop with this awesome setup! 2005 Engel Industries M-516-H D-LU Coil Line 5′ Wide 4 Decoilers Beader Notcher 16 Ga. Shear Pittsburgh Snaplock Cleat Roller Duplex Lin-O-Matic Insulation (ne...

2005 Complete Engel Coil Line

• Manufacturer: Engel

Product Description Upgrade your HVAC duct shop with this awesome setup! 2005 Engel Industries M-516-H D-LU Coil Line 5′ Wide 4 Decoilers Beader Notcher 16 Ga. Shear Pittsburgh Snaplock Cleat Roller Duplex Lin-O-...

2013 PROFAB Plasma Coil Feeder

STANDARD FEATURES INCLUDE: Five Roll Straightener Fabricated Steel Mounting Cabinet Roll Setting Scales 110 V at Controls Machined Side Plates Hardened and Ground Rolls Re-lube Type Bearings 32 Inch Pass-line Hei...

BECKWOOD Coil handling

• Manufacturer: Beckwood

BECKWOOD (USED) 200 TON FEED LEASE/PA/BECKWOOD BLANKING LINE 40" X 60" BED 8" STROKE 9.5" SHUT HEIGHT 34" BED HEIGHT 200 TONS 3" X 40" X 60" BOLSTER BED T SLOTTED BED AND RAM FEATURES - FEED LEASE DOUBLE END UNCO...