Used Processing in Sweden

Stand 80x61cm

• Manufacturer: anders brolin ab

Jarvis Buster 5

• Manufacturer: Jarvis
• Model: BUSTER 5

Offered with or without control cabinet and transformer. Replace front bearing Replace p-box motor Most electricity replaced Refurbished tensioner

Lid for sideboard trolley 200 liters -electrolyte treated

Dimensions: 690 x 690 x 20 mm Inside: 686 x 686 mm

Lid for trolley 200 liters - plastic

• Manufacturer: anders brolin ab

Funnel 200x110cm

Height 100cn

Arm protection for cutting

Protective apron for cutting

• Manufacturer: anders brolin ab

New and stainless Available in stock

Work table 355x140cm

Description Sausage table stainless length 3550 width 1400 height about 900

Compactor Husmann SPB 20 SW-E 20 m3, mobile

• Manufacturer: Husmann

Front and rear hitch eye Year according to: Type plate | User manual: No | Weight (kg): 4850 | Length: 6.3 m. | Width: 2.55 m. | Height: 2.65 m. | Other measurements: 20 m3.

EnviroPac EN 80 compactor for corrugated cardboard, plastic and silage plastic

• Manufacturer: EnviroPac

Year according to: Type plate | Power (kw): 5,5 | Width: 2200 mm | Height: 2000 mm | Depth: 950 mm | Other measurements: Voltage: 230/400, Amps: 21/12 | Loading assistance with: Truck

Compactor Maschinenfabrik Bermatingen Dixi 18 S

• Manufacturer: Dixi
• Model: 18 S

Power (kw): 4 | User manual: No | Width: 1520mm. | Height: 1970 mm. | Depth: 970mm. | Other measurements: V: 400, Amps: 9.5 | Loading assistance with: Truck

Paint box Dent Extend with drying box, ventilation, extraction and vehicle lift

• Manufacturer: Dent Extend

Year according to: Documentation | Type plate: missing | User manual: Yes, included | Other measurements: Paint box outer dimensions Approximate length 8000mm Approximate width 4800mm Approximate height 3400mm D...

BLAST CHILLER/FREEZER SQX FT2080

• Manufacturer: Sin of Cold

Blast chiller/Freezer delivered by Colia Sweden AB. All information is in the uploaded brochure. Warranty valid for 12 months. Service and installation offered by Assemblin across Sweden.

Extraction arms PlymoVent 2pcs

• Manufacturer: Plymovent

Type plate: missing | User manual: No | Length: 2pcs approximately 2000mm

Impact press/marking press 3 tons - MB20

Type plate: missing | User manual: No | Weight (kg): 35 kg | Width: 205 mm | Height: 650 mm | Depth: 309 mm | Loading assistance with: Truck