Used Cnc Lathes in Lombardy, Italy

SPINNER TC77 SMCY counter spindle Y-axis motorized cnc lathe

• Manufacturer: Spinner

Used SPINNER TC77 SMCY counter spindle Y-axis motorized cnc lathe The used SPINNER TC77 SMCY counter spindle Y-axis motorized cnc lathe is a robust CNC tilting bed lathe with ASA 8″ size flat guideways, with BARU...

TORNOS AS 14-6 multi-spindle lathe

• Manufacturer: Tornos
• Model: AS14

No. 6 spindles. Max bar passage: Round: 14 mm - Square: 10 mm - Hexagonal: 12 mm Max feed length: 75 mm. Spindle: Number of speeds: 16 - Spindle revolutions: 900-6000 rpm. - Production cycles: no. 22 Production c...

TORNOS AS 14-6 multi-spindle lathe

• Manufacturer: Tornos
• Model: AS14

No. 6 spindles. Max bar passage: Max feed length: 75 mm. umber of speeds: 16 - RPM: 900-6000 rpm - Production cycles: 22 Production cycle range: pieces per minute 4.9 to 72 - seconds per piece 12.2 to 0.84. No. 6...

HARDINGE CONQUEST T42L motorized 3-axis cnc lathe

• Manufacturer: Hardinge
• Model: Conquest T42

Used HARDINGE CONQUEST T42L motorized 3-axis cnc lathe The used HARDINGE CONQUEST T42L motorized 3-axis cnc lathe is a rugged and precise CNC lathe with an inclined bed of medium size, turning length about 700mm,...

1986 STAR MOD. cnc lathe JNC 16

Automatic cnc sliding headstock lathe Turrets: Diameter: 16 mm. Max bar feed: 160 mm. Max bar feed with synchronized sleeve: 95 mm. Spindle speeds: 375 - 7,500 rpm. Drive motor power: Devices and Accessories: Acc...

2008 YU SHINE YS VL 1200 ATC

• Manufacturer: YU SHINE

Type: CNC MOTORIZED VERTICAL LATHE | Conditions: Used | Status: Good | Type of control: Fanuc 0i-TC | Table diameter: Ø 1.250 mm | Max. load on table: 5.000 Kg | Max. swing diameter: Ø 1.600 mm | Max. turning di...

Mori Seiki Lathe Zl150 SMC

• Manufacturer: Mori Seiki
• Model: ZL-150SMC

n. 1 Mori Seiki lathe model Zl150 SMC, year 2000 - ref. 1- Complete with Iemca Bar Feeder Model Boss 545/32L year 2003It is noted that the lathe's CNC does not start due to a fault (likely board failure)CE Declar...

2000 ERGOMAT A25 single-spindle lathe

• Manufacturer: Ergomat
• Model: A25

Single-spindle automatic cam lathe Max bar diameter: round 25 mm (1″) - hexagonal 22 mm - square 18 mm Distance between collet and tailstock: 240 mm Max turning length: 70 mm Max spindle rpm: 4000 rpm Production ...

2003 AVM ANGELINI OSCAR counter spindle motorized cnc lathe

Used AVM ANGELINI OSCAR counter spindle motorized cnc lathe The used AVM ANGELINI OSCAR counter spindle motorized cnc lathe is a fast CNC lathe with a small to medium size tilting bed, with ASA 6″ main spindle wi...

LATHE BIGLIA B565YS

• Manufacturer: Biglia
• Model: B 565
• Spindle bore: 76 millimeter

MAIN SPINDLE MAX. BAR DIAMETER: 70 MM MAX. TURNING DIAMETER: 290 MM MAX. TURNING LENGTH: 560 MM SPINDLE NOSE: A2-6 SPINDLE POWER: 11KW SPINDLE SPEED: 40-4000 RPM C AXIS: 360° INC. INDEXING 0.001° TURRET NUMBER OF...

1998 CITIZEN CINCOM E32 sliding headstock lathe

• Manufacturer: Citizen
• Model: E32

Automatic sliding headstock lathe Bar passage: 32 mm. Max bar feed: 320 mm Max drilling/tapping: Ø 16mm/M12. Spindle speed: 130 to 6000 rpm. Main tool turret: 12 positions Secondary tool turret: 12 positions Moto...

MAS KOSOVIT MT 70 x 2000 CNC LATHE

• Manufacturer: MAS KOSOVIT

Complete with: - n. 1 three jaws self centering chuck Ø 430 mm. - n. 1 x 8 positions turret - chipconveyor - full covered

2001 TAKAMAZ X20 HI SERVER 2-axis cnc lathe with gantry loader

• Manufacturer: Takamaz

Used TAKAMAZ X20 HI SERVER 2-axis cnc lathe with gantry loader The used TAKAMAZ X20 HI SERVER 2-axis cnc lathe with gantry loader is a fast CNC lathe with inclined shooting bench, 2 medium-sized axes with tailsto...

2005 HANKOOK VTC 85

• Manufacturer: Hankook
• Model: VTC 85

Type: CNC VERTICAL LATHE | Condition : Used | Status: Good | Control type: FANUC 21i-TB | Max. swing over bed: Ø 1,000 mm | Max turning diameter : Ø 850 mm | Max. turning length: 850 mm | X axis travel: 480 mm ...

HYUNDAI KIA SKT 21 LMS

• Manufacturer: Hyundai
• Model: SKT-21LMS

Type: CNC LATHE | Condition: Used | Status: Very good | Control type: Fanuc 21-i TB | Max. machining diameter: Ø 254 mm | Max. machining lenght: 531 mm | X axis: 221 mm | Z axis: 549 mm | Spindle speed: 6.000 rp...