Processing » Agitators, Blenders, Mixers » Agitators » Nauta

Building Filters

9

Used Nauta Agitators

  • Trusted Seller
    Nauta Type Mixer Delumber Mixer

    Nauta Type Mixer Delumber Mixer Delumper #14231

    • Manufacturer: Nauta

    Nauta type mixer delumper by hosokowa micron eaurope bv, type 18:065. 1, order # 33. 0014. Features stainless steel wetted parts, 7. 5" diameter three blade agitator, 10" diameter six bolt mounting flange, 1" liq...

    Marlboro, NJ
  • Trusted Seller
    70 CU. FT. NAUTA MIXER/VACUUM

    70 CU. FT. NAUTA MIXER/VACUUM DRYER – MODEL MBX 700 – S/S – JACKETED (#9062)

    • Manufacturer: Nauta

    1 – used 70 cu. ft. JH Day Nauta Vacuum Dryer/Mixer, model MBX 700. Stainless steel construction. Previously used with a 40 HP main drive (missing), 2 HP drive for orbiting of screw. Top is approx. 76 in. dia. an...

    USA
  • Trusted Seller
    70 CU. FT. NAUTA MIXER/VACUUM

    70 CU. FT. NAUTA MIXER/VACUUM DRYER – MODEL MBX 700 – S/S – JACKETED (#9063)

    • Manufacturer: Nauta

    1 – used 70 cu. ft. JH Day Nauta Vacuum Dryer/Mixer, model MBX 700. Stainless steel construction. Previously used with a 40 HP main drive (missing), 2 HP drive for orbiting of screw. Top is approx. 76 in. dia. an...

    USA
  • Trusted Seller
    70 CU. FT. NAUTA VACUUM

    70 CU. FT. NAUTA VACUUM MIXER/DRYER – S/S – JACKETED (#8042)

    • Manufacturer: Nauta

    1 – used 70 cu. ft. JH Day Nauta Vacuum Dryer/Mixer, model MBX 700. Stainless steel construction. 40 HP main drive, 2 HP drive for orbiting of screw. Top is approx. 76 in. dia. and tapers down to an approx. 12 in...

    USA
  • Trusted Seller
    76 CU. FT. J.H. DAY

    76 CU. FT. J.H. DAY NAUTA VACUUM MIXER MODEL FB-76 -- S/S (#9281)

    • Manufacturer: Nauta

    1 - used 76 Cu.Ft. (2,150 L/560 gal) JH Day Stainless Steel, Full Vacuum Rated Nauta Mixer system/Conical mixer. Model MK 2 FB-76. 304 Stainless Steel. Has 20 HP, 230/460 volt, 1800 rpm drive for orbital arm with...

    USA
  • Trusted Seller
    Mixer, Nauta, 50 CF, Stainless

    Mixer, Nauta, 50 CF, Stainless Steel, 8' Diameter #S744844

    • Manufacturer: Nauta

    Stainless Steel Nauta Mixer, approximately 50 cubic feet capacity, measures 6' diameter x 8' deep, 60 degree cone with 10" diameter center bottom outlet with dust tight valve. Includes welded side connection at b...

    Brisbane, CA
  • Trusted Seller
    50 cu ft stainless steel

    50 cu ft stainless steel nauta mixer

    • Manufacturer: Nauta

    Used 50 Cu Ft Stainless Steel Nauta mixer. 6'D x 8'L cone with 10" Center bottom outlet. Auger driven by 10 HP motor. 2Hp agitator arm drive top mounted. Control panel runs mix mode, discharge, nauta screw and ar...

    Red Bank, NJ
  • PHARMING Conical Nauta type powder

    PHARMING Conical Nauta type powder mixer

    • Manufacturer: Nauta

    Used stainless steel 1000 L conical Nauta-type powder mixer made by Pharming. Suitable for mixing powders blends. Screw agitator lifts product upwards and in the same time travels around the internal wall of the ...

    Warsaw, Poland
  • Nauta Mixer

    Nauta Mixer

    • Manufacturer: Nauta

    is a late-model mixing equipment with high uniformity, low energy cost, low residue and low crush. There are two asymmetric spiral shafts, with their self-rotation and revolution, materials are lifted repeatedly ...

    Shanghai, China

Overview

Agitators are essential devices used to stir or mix fluids in various industrial processes. They are commonly found in industries such as chemical, food and beverage, pharmaceuticals, and wastewater treatment. Agitators ensure uniform mixing, improve chemical reactions, and maintain product consistency. They come in different types, including top-entry, side-entry, and bottom-entry agitators, each suited for specific applications.

FAQ

What factors should I consider when purchasing an agitator?

Consider the type of fluid, the viscosity, the required mixing intensity, and the specific application. It's also important to assess the agitator's material compatibility with the fluids being mixed.

How can I ensure the agitator is shipped safely?

Choose a shipping provider experienced in handling industrial equipment. Ensure the agitator is properly packaged and secured to prevent any damage during transit.

What is the typical maintenance schedule for an agitator?

Regular maintenance includes inspecting seals and bearings, checking for wear or damage, and ensuring that all moving parts are lubricated. Follow the manufacturer’s guidelines for detailed maintenance procedures.