- Trusted Seller
3,500mm Ø x 1,200mm H Seonam
used
Additional info: Min. inside diameter(Mandrel dia.:300mm): 320mm Ring weight: Max. 12,500kgs (27,500 lbs) (Main roll) Diameter: 1300mm Height: 1400mm Rolling speed: Max. 1.5m/sec (Mandrel) Diameter: 300mm Horizon...
Rockville Centre, NY - Trusted Seller
45mm diameter Smeral UL 45A Cylindrical type
used
- Manufacturer: Šmeral Brno
- Model: UL 45
Moved to storage Immediately available Exceptional Condition
Rockville Centre, NY - Trusted Seller
1970 1200 ton Hatebur model AMP 70 Hi-Speed
used
Available for immediate inspection and delivery Dia: 60 mm | Tons: 1,200 tonnes | Builder: Hatebur | Part dia: 125 mm | Max cutoff length: 140 mm | Max die ejector: 130 mm | Part wt: 6 kgs | Min cutoff length: 45...
Rockville Centre, NY - Trusted Seller
4,000mm Dia x 1,000mm Height HBE PRESS
used
- Manufacturer: HBE
Additional info: Max Ring Weight: 10,000 kgs (22,000 lbs) Rolling speed: 0.33 - 1.50 mtrs/sec Mandrel Roll dims: 2,245mm length x 170mm diameter Mandrel horiz sliding: 800mm Axial Roll horiz sliding: 4,010mm Uppe...
Rockville Centre, NY - Trusted Seller
2006 80mm dia Jaewoo JCP-450
used
- Manufacturer: Jaewoo
Additional info: Minimum cutting diameter: 28mm Max cutting length: 450mm Minimum cutting length: 50mm Feeding motor power: 2.2 kW Very good working condition Available for immediate inspection and delivery Still...
Rockville Centre, NY - Trusted Seller
2015 5/8" x 5" National HS LS-DSSD Warm Header
used
Additional information: Machine was fully rebuilt in 2015 Complete with: Power Driven Uncoiler with a Multi-Roll Pre-Straightener Ambrell EKOHeat 65/100 65kW Induction Heater new 2013 HYFRA (German) Cooling syste...
Rockville Centre, NY - Trusted Seller
6000mm dia Kaltek Ring Rolling Mill, 80~1100 Ring Height
used
Additional info: Replacement of PLC Control system, PLC Main panel & Operator's panel to brand new Siemens S7-400 Upgrade of Hydraulic system Replacement of packing and seals Replacement of bearings Current Volta...
Rockville Centre, NY - Trusted Seller
1970 1,200 ton Hatebur AMP-70 4-Die, max bar dia
used
Still installed and under power for inspection Very Good working condition Available for immediate inspection and delivery
Rockville Centre, NY - Trusted Seller
1980 440 ton 3-1/2" dia Peddinghaus Caddy 80 Bar
used
- Manufacturer: Peddinghaus
Additional info: Cutoff capacities at material tensile strengths: Rounds: psi 65,000 - 3.500" psi 92,000 - 3.156" psi 121,000 - 2.750" Squares: psi 65,000 - 3.937" psi 92,000 - 3.562" Flats: psi 65,000 - 7" x 1.3...
Rockville Centre, NY - Trusted Seller
1980 1,200 ton National model 6-4 Heavy
used
- Manufacturer: National
Complete with: Spare parts as follows : (1) Main Electric Motor (2) Adjusting Wedges (1) Upper transfer finger assembly (1) Lower transfer finger assembly (1) Die Block clamping piston This National 6-4 was used ...
Rockville Centre, NY - Trusted Seller
3,500mm Asian Built Radial Axial Ring Rolling Mill Re:24925
used
- Manufacturer: Asian Built
Dia: 3,500 mm | Height: 800 mm | Builder: Asian Built | Radial: 280 tonnes | Axial: 180 tonnes | Min dia: 650 mm | Number of main roll motors, current type & power of each: One DC @ 500kW | Number of axial roll ...
Rockville Centre, NY - Trusted Seller
2,800mm Banning RWW H120/V100 CNC
used
- Manufacturer: Banning
Max Ring diameter - 2,800mm (110") Max Ring height - 500mm (19.7") Radial tonnage - 120 tons Axial tonnage - 100 tons Max Ring Blank weight is 2,000 kg Radial (King) Roll drive power - 315 kW (422 hp) Axial (Edgi...
Rockville Centre, NY - Trusted Seller
Anvil by Trexton
used
- Manufacturer: Trexton
31" long x 12.5" H, 12" horn, 1" square tool holder, Forged Steel, on home made stand
$2,000 USDMinneapolis, MN Cold Header 3 mm, 1 Die 2 Blow P-371 AP
used
“Good Usable Condition- May Require some attention” Cold Header 3 mm, 1 Die 2 Blow Make: Ayase Model AS-OH Serial #: 53602 This machine has been covered and protected but it was outside. Although the owner believ...
$4,500 USDBay Shore, NY- Trusted Seller
Ajax Magnathermic 1,650 lb. Ladle
used
- Manufacturer: Ajax Magnathermic
S# 00296, With hydraulic unit, "Ladle only", Inside pot measurements 16"Round x 28"D, 750 volts 300kw 180hz
$3,500 USDMinneapolis, MN 
Šmeral Brno ULS 55 Forging
used
- Manufacturer: Šmeral Brno
- Model: ULS 55
Good condition Šmeral Brno ULS 55 Forgings manufactured in 2009. Located in USA and other countries. Click request price for more information.
Europe
Tip: Enter manufacturer, model or keyword
