KB3882 Tecnosens
- Manufacturer: Tecnosens
The KB3882 photo switch consists of an infrared LED and a photo IC. Its main features are: - Dust-proof housing; - The distance between the emitter and the detector can be adjusted from 1 to 100 mm; - Minimum pow...
Brescia, ItalyKB3820 Tecnosens
- Manufacturer: Tecnosens
The KB3820 photo switch consists of an infrared LED and a phototransistor. Its main features are: - Dust-proof housing; - Detection distance up to 200 mm; This photo switch is recommended for applications requiri...
Brescia, Italy
KB3390 Tecnosens
- Manufacturer: Tecnosens
The KB3390 model consists of an infrared LED and a phototransistor. Features: The distance between the emitter and receiver can be adjusted from 1mm to 100mm. Super dustproof. Snap-in connector. Applications: Obj...
Brescia, Italy
KI1400 Tecnosens
- Manufacturer: Tecnosens
Model KI1400 consist of an LED with digital IC output. Features: Amplified with open collector outputs Internal LED driving resistor Applications: Card detector , banknotes. Coin passage detection for vending mac...
Brescia, Italy
KI1320 Tecnosens
- Manufacturer: Tecnosens
Model KI1320 consist of an LED with digital IC output. No opening on the light-passing surfaces between emitter and receiver. Features: Amplified with open collector outputs Dust proof High resolution: slit widt...
Brescia, Italy
KI1324 Tecnosens
- Manufacturer: Tecnosens
Model KI1324 consists of a high-sensitivity LED with analog output. No openings on the light-passing surfaces between the emitter and receiver. Features: Dustproof High resolution: 0.5mm slit width Visible light ...
Brescia, Italy
GUVx-T1xGC-TLW5 Tecnosens
- Manufacturer: Tecnosens
Features: Water Environment (<10 bar), Single Supply Voltage, 0-5V Voltage Output. Application: UV Power Measure, UV Lamp Monitoring, Temperature Monitoring.
Brescia, Italy
GUVx-T1xGC-5LW9 Tecnosens
- Manufacturer: Tecnosens
Features: Water Environment (<10 bar), Single DC Supply Voltage, 0-5V Voltage. Application: UV Power Measure.
Brescia, Italy
GYSE-A Tecnosens
- Manufacturer: Tecnosens
The probe's internal element can be separated from the external case (a standard feature for GYSE probes). Additionally, a flexible element can be used as an option, making the exchange process extremely simple e...
Brescia, Italy
GYSE-P Tecnosens
- Manufacturer: Tecnosens
This magnetostrictive transducer uses a Profibus DP interface and allows the use of 32 magnets on a single probe. The probe is removable from the external case.
Brescia, Italy
GYRHP-MRA Tecnosens
- Manufacturer: Tecnosens
The GYRHP-MRA transducer is different from the conventional GY series. 70MPa pressure-resistant design in the head and shaft. The standard protection rating is IP67, but waterproof (IP68) or conduit type (IP69K) ...
Brescia, Italy
GYMS (probe) / GYHC (controller) Tecnosens
- Manufacturer: Tecnosens
The GYMS magnetostrictive transducer is a standard, compact model with the following features: Linearity: 0.025% FS Protection: IP67 The GYMS probe can be combined with the GYHC controller, 0-10V, or 4-20mA.
Brescia, Italy
Brescia, Italy
GYSE-R-PF Tecnosens
- Manufacturer: Tecnosens
The GYSE-R-PF probe together with the GYDC-05 controller provides a resolution of Min. 1��m GYSE-R-PF �� capable of providing high robustness at the expense of noise.
Brescia, Italy
GYSE-Q-PF Tecnosens
- Manufacturer: Tecnosens
Incremental output (A/B), min. resolution 1 ��m m. The working principle is based on a sampling detection method, in which the pulse frequency is set to 250 kHz (standard).
Brescia, Italy
Tip: Enter manufacturer, model or keyword
