Used Lathes in France

Copying lathe MULLER ET PESANT GALLIMAT

• Manufacturer: Muller

TICINO Lathe

• Manufacturer: EST Ticino

TICINO Lonate Pozzolo Lathe — specialized for calibrator rollers (galets calibreur). Optimized for cylindrical groove profiling and diameter control This lot is part of a combination lot: 60 Roll Turning Shop Not...

SCULFORT Lathe

• Manufacturer: SCULFORT

SCULFORT Lathe — dedicated to machining rolls for the piercer and rotary sizer mills. Handles large-diameter tooling with high torque and rigidity This lot is part of a combination lot: 60 Roll Turning Shop Not t...

CAZENEUVE Lathe

• Manufacturer: Amutio - Cazeneuve

CAZENEUVE Lathe — 8 liter capacity auxiliary machining tasks, small components, and light roll adjustments This lot is part of a combination lot: 60 Roll Turning Shop Not the machine you are looking for? Send us ...

JUPITER Lathe

• Manufacturer: Jupiter

JUPITER H. Ernault_Bartignolles 830 Lathe — used for elongation mill rolls, capable of handling conical geometries and long tooling shafts This lot is part of a combination lot: 60 Roll Turning Shop Not the machi...

ERNAULT BATIGNOLLES HN 500 horizontal parallel lathe

Between centres 1600 mm - Dimensions 3302 x 1535 x 1230 mm - Maximum diameter above the bench 500 mm - Maximum diameter above the cast iron slide 320 mm - Maximum diameter above the steel slide 320 mm - Maximum d...

COMEV PICODUE 400 numerically controlled horizontal lathe

• Manufacturer: Comev

Year 2008 - Height at centre point 400 mm - Maximum diameter on bench 800 mm - Distance between centres 4000 mm - Maximum diameter above carriage 460 mm - 8-tool turret - Bench width 400 mm – Spindle bore 110 - C...

Conventional parallel lathe H.ERNAULT-SOMUA 75

• Manufacturer: Ernault Somua

Manufacturer: H. ERNAULT-SOMUA Model: 75 Machine type: Conventional parallel lathe Distance between centers: 1,000 mm

MULTISPINDLE LATHE WICKMAN 1”

1 USED MULTISPINDLE LATHE WICKMAN 1” Equipped with : 2 Independents 1 Drum + Support 1 Chips conveyor

MULTISPINDLE LATHE WICKMAN 1”

1 USED MULTISPINDLE LATHE WICKMAN 1” 6 Spindles Equipped with : 1 Pick up 2 Independent Slides 1 Chip Conveyor 1 Drum + Support

MECHANICAL LATHE SCHAUBLIN 102

• Model: 102

USED MECHANICAL LATHE SCHAUBLIN 102 Equipped with : 1 Collet clamping F38 1 Recovery cross slide

MECHANICAL LATHE SCHAUBLIN 102

• Model: 102

USED MECHANICAL LATHE SCHAUBLIN 102 Equipped with : 1 Clamping W20 pliers 1 Recovery tailstock 1 Mechanical cross slide 1 Headstock with fly harness

MULTISPINDLE LATHE WICKMAN 1”

USED MULTISPINDLE LATHE WICKMAN1” Equipped with : 1 Pick up 2 Independents 1 Electromagnetic clutch 1 Chips conveyor 1 Barloader integrated PIETRO CUCCHI