Used Granulators & Pelletizers

ACCRAPAK SYSTEMS LAB PELLETIZER 18126

One (1) used Accrapak Systems model 750/1B laboratory strand pelletizer. 1″ entrance. 24 knife solid helical rotor. 1 HP drive motor. Includes 4″ air knife. S/N 5288-9-95

NELMOR G1012LS LOW SPEED GRANULATOR 16141

• Manufacturer: Nelmor

Nelmor model G1012LS low speed granulator. S/N 9206-31452. 10″ x 12″ feed throat, 5 knife solid rotor, 2 bed knife. 5HP 230/460V motor through a gearbox. Chain and sprocket driven rotor. Double wall top robot / h...

NELMOR G1012LS LOW SPEED GRANULATOR 16580

• Manufacturer: Nelmor

Nelmor model G1012LS low speed granulator. S/N 8710-26404. 10″ x 12″ feed throat. 5 knife solid rotor, 2 bed knife. 3HP 230/460V. SEW-Eurodrive motor and gearbox. Chain and sprocket driven rotor. Insulated top ro...

NELMOR G1820M1 GRANULATOR 18469

• Manufacturer: Nelmor

Nelmor model G1820M1. No S/N. 18″ x 20″ feed throat. 3 knife open rotor, 2 bed knives. Tangential cutting chamber. 30 HP 230/460-volt motor. Insulated conveyor feed hopper and body panels. 6″ OD right hand airvey...

NELMOR G1220M1 GRANULATOR WITH SIDE 16617

• Manufacturer: Nelmor

Nelmor model G1220M1 granulator. S/N 7612-10077. 12″ x 20″ feed throat, 3 knife solid rotor, 2 bed knife. 20HP 230/460V motor. Single wall tray feed hopper evacuated by a side mounted Nelmor model F410 1HP blower...

NELMOR G1220M1 GRANULATOR WITH PIPE 16678

• Manufacturer: Nelmor

Nelmor model G1220M1 granulator. S/N 8010-15995. 12″ x 20″ feed throat, 3 knife solid rotor, 2 bed knife, 25HP 230/460V motor. Left hand 10″ x 5.75″ side profile chute, in-feed only. Side mounted 5003FD 3HP blowe...

AEROMATIC FIELDER HIGH SHEAR SP1 STAINLESS STEEL Make Offer !!

• Manufacturer: AEROMATIC FIELDER

“Call Cleveland Process Equipment for more details” One used Aeromatic Fielder SP1, High shear granulator, two interchangeable bowls, all stainless steel. CONTACT CLEVELAND PROCESS EQUIPMENT FOR ALL YOUR EQUIPMEN...

GRANULATOR FEED ROLLS 6929

Used granulator feed rolls. 41.5″ wide x 4.5″ knurled steel feed rolls powered by a 2HP 1,750 RPM 230V/460V motor into a 15:1 gearbox. Rolls are chain and sprocket driven.

GRANUTEC TFG810-10 FEED ROLL GRANULATOR 17391

Granutec model TFG810-10 granulator, S/N 0109.4765, 8″ x 10″ feed throat, 3 knife rotor, 2 bed knife, 10 HP 460-volt motor, rear 10″ wide smooth steel feed roll in-feed powered by a 1/2 HP 90-volt D/C motor and v...

IRWIN CHESAW CH-LH 28.7-04 GRANULATOR 12598

• Manufacturer: Irwin

Irwin Chesaw type CS-LH 28.7-04 granulator, no serial number, 5″ x 33″ rotor cutter, 15HP 208-230/460V 1,760 RPM motor through a fan cooled 10:1 gearbox. Lincoln auto-lube system, evacuated by a 4″ auger system, ...

Nissui FNSK Granulators & Pelletizer

• Manufacturer: Nissui
• Model: FNSK

Good condition Nissui FNSK Granulators & Pelletizers manufactured in 1994. Located in Ireland and other countries. Click request price for more information.