Used Saws in Ohio, USA

Trusted Seller
36" DOALL VERTICAL BANDSAW Z22042B
- Manufacturer: DoAll
- Model: 36B-O
36" THROAT 24" X 24" TABLE 13" VERTICAL CLEARANCE 50-5200 RPM 3/4" BLADE BLADE WELDER 175" BLADE LENGTH 76" X 40" X 77" TALL 220/60/3
$3,950 USD
Monclova, OH
Trusted Seller
36" DOALL VERTICAL BANDSAW 13055D
- Manufacturer: DoAll
- Model: V-36
MODEL: V - 36 36" THROAT 30-1/2" x 30" TILTING TABLE BLADE WELDER 12" VERTICAL CLEARANCE 50 - 160 R.P.M. WORK LIGHT APPROXIMATE DIMENSIONS: 6' LR x 55" FB x 82" TALL APPROXIMATE WEIGHT: 2,000 LB GOOD CONDITION
$3,950 USD
Monclova, OH
Trusted Seller
25" x 28" MARVEL VERTICAL BANDSAW 15082
- Manufacturer: Marvel
- Model: 25/MI
MODEL #: 25M1 SERIAL #: F-11425 25" x 28" RECTANGLE CAPACITY AT 90 DEGREES 25" ROUND CAPACITY AT 90 DEGREES 25" x 16" RECTANGLE CAPACITY AT 45 DEGREES 18'10" x 1-1/2" x .050" BLADE SIZE 60 - 400 FEET/MINUTE V...
$15,950 USD
Get financing
Est. $313/mo
Monclova, OH
Trusted Seller
COSEN SH-500M SEMI AUTOMATIC SWIVEL HEAD
- Manufacturer: Cosen
- Model: SH-500M
Swivel saw head allows miter cutting from 0° to 60° Hydraulic cylinder plus precision ground hinge support Hardened worm gear for durability Hard stops at 0°, 45°, and 60° for quick angle set-up Capacity: 0°:Roun...
Cleveland, OH
Trusted Seller
DOALL C-1216A
- Manufacturer: DoAll
- Model: C-1216A
12" x 16" Flats, 15" Round Cap, IF DOING BUNDLE OF SMALL PARTS HAS NESTING VISE CLAMPS Blade Size: 1.5" x 162" x .035" Blade Speeds Variable.: 40 - 450 FPM EQUIPPED WITH: ...
Cleveland, OH
Trusted Seller
DOALL 16-M
- Manufacturer: DoAll
- Model: 16-M
10" HEIGHT X 16" THROAT 24" X 24" TILTING TABLE VARIABLE SPEED 50 TO 5200 FPM WITH HIGH/LOW SHIFTER WIRED 220/3/60
Cleveland, OH
Trusted Seller
MARVEL 8 MARK 2 II
- Manufacturer: Marvel
- Model: 8 Mark II
MARVEL 8 MARK II Vertical Bandsaw available. Used condition, 1" blade width, 174" blade length, speed range of 50 to 450 FPM. Ideal for precision cutting tasks. 18" X 22" MARVEL #8 MARK II VERTICAL BANDSAW
Cleveland, OH
Trusted Seller
MILFORD 10" x 16" Rectangles, 10" Rounds
- Manufacturer: MILFORD
USED MILFORD AUTOMATIC HORIZONTAL BANDSAW Manufacturer: Cutting Capacity 10" x 16" Rectangles, 10" Rounds Band Speed Variable Blade Tension Feed Control Blade Wheels cast iron Coolant System Re-Circu...
Cleveland, OH
Trusted Seller
WELLSAW 1338-SA
- Manufacturer: Wellsaw
- Model: 1338-SA
Rect-cap (h): 13.0 in | Rect-cap (w): 38.0 in | Rounds-cap: 13.0 in | Type (auto, manual, semi): Semi | Blade width: 1.0 in | Blade thickness: 0.035 in | Blade length: 186.0 in
Cleveland, OH
Trusted Seller
WELLSAW 1316S
- Manufacturer: Wellsaw
- Model: 1316S
See attached pdf for detailed BROCHURE and SPECIFICATIONS
Cleveland, OH
Trusted Seller
WELLSAW 1316S-SA
- Manufacturer: Wellsaw
- Model: 1316S-SA
See attached pdf for detailed BROCHURE and SPECIFICATIONS
Cleveland, OH
Trusted Seller
ROLL-IN JE1320
- Manufacturer: Roll-In
- Model: JE1320
See attached pdf for detailed BROCHURE and SPECIFICATIONS
Cleveland, OH
Trusted Seller
WELLSAW WELLSAW 600
- Manufacturer: Wellsaw
*SPECIFICATIONS WERE TAKEN FROM MANUFACTURERS INFORMATION AND SHOULD BE VERIFIED. Rectangular 6" High x 13" Wide Rounds 6-1/2" Diameter or 6" Pipe 45° Angle 6-1/2" Wide x 6" High Blade Speed FPM 50, 90, 160, 250...
Cleveland, OH
Trusted Seller
GROB 2S36U
- Manufacturer: Grob
- Model: 2S36U
36" THROAT 1" BLADE BUT SHOWS UP TO 1 1/2" BLADE 20" HEIGHT 36" X 36" TILTING TABLE 3 SPEED GEAR BOX WITH VARIABLE DRIVE UP TO 15,000 FPM 10 H.P. 208/220/440 VOLT VARIABLE SPEED MOTOR BLADE WELDER
Cleveland, OH
Trusted Seller
WELLSAW WELLSAW #8-M
- Manufacturer: Wellsaw
10" x 16" Max Capacity Rectangular (HxW) Max Capacity Round 10" Blade Size (LxWxT) 3/4" x 11’6" x .035" Blade Motor 1/2 H.P. Single phase 110 / 220v Work Height 26" Weight 850 lbs Floor Space (LxWxH) 82" x 43" ...
Cleveland, OH
DoAll C-305NC Saw
- Manufacturer: DoAll
- Model: C-305NC
Good condition DoAll C-305NC Saws. Located in Netherlands and other countries. Click request price for more information.
Netherlands