Used Agitators, Blenders, Mixers

Stainless Steel Horizontal Paddle Mixer Blender 35 Cu/Ft

ITEM #: 20680 Used Stainless Steel Horizontal Paddle Mixer Blender 35 Cu/Ft Stainless steel mixing chamber measures 30"W X 78"L X 35"D.Overall dimensions: 110" L x 62" W x 70" H. Weight = 2,056 lbs. All prices ar...

40 Cu Ft Gemco Double Cone Blender, S/S

• Manufacturer: Gemco

40 Cu Ft Gemco Double Cone Blender, S/S Used 40 cu ft Gemco double cone blender, stainless steel construction, rated 65#/cu ft max material density, on stand with 20 hp, 230/460 volt motor drive, serial# B-84200,...

50 cu ft Patterson Kelley Twin Shell Blender

• Manufacturer: Patterson-Kelley

50 cu ft Patterson Kelley Twin Shell Blender Used 50 cu ft Patterson Kelley twin shell blender, Stainless Steel, Rated for 100#/cu ft max material density, 7.5HP drive. 10" Valve. Approximately 75" leg extensions...

50 cu ft Patterson Kelley Twin Shell Blender

• Manufacturer: Patterson-Kelley

50 cu ft Patterson Kelley Twin Shell Blender Used 50 cu ft Patterson Kelley twin shell blender, Stainless Steel, Rated for 100#/cu ft max material density, 7.5HP drive. 10" Valve. Approximately 63" leg extensions...

85 Cu Ft Walter Equipment Ribbon Blender, S/S

• Manufacturer: Walter Equipment

85 Cu Ft Walter Equipment Ribbon Blender, S/S Used 85 Cu Ft Walter Equipment Ribbon Blender, model 085, stainless steel construction, serial# R140, built 1980.

50 cu ft Patterson Kelley Twin Shell Blender

• Manufacturer: Patterson-Kelley

50 cu ft Patterson Kelley Twin Shell Blender Used 50 cu ft Patterson Kelley twin shell blender, stainless steel construction, rated 95#/ cu ft maximum material density, on stainless steel stands, driven by 10 hp...

125 cu ft Patterson Kelley Twin Shell Blender

• Manufacturer: Patterson-Kelley

125 cu ft Patterson Kelley Twin Shell Blender Used 125 cu ft Patterson Kelley twin shell blender, stainless steel construction, rated 75#/cu ft maximum material density, on stainless steel stands driven by 20 hp,...

150 Cu Ft Ribbon Blender, C/S, 20 HP

150 Cu Ft Ribbon Blender, C/S, 20 HP Used 150 cu ft ribbon blender, carbon steel construction, approximately 48" wide x 144" long trough, driven by 20 hp motor, with drag conveyor bottom hopper, with controls and...

30 Cu Ft Gemco Double Cone Blender, S/S

• Manufacturer: Gemco

30 Cu Ft Gemco Double Cone Blender, S/S Used 30 cu ft Gemco double cone blender, stainless steel construction, rated 100#/cu ft max material density, provision for internal bar and gemcomatic loader/unloader(both...

100 Cu Ft Aaron Process Ribbon Blender, S/S

• Manufacturer: Aaron Process

100 Cu Ft Aaron Process Ribbon Blender, S/S Used 100 Cu Ft Aaron Process ribbon blender, stainless steel construction, approximately 46" wide x 94" long trough, double ribbon, outboard roller bearings, packing gl...

1 HP SEW-Eurodrive Side Agitator Assembly

• Manufacturer: SEW-Eurodrive

1 HP SEW-Eurodrive Side Agitator Assembly Used 1 hp SEW-Eurodrive side entering agitator drive, type KAF47DRE80M4/DH, 230/460 volt, 3 phase, 60 hertz, 1740 rpm motor, 15.86:1 ratio, stainless steel shaft and blad...

Marion Paddle Mixer/Blender - 35cu.ft. - Carbon Steel

• Manufacturer: Rapids Machinery Company

Mixer was tested as seen in video - Unit was connected directly to power without any soft start or control box - Currently safeties and air powered locks have not been tested and are not functioning. Unit is USED...

10 HP Pfaudler Agitator Drive, 5 DTW

• Manufacturer: Pfaudler

10 HP Pfaudler Agitator Drive, 5 DTW Used 10 hp Pfaudler agitator drive, size 5DTW, with seal housing and 10 hp flange mounted xp motor, serial# 500011-P.

5 HP Lightnin Agitator Drive, 125 RPM

• Manufacturer: Lightnin

5 HP Lightnin Agitator Drive, 125 RPM Used 5 HP Lightnin agitator drive, model 216-TESS-5.2, right angle design, 125 RPM output, 14.09:1 ratio, less motor.

1 Cu Ft Bectochem Twin Shell Blender, S/S

• Manufacturer: Bectochem

1 Cu Ft Bectochem Twin Shell Blender, S/S Used 1 cu ft Bectochem twin shell blender, model GMP, type 'Y' Blender, 316 stainless steel product contact surfaces, stainless steel covers, centi-lever design on base, ...