Dabergotz, Germany
Müro/Office vibrating table
- Manufacturer: Müro
for vertical smoothing of small-format printed sheets, form sets or pads, and brochures before gluing Vibrating surface approx. 55 x 35 cm Infinitely adjustable vibration Maximum load 25 kg 220 volt Other areas o...
Dabergotz, Germany
Müro magnetic motor table vibrator with cassette compartment and adjustable vibration strength
- Manufacturer: Müro
220 volt
Dabergotz, Germany
Müro grooving cutter for block glue carousel or block glue press
- Manufacturer: Müro
The MÜRO groove cutter is used to reinforce the block gluing of brochures, Catalogs, lists, calendars and weighing cards (sets of forms on cardboard backing). Number of grooves per operation: 10 Groove spacing: 9...
Dabergotz, Germany
Muero VB 95 oder VB 65
- Manufacturer: Müro
The film cutter is a precision cutter for flat films, foils and paper. The illuminated millimeter foil and the lateral stop allow the originals to be aligned very precisely. The press bar on the film cutter preve...
Dabergotz, Germany
2001 Muero ST 61×76
- Manufacturer: Müro
Mobile sheet jogger for depositing and smoothing collated form sets and brochure layers as well as printed sheets. Adjustable shaking force by means of adjustable unbalance nut on the motor shaft. Adjustable spee...
Dabergotz, Germany
2004 Muero 4 x 5000 A
- Manufacturer: Müro
for mass production of form sets, brochures, catalogs, weighing cards, calendars, writing pads in pads, emergency pads, receipt pads, writing pads and note cubes 4 presses with a stacking height of 50 cm each on ...
Dabergotz, Germany
2007 Muero Muero 4 x 5000 A 3 WT
- Manufacturer: Müro
Müro block gluing line 4 x 5000 A3 WT 2 in mint condition for mass production of form sets, brochures, catalogs, weighing cards, calendars, Writing pads in pads, emergency pads, receipt pads, writing pads and not...
Dabergotz, Germany
2002 Muero 5000 A3 WT
- Manufacturer: Müro
This block glue press has a mobile base, hot air fan drying, heat deflector for uniform drying and press insert for small stacks. The advantage of the A3 press lies in its larger holding capacity for A 3 piles an...
Dabergotz, Germany
2010 Muero 5000 A 3 TM (Tischmodell)
- Manufacturer: Müro
for DIN A 3 format or 2-pocket gluing of pads, form sets and A 5 brochures Accessories: press insert for small stacks Stacking height: 52.5 cm Press width: 52.5 cm Press depth: 32 cm Weight: approx. 29 kg
Dabergotz, Germany
2008 Muero 5000 A4 WT
- Manufacturer: Müro
mobile base Hot air blower drying Heat sheet for uniform drying and press insert for smaller stacks Holding capacity for A 4 stacks Gluing of form sets or brochures DIN A 5 Stacking height: 50 cm Press width: 35 ...
Dabergotz, Germany
Muero ST 46×68
- Manufacturer: Müro
mobile with foot switch for ON/OFF and tilt adjustable for depositing and smoothing collated form sets and booklet layers as well as printed sheets Adjustable shaking force by means of adjustable unbalance nut on...
Dabergotz, Germany
2011 Muero 2000 A 4 WT
- Manufacturer: Müro
for old filing, pads, brochures and form set gluing Quick drying with hot air blower 1100/2150 watts in 3 - 5 minutes effortless operation Safe and easy spindle pressing, relocatable for DIN A 4 and DIN A 5 Clear...
Dabergotz, Germany
Tip: Enter manufacturer, model or keyword