New Processing in Michigan, USA

Chicago Pneumatic CP-0117-S Air Jack Hammer Demolition Breaker 80 lbs Class

• Manufacturer: Chicago Pneumatic

Overview: CP 0117, CP 0117 S Drawing heavily on traditional breaker design, the breakers in the CP 0117 series are hard hitting with a somewhat lower impact rate. The CP 0117 is available with two different shank...

Sullair MCH4-HX-RD Air Chipping Hammer Breaker Demo Buster .580" Hex

• Manufacturer: Sullair

Sullair chipping hammer. Weight: Approx. 20 Lbs | Piston stroke: 4-1/4" | Bpm: 1800 | Bore: 1-1/8" | Air consumption: 30 CFM | Chuck: .580" Hex

Chicago Pneumatic CP0017-SVR Chipping Hammer Breaker 3" w/Screw On Retainer

• Manufacturer: Chicago Pneumatic

CP 0017 SVR • Brand new isolator assembly unit: more reliable, easily maintained and giving lower vibration levels • Closed grip ’’D’’ handle for maximum effectiveness and operator comfort • Hardened steel piston...

Michigan Pneumatic MP-TPB90-114 Pavement Breaker Demolition Jack Hammer 90 lbs

Michigan Pneumatic paving breaker. Weight class: 90 lbs | Actual weight: 91 lbs | Bpm: 1200 | Bore: 2-5/8" | Stroke: 6-1/2" | Chuck size: 1-1/4" x 6" hex

Michigan Pneumatic MP-TPB60-114 Pavement Breaker Demolition Jack Hammer 60 lbs

Michigan Pneumatic paving breaker. Weight class: 60 lbs | Actual weight: 66 lbs | Bpm: 1400 | Bore: 2-1/4" | Stroke: 5" | Chuck size: 1-1/4" x 6" hex

Chicago Pneumatic CP 4131 3R Chipping Hammer Breaker 3" w/Quick Change Retainer

• Manufacturer: Chicago Pneumatic

Chicago Pneumatic D-handle chipping hammer with quick change retainer.

Chicago Pneumatic CP0016 Chipping Hammer Breaker 3" w/Screw On Retainer

• Manufacturer: Chicago Pneumatic

Chicago Pneumatic D-handle chipping hammer with screw on retainer

Michigan Pneumatic MP-TPB60-118 Pavement Breaker Demolition Jack Hammer 60 lbs

Michigan Pneumatic paving breaker. Weight class: 60 lbs | Actual weight: 66 lbs | Bpm: 1400 | Bore: 2-1/4" | Stroke: 5" | Chuck size: 1-1/8" x 6" hex

Michigan Pneumatic MP-TPB40-C Pavement Breaker Demolition Jack Hammer 40 lbs

Michigan Pneumatic paving breaker. Weight class: 40 lbs | Actual weight: 41.5 lbs | Bpm: 900 | Bore: 1-3/4" | Stroke: 5-3/4" | Chuck size: 1" x 4-1/4" hex

Chicago Pneumatic BRK70HBP Hydraulic Jack Hammer Demolition Breaker 60 lbs Class

• Manufacturer: Chicago Pneumatic

Chicago Pneumatic hydraulic jack hammer. Part number: 1801-3647-45 | Approx. weight: 60 lbs | Oil flow: 5 - 8 GPM | Working pressure: 1668 - 1886 PSI | Bpm: 1350 - 1750 | Chuck: 1-1/4" x 6"

Dry Coolers MW Series Closed-Circuit Evaporative Cooling Tower

• Manufacturer: Dry Coolers

Highly efficient, corrosion-resistant, closed-circuit evaporative cooling tower The MW Series Closed-Circuit Evaporative Cooling Tower is a compact, highly efficient counterflow tower with a built-in copper tube ...

Dry Coolers OpenLOOP HC Series Pump Station

• Manufacturer: Dry Coolers

Packaged, open-loop pump station allowing separate processes to share a tank The OpenLOOP HC (Hot-Cold Well) Series Pump Station is a packaged, open-loop water system featuring a dual-chambered, stainless steel t...

Dry Coolers Omni-Chill PWC-SW Series Chiller

• Manufacturer: Dry Coolers

Reliable, packaged water-cooled process chiller for indoor installations The Omni-Chill PWC-SW Series Chiller reliably cools processes under a range of operating conditions, including intermittent loading, therma...

Dry Coolers LSX Series Spot Cooler

• Manufacturer: Dry Coolers

Packaged, open-frame air-cooled heat exchanger with integrated pump, tank, and controls The LSX Series Spot Cooler combines the AquaVent AVI Series Air-Cooled Heat Exchanger with a factory-mounted pump, tank and ...

Dry Coolers AquaVent AVR Air-Cooled Heat Exchanger

• Manufacturer: AVR

Reliable, high-efficiency, air-cooled heat exchanger The AquaVent AVR is a reliable, low-maintenance, air-cooled heat exchanger widely used to cool closed-loop processes where the fluid temperature is close to am...