Used Cooling Towers

Marley 5 Cell Cooling Tower, Model# NCC213CS, S/N 125416-003-98

Marley 5 Cell Cooling Tower, Model# NCC213CS, S/N 125416-003-98

HydroThrift PCX-130-1 Closed-Loop Liquid-to-Liquid Cooling System 125PSI 3PH

• Manufacturer: HydroThrift

“UNTESTED.” HydroThrift PCX-130-1 Closed-Loop Liquid-to-Liquid Cooling System 125PSI 3PH HydroThrift PCX-130-1 Closed-Loop Liquid-to-Liquid Cooling System 125PSI 3PH 10HP 460V 60Hz 14FLA Shipping Shipping cost: C...

2015 Process Systems Cooling Tower Pump Skid, 480 V, S#1007-01

2015 Process Systems Cooling Tower Pump Skid, 480 V, S#1007-01, Includes Process Systems Inc Model CC-253008G-BBF-488 Cast Iron Centrifugal Pump, 30 HP, 3560 RPM, 230/460 V- QTY 2, Thermofin Plate and Frame Heat ...

2014 BAC S3E-1222-10P

• Manufacturer: BAC

BAC Cooling Tower, Model S3E-1222-10P rated at 757 TondR. Certified Capacity 3263 USGPM of water from 98.6F to 89.6F at 78F entering air wet bulb, Galvanized Steel. Single cell with 40 HP fan motor. Two sections ...

2 BAC Model VT1-680-PMC Cooling Towers #39951

• Manufacturer: BAC

(2) Bac Cooling Towers, Model Vt1-680-pmc, 680 Ton Capacity, Certified Capacity, 1750 Usgpm Of Water From 95 F To 85 F At 78 F At 0.9 Psig Spray Pressure, 25 Hp, 1800 Rpm, 3 Phase, 60 Hz, 460 Volt, Tefc Enclosure...

Marley Cooling Tower 350 Ton

• Manufacturer: Marley

This Cooling tower will be removed for service on March 1 SERIAL#: 10015574 MODEL#: NC8405PAN1SGF YEAR: 2009 TOWERS: 1 CELLS: 1 STARTUP DATE: 11/24/2009 GPM: 1,050 TONNAGE: 350 HOT WATER TEMP: 95 COLD W...

Used "Marley" 586 (1) Cell Cooling Tower

• Manufacturer: "Marley" by G.T.G.

Used "Marley" 586 (1) Cell Cooling Tower. Unit rated 8700 GPM @ 120.8 HWT to 97.8 CWT, 80 WBT. This original Marly design was removed and rebuilt by G.T.G. using the following. All structural components are 3.5" ...

1996 SPX Marley NC2121GS

• Manufacturer: SPX Marley

Machine type: Process Equipment | Machine location: Ohio | Stock #: 897448 | Towers: 1 | Cells: 1 | Startup date: 05/31/1996 | Gpm: 660 | Tonnage: 220 | Hot water temp: 95 | Cold water temp: 85 | Wet bulb temp: ...

Process Systems Cooling Tower Water Pump Assembly with Tank and Cooling Water Filtration System

Process Systems Cooling Tower Water Pump Assembly and Cooling Water Filtration System Skid mounted system (2) tower process water pumps- 60 horse power each with 1000 gpm flow at 175’ TDH 450 gallon plastic roto ...

Split Case Pump for Cooling Tower Water, Model# 10x12x12B, Type 411BF, Serial no. 17-2510991,

Split Case Pump for Cooling Tower Water, Model# 10x12x12B, Type 411BF, Serial no. 17-2510991, Sized for 3500 gpm at 75 ft TDH, Pump rpm 1775, Motor 100 HP, Use: CT Pump North Aurora

Split Case Pump for Cooling Tower Water, Size 10x12x12B, Type 411BF, Serial no. 96-12905, Sized

Split Case Pump for Cooling Tower Water, Size 10x12x12B, Type 411BF, Serial no. 96-12905, Sized for 3500 gpm at 75 ft TDH, Pump rpm 1760, Motor 100 HP, Use: West Pump Aurora

Split Case Pump for Cooling Tower Water, Size 10x12x12B, Type 411BF, Serial no. 17-2510991, Sized

Split Case Pump for Cooling Tower Water, Size 10x12x12B, Type 411BF, Serial no. 17-2510991, Sized for 3500 gpm at 75 ft TDH, Pump rpm 1775, Motor 100 HP, Use: East pump Aurora

Process Engineering and Equipment Cooling Tower Water Pump Assembly with Heat Exchanger

Process Engineering and Equipment Cooling Tower Water Pump Assembly with Heat Exchanger Year off manufacture- 2011 Skid mounted system Skid designed to allow for top mounting of reservoir tank (2) Gould Model G&L...