Used Bottling Lines in Netherlands

Pharma Packing Bottle Filling Line, Model 8-1 VitaCount

• Manufacturer: Pharma Packaging System

Pharma Packing Bottle Filling Line, Model 8-1 VitaCount Used Pharma Packaging System bottle filling line consisting of: - Accumulation feed table, stainless steel construction. -Pharma Packaging Systems lane cou...

Lomasa compound liner

• Manufacturer: Lomasa

Tooling: 108 mm | Can shape: round

IMC 196 / 5-ML

• Manufacturer: IMC

Can / ends diameter minimum: 50 mm | Can / ends diameter maximum: 325 mm | Can shape: round | Speed (up to): 45 ends per minute

Karges Hammer AGR 100

• Manufacturer: Karges Hammer

Tooling: 127 mm | Can / ends diameter minimum: 50 mm | Can / ends diameter maximum: 100 mm | Can shape: round | Speed (up to): 350 ends per minute

Crabtree Marquess 4538 UV printing line

• Manufacturer: Crabtree

Pre-owned 1-colour printing line. Marquess press has a EPIC alcohol dampening system and curing is via Wallace Knight UV-oven with 3 lamps.

Food can manufacturing line Ø 83 mm

Pre-owned production line of open-top food cans. Line consist of Mawag KS 2 duplex slitter, Soudronic FBB 400 welding machine with FREI AG powder application system, curing oven, Blema KEZT 100 parting machine, G...

UN 20 liter conical pail line from MGR

Pre-owned manufacturing line for 20 LITRE conical pails. The line consists of, among others: ZHENGYI welder with 0.6 mm overlap, Jorson inside powder protection, ZHENGYI ouside lacquer unit, ZHENGYI induction cur...

Food can manufacturing line Ø 150 (or 153) mm

Pre-owned production line of open-top food cans. Line consist of Blema duplex slitter, FAEL LSW-11-150 welding machine, Precision Tools FDC internal powder and ORC external lacquer application system, Precision T...

2020 Naroska 2pc manufacturing line for Tuna and Sardine cans

• Manufacturer: Naroska

Running condition as new machine: Sizes of cans that can be produced Dia 83x38 mm /D83x40 mm/D83x43 mm and ¼ Club x 27.80 mm. Sheet layout of each size (mm) (D83x38 & 40)- 0.16 mm x 950.50 x 993.25 (TFS ) /(D8...

PLUG LID diameter 175 mm production line

Quality used Lug Lid manufacturing line consisting of: KD2326 40 ton stripfeed press, Sargiani S 945 CM 2T curling-lining machine.

Industrial can manufacturing line D73

Pre-owned very well maintained can making line consisting of: Soudronic VAA K 50 welder with CAN MAN static convertor (YoM 2020), Mecatronic lacquering unit for inside and outside type VXL-IMA and curing oven and...

2000 Shin-I S-A17A

• Manufacturer: Shin-I

Pre-owned compound lining machine with vertical drying oven running on ELECTRIC and heating up to 70 gr Celsius. Machine is like new, only used for testing by TATA Steel IJMUIDEN.

Compact manufacturing can making line canbody Ø 42 mm

Pre-owned line for Sweetened Condensed Dairy Blend (78 gram) canbodies, tops and bottoms. Diameter 42 mm, height 50 mm. Total installed base consist of: Krupp SDvt duplex slitter, Apolla blank transfer robot, Sou...

2012 Minster-Corima conversion line for Hansa and 99 mm EOE

• Manufacturer: Minster

Pre-owned production line for Hansa EO ends and round 99 mm EOE. Two presses Minster P2-75 with two Corima light tester, one Corima electrocoater and vertical drying oven existing of 2 lanes. Also available is th...

2006 LTG Mailander coating line with 36 meter tunnel-oven

Pre-owned varnishing line with type LTG 470 coater. Cooling zone is 6 meters long with double sheet stacking boxes. Incinerator also from LTG, running on Natural Gas, volume 10,000 Nm3/h. Total length of the line...