- Trusted Seller
Leduc, Canada - Trusted Seller
Monforts KNC 5
- Manufacturer: Monforts
- Model: KNC 5
Distance between the centers: 1.500 mm | Center height: 250 mm | Turning diameter above the support: 300 mm ø
Etten-Leur, Netherlands - Trusted Seller
1986 Lathe cycle-controlled by Monforts – KNC 5 1000 36200
- Manufacturer: Monforts
- Model: KNC 5
- Spindle bore: 60 millimeter
Heavy-duty lathe, cycle-controlled lathe, lathe, center- and feed-screw lathe, center- and feed-screw lathe, CNC lathe
Wiefelstede, Germany - Trusted Seller
2003 MONFORTS KNC 6
- Manufacturer: Monforts
- Model: KNC 6
- Spindle bore: 120 millimeter
Stock-No. 1034-13891 MONFORTS KNC 6 control: Machine with Monforts System Euro Turn control - quick tool change device MULTIFIX - 3-jaw chuck - coolant device - chip conveyor
Mönchengladbach, Germany - Trusted Seller
1996 MONFORTS KNC 5
- Manufacturer: Monforts
- Model: KNC 5
- Spindle bore: 71 millimeter
Stock-No. 1034-04241 MONFORTS KNC 5 control: with Teach In controll R&D MTC-K PARAT toolpost 1 fixed steday dia. 100 mm 4 jaw face plate dia. 500 mm coolant attachment
Mönchengladbach, Germany - Trusted Seller
1998 MONFORTS KNC 8S
- Manufacturer: Monforts
- Model: KNC 8
- Spindle bore: 130 millimeter
Stock-No. 1034-04240 MONFORTS KNC 8S control: with Teach In controll R&D MTC-K MULTIFIX toolpost size D coolant attachment
Mönchengladbach, Germany 2003 MONFORTS KNC 6 lathe – cycle-controlled
- Manufacturer: Monforts
- Model: KNC 6
Machine with MONFORTS System Euro Turn cycle control -Multifix steel holder steady rest Chip conveyor Coolant device 3-jaw chuck
Cologne, Germany- Trusted Seller
MONFORTS KNC 5 1500
- Manufacturer: Monforts
- Model: KNC 5
- Spindle bore: 80 millimeter
Control: MONFORTS CONTROL SYSTEM MTC | Centre height: 250 mm | Distance between centres: 1500 mm | Swing over cross-slide: 290 mm | Swing over bed: 500 mm | Taper in spindle: DIN 55027 | Transversal strocke (x a...
Brügg, Switzerland - Trusted Seller
Monforts KNC5 1500 I CNC Lathe
- Manufacturer: Monforts
- Model: KNC 5
- Spindle bore: 70 millimeter
We hereby offer this used Monforts KNC5 1500 CNC lathe from 2001, located in Germany. Equipped with the advanced Monforts Control System, offers precision and efficiency like no other. Its impressive capabilities...
$17,410 USDGermany 
MONFORTS KNC 8 2000 #1077-03735
- Manufacturer: Monforts
- Model: KNC 8
- Normal chuck diameter: 315/400/500 mm Work spindle drive: - Siemens Three-phase servo drives with mechanical safety clutch - Feed force Z-axis max.: 23.9 kN - Feed force X-axis max.: 11.3 kN - Rapid traverse sp...
Dorsten, Germany
1998 MONFORTS KNC 6-2000 #1077-03580
- Manufacturer: Monforts
- Model: KNC 6
The technical data are manufacturer or operator specifications and are therefore not binding for us. We reserve the right to prior sale; our terms and conditions of business and sale apply exclusively. About us m...
Dorsten, Germany- Trusted Seller
1999 Monforts KNC 6 S
- Manufacturer: Monforts
- Model: KNC 6
This Monforts KNC 6 S was manufactured in 1999. A robust horizontal turning machine featuring a maximum turning diameter over bed of 650mm and a maximum turning length of 2,000mm. It includes an R&D control unit,...
Germany 
1999 Monforts KNC 5S
- Manufacturer: Monforts
- Model: KNC 5
- Spindle bore: 70 millimeter
Cycle-controlled lathe Equipment: - Coolant device - MONFORTS CONTROL - Chip conveyor - Central lubrication - 3-jaw chuck Ø350 mm - rotating + stationary steady rest - rotating center point - operating instructions
Niederlangen, Germany
1997 MONFORTS KNC 8S
- Manufacturer: Monforts
- Model: KNC 8
Cycle lathe Machine overhauled in 2010 Operation via control panel Thread cutting by calculation Interpolator of NC control Chip conveyor manufacturer Cable drag Three-jaw chuck D=500mm without clamping jaws Vari...
Leipzig, Germany
2001 MONFORTS KNC 5 1000 #1052-04072
- Manufacturer: Monforts
- Model: KNC 5
- Spindle bore: 70 millimeter
Accessories 3-jaw chuck ROTA-S plus 250 mmø, 4 pos. toolholder PARAT, coolant
Bühl, Germany
Monforts KNC 8 CNC Lathe
- Manufacturer: Monforts
- Model: KNC 8
Good condition Monforts KNC 8 CNC Lathes available between 1995 and 2005 years. Located in Germany and other countries. Click request price for more information.
Germany
Tip: Enter manufacturer, model or keyword
