- Trusted Seller
Monarch 20" x 96" Toolroom Lathe Series 60
- Manufacturer: Monarch
- Model: SERIES 60
Equipped with: 3 jaw chuck w/reversible jaws 4 way tool post Large capacity roller type steady rest Newall 2 axis DRO *Feeds are in millimeters* **Machine is USA built but shipped to Germany**
- Trusted Seller
Steady Rest - Monarch Lathe
- Manufacturer: Monarch
for Approx. 26" Swing lathe, 8.5" Hole, 12" Wide at base
Hugo, MN - Trusted Seller
Steady Rest - Monarch Lathe
- Manufacturer: Monarch
Approx. swing 29", 6" Hole size, 12" Wide across base, 10.5" From top of V to far side of flat, 3 Available, One roller type other brass tips
Hugo, MN - Trusted SellerAuction
1954 Monarch Lathe with 22.5in Swing
- Manufacturer: Monarch
This is a 1954 Monarch lathe equipped with a 22.5-inch swing. Manufactured by The Monarch Machine Tool Company, the unit features clearly marked feed and threading specifications on its mounted informational plat...
Jacksonville, FLVisit Auction Website Monarch 18" lathe 18"BB 120"
- Manufacturer: Monarch
Nice lathe from local shop that closed down. Come check it out.
- Trusted Seller
Monarch 22M Geared Head Engine Lathe 22” Swing 48” Centers 10HP 3PH
- Manufacturer: Monarch
- Phase type: Three-phase
“IN GOOD CONDITION.” Monarch 22M Geared Head Engine Lathe 22” Swing 48” Centers 10HP 3PH Monarch 22M Geared Head Engine Lathe 22” Swing 48” Centers 10HP 3PH The Monarch 22M Lathe is a heavy-duty geared head engin...
- Trusted Seller
17"x60" Monarch Engine Lathe, 4-Jack Chuck, Tool Post, S/N 13562 ($10,500 OBO)
- Manufacturer: Monarch
“Used, very good condition; REFURBISHED 2025.” 17"x60" Table Size 4-jaw chuck Tool post S/N 13562 Swing: 17 inches over the bed Distance between centers: 60 inches Local deliveries available, simply message us be...
- Trusted Seller
18.5" x 78" MONARCH "TOOLMAKERS 60" ENGINE LATHE W/DIGITAL READOUTS - (2) CHUCKS - (3) STEADY RESTS
- Manufacturer: Monarch
- Model: 60
- Spindle bore: 39.62 mm
18.5" x 78" MONARCH "TOOLMAKERS" ENGINE LATHE w/DRO Imperial Metric Serial No 36486, Series 60 Toolmakers EQUIPPED WITH: C80 Newall 2-Axis Digital Readouts 16" 6-Jaw Chuck w/Jaws 12" 3-Jaw Chuck (3) Steady Rests ...
$4,950 USDCincinnati, OH Monarch Lathe Steady Rest 20” Swing 4" Capacity Steady Rest
- Manufacturer: Monarch
Monarch Lathe Steady Rest 20” Swing 4" Capacity Steady Rest I believe this steady rest is for a Monarch lathe. I have tried to take pictures and dimensions of the steady rest to determine if it will in fact fit y...
$800 USDLenapah, OKMonarch Lathe Steady Rest 22” Swing 4" Capacity Roller Steady Rest
- Manufacturer: Monarch
Monarch Lathe Steady Rest 22” Swing 4" Capacity Roller Steady Rest. I believe this steady rest is for a Monarch lathe. I have tried to take pictures and dimensions of the steady rest to determine if it will in fa...
$800 USDLenapah, OKMonarch Lathe Steady Rest 22” Swing 5" Capacity Steady Rest NON ROLLER
- Manufacturer: Monarch
Stantec Sales & Services is Offering the Following Equipment: Monarch Lathe Steady Rest 22” Swing 5" Capacity Steady Rest NON ROLLER All products are as is. No warranties expressed or implied and I expressly disc...
$1,000 USDLenapah, OKMonarch Chucker Lathe Threading Tool Over Spindle Attachment ???
- Manufacturer: Monarch
Stantec Sales & Services is Offering the Following Equipment: Monarch Chucker Lathe Threading Tool Over Spindle Attachment ??? All products are as is. No warranties expressed or implied and I expressly disclaims ...
$750 USDLenapah, OK
1961 Monarch 18 X 30
- Manufacturer: Monarch
- Spindle bore: 38.1 mm
Engine Lathe Swing over ways: 18.5" | Swing over cross slide: 11" | Distance between centers: 30" | Spindle hole: 1.5" | Spindle speeds: 24 - 1,028 RPM | Threading range: 2 - 120 TPI
Town of Rockingham, VT
1953 Monarch 20X120
- Manufacturer: Monarch
Manual Engine Lathe -EQUIPPED WITH- Tailstock Threading Taper Attachment
Town of Rockingham, VT
Monarch 60T
- Manufacturer: Monarch
Lathe diameter: 1500mm | Gap depth: 374mm | The spider doll is movable: 300mm | Spindle speed: 10-505rpm | Engine: 20hp | Length: 3200mm | Width: 3000mm | Height: 2000mm | Weight: 9000kg
Värnamo, Sweden
Tip: Enter manufacturer, model or keyword
