Used controllers in Wallonia, Belgium

Hydraulic core shooter, VOGEL & SCHEMMANN, 10 l

• Manufacturer: Vogel

Type: KSM61000-CO2, serial number: 4396, Com. number: 19.355Year of construction: 1991 Control PLC Siemens S5 With cabin and gassing unit Hydraulic movement With hydraulic unit With vacuum clamping The machine ca...

NEW gassing units LÜBER LW-FDA 425

• Model: LW-FDA 415

With heating 4 kW Max core weight 15 kg (± 10 l) With contactor control With stainless feeder tank 30 l Compressed air connector 1" With micro pump, gasdosing by rotameter Compressed air regulation by proportiona...

Frequency converter LOHER, 10 KVA 200 V. 300 HZ.

• Manufacturer: Loher

Motor: type: SN60M-2G, 8,5 kW, 2915 rpm, exit 220/380 V, 31/18 A Converter type DCG1610, 10 KVA, 200 V, 300 Hz Exit 220/380 V, 24/14,without control box

1991 Furan sand mixing plant WÖHR, double arm, 15t/h

• Manufacturer: Wöhr

Jib lenght 5200mm; (3200+2000mm) Live rings with pneumatic brake With 3 storage tanks 1 for resin 2 for hardener with catch basin, With dust collector KELLER With control board SIEMENS S5-100U With sand hoper ±6t

2024 Small round coating basin ±80l MJS

• Manufacturer: MJS

External dimensions: length: 750mm; width: 540mm, height: 1100mm Useful dimensions: Ø470mm; depth: 570mm Capacity ±80 litres For water sizing With 1 agitator; 0.75 kW Frequency-controlled, Speed adjustable by kno...

Double floor type grinder DÜRRSCHMIDT/VITEX, 760 mm, 50m/s

Motor CEM, Type: MJPP180MN4, serial number: L617626, 22 kW, 220/380 V, 1450 rpm Driving by beltsstone max 760 mm, stone width 60 mm Speed 50/s Files plates 260x90 mm (2x) With control cabinet

2019 Small round coating basin ±80l MJS

• Manufacturer: MJS

External dimensions: length: 750mm; width: 540mm, height: 1100mm Useful dimensions: Ø470mm; depth: 570mm Capacity ±80 litres For water sizing With 1 agitator; 0.75 kW Frequency-controlled, Speed adjustable by kno...

2024 Small round coating basin ±80l MJS

• Manufacturer: MJS

External dimensions: length: 750mm; width: 540mm, height: 1100mm Useful dimensions: Ø470mm; depth: 570mm Capacity ±80 litres For water sizing With 1 agitator; 0.75 kW Frequency-controlled, Speed adjustable by kno...

Transport screw, 4500 mm, Ø ± 300 mm

External dimensions: length 4650 mm, width 680 mm, height 540 mm Engine: 2,2 kW, 380 V, brand BAUER, type drive engine, 1420/57 rpm Outlet Ø 160 mm With control door With double chaine drive

Lining spraying unit SAS 3

Type : III E7, serial number: 3190 With loading container, hand slide valve for lift track and long flex pipe Filling hole wicht pneumatic clap Spraying system over screw With motor and frequency converter On 3 w...

2019 Small round coating basin ±80l MJS

• Manufacturer: MJS

External dimensions: length: 750mm; width: 540mm, height: 1100mm Useful dimensions: Ø470mm; depth: 570mm Capacity ±80 litres For water sizing With 1 agitator; 0.75 kW Frequency-controlled, Speed adjustable by kno...

Mobile continuous mixer WÖHR, 20 - 40 t/h

Mixer length: 8.300 mm (first arm: 5.300 mm, mixer arm: 2500 mm) 2 pumps for furan sand Flow control (Endress & Hauser) Mobile on 1 rail on the ground and fixed on a side of building With loading belt, length 50 ...

2002 Gravity die casting machine IMR C60X

• Manufacturer: IMR

Dimensions: Length: 3150mm; Width: 2500mm; Height: 1960mm 6KW; 400V; 50Hz Max opening of clamping plates: 700mm, side stroke: 335mm Hydraulic tank: 200l, max pressure: 60bar With 2 split dip tanks With light barr...

Screw mixer for core sand 6t/h REISAUS-BAUMBERG

• Manufacturer: REISAUS-BAUMBERG

5,5kW, 400V 50Hz Dimensions: Lenght: 2830mm; With hopper and filling level sensor (3 dosages possible) With 2 screw for additiv With 2 acid pumps With control board PLC SIEMENS S7 Mixer is swivelling by hand Mixe...

1987 Hydraulic core shooter VOGEL & SCHEMMANN, 15 l

• Manufacturer: Vogel

Type: KSM61500 CB/0C02, serial number: 4323, Com. number: 18.828 In good condition Completely equipped in cold box, with cabin, automatic control, all the movements are hydraulic Max dimensions of core boxes: hei...