2019 Makino U3 Wire EDM
- Manufacturer: Makino
- Model: U3
0.05 Micron Scale Feedback (X,Y), Automatic Wire Threading Unit, Dielectric Fluid Height Setting Function, PICO Precision Guide System The 2019 Makino U3 Wire EDM is designed for manufacturers who value precision...
Schaumburg, IL- Trusted Seller
2012 INDUCTOTHERM VIP POWER TRAK
- Manufacturer: Inductotherm
Inductotherm VIP Power Trak, 75 KW, 3200 HZ, 100 Lift Swing.
Ohio, USA 
2005 MITSUBISHI EDM FA10S
- Manufacturer: Mitsubishi
- Model: FA10S
X: 13.8 in | Y: 9.8 in | Z: 8.6 in | Max. workpiece dimensions: 31.4 x 23.6 x 8.4" | Max. workpiece weight: 1100 Lbs. | Auto threading (yes/no): Yes | Submerged (yes/no): Yes | Taper angle: 15.0 | Taper height: ...
Oak Park, IL
2003 MITSUBISHI EDM FA10M
- Manufacturer: Mitsubishi
- Model: FA10M
X: 13.7 in | Y: 9.8 in | Z: 8.6 in | Max. workpiece dimensions: 31.4 x 23.6 x 8.4" | Max. workpiece weight: 1100 Lbs. | Auto threading (yes/no): Yes | Submerged (yes/no): Yes | Taper angle: 15.0 | Taper height: ...
Oak Park, IL- Trusted Seller
MAKINO SP-43 #0236625
- Manufacturer: Makino
- Model: SP43
TRAVELS: MACHINE HOURS: Year of manufacturer: 2004 | X axis: 18" | Y axis: 22" | Z axis: 12.6" | Table size: 28.5" X 23" | Control: MGW-S | Power on: 29,978 | Auto run time: 19,304 | Machining time: 17,986
Toledo, OH - Trusted Seller
Como Filtration 210 Portable Filter Cart Hydraulic 11GPM 120V 3/4 Hp EDM
- Manufacturer: Como Filtration
Used, in Good Working Condition, Tested OK. Specs show this if for an EDM. Designed for EDM fluids. Each tank is rated for 20 pounds of dirt and 1 gallon of water. 3/4Hp Leeson Motor. 120V single phase. 60 PSI 11...
$4,275 USDMillersburg, IN - Trusted Seller
1996 CHARMILLES Roboform 30 #0150024
- Manufacturer: Agie - Charmilles
- Model: Roboform 30
-Some Tooling Included -Graphite Blanks Included Mfg: Charmilles | Yom: 1996 | Table size: 15.5" x 19.6", | X-axis: 13.7" | Y-axis: 9.8", | Z-axis: 11.9", | Max workpiece size: 31.8" x 20.4" x 13.3", | Max workpi...
Toledo, OH 
2021 EDM DRILLMATE 22I
- Manufacturer: EDM DRILLMATE
Equipped with: 12 station electrode changer | Hole-dia. (min): 0.008 in | Hole-dia. (max): 0.118 in | X: 16.0 in | Y: 12.0 in | Z: 19.0 in | Work-w: 21.5 in | Work-l: 14.0 in | Cnc controlled: Yes
Oak Park, IL
2022 MITSUBISHI EDM SV12P
- Manufacturer: Mitsubishi
X: 15.7 in | Y: 11.8 in | Z: 11.8 in | Table size-w: 19.7 in | Table size-l: 27.5 in | Worktank inside dimensions: 37.4 x 27.5 x 17.7 | Max. workpiece dimensions: 35.4 x 25.6 x 13.8 | Max. workpiece weight: 2200...
Oak Park, IL
2014 MITSUBISHI EDM EA8S
- Manufacturer: Mitsubishi
- Model: EA8S
X: 11.8 in | Y: 9.8 in | Z: 9.8 in | Table size-w: 13.8 in | Table size-l: 19.7 in | Worktank inside dimensions: 31.5 x 20.5 x 11.8" | Max. workpiece dimensions: 30.3 x 19.3 x 7.9" | Max. workpiece weight: 1210 ...
Oak Park, IL2001 MITSUBISHI EDM FA20
- Manufacturer: Mitsubishi
- Model: FA20
X: 19.6 in | Y: 13.8 in | Z: 11.8 in | Max. workpiece dimensions: 31.5 x 23.6 x 8.5" | Max. workpiece weight: 1760 Lbs. | Auto threading (yes/no): Yes | Submerged (yes/no): Yes | Taper angle: 15.0 | Taper height...
Oak Park, IL
Elox 8-2012 Sinker EDM Machine
Specifications*: SPEC Below for Elox 8-2012DR, should be similar, buyer should verify before purchase EXPECT FINISHES OF 125 Ra AND TOLERANCES OF +/-0.003″ 280 VOLT – 60 AMP Stroke – 8″ Plate Size – 9″ x 9″ Open ...
Posen, IL
2003 MITSUBISHI EDM FA20
- Manufacturer: Mitsubishi
- Model: FA20
Equipped with: - Tooling shown on table not included. | X: 19.6 in | Y: 13.8 in | Z: 11.8 in | Max. workpiece dimensions: 31.5 x 23.6 x 8.5" | Max. workpiece weight: 1760 Lbs. | Auto threading (yes/no): Yes | Su...
Oak Park, IL
1997 MITSUBISHI EDM EX8
- Manufacturer: Mitsubishi
- Model: EX8
Equipped with: * Price includes a second functional EX8 that is plain that can be kept on hand for parts. | X: 11.8 in | Y: 9.8 in | Z: 9.8 in | Table size-w: 20.0 in | Table size-l: 14.0 in | Worktank inside di...
Oak Park, IL- Trusted Seller
NEC EHV-163-238670 Power Supply Circuit Board Unit Makino EDM CNC
- Manufacturer: NEC
Used, In Working Condition. Removed From a Working Environment. *Dusty From Storage* One Ceramic Insulator Missing Between Shunt on Back End. If this item ships as Flat Rate Freight please see details in Shippin...
$840 USDMillersburg, IN 
Makino EDNC207 EDM machine
- Manufacturer: Makino
- Model: EDNC207
Good condition Makino EDNC207 EDM machines manufactured in 1997. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword
