Used exchangers in Japan

Multitubular heat exchanger

Heat transfer area: 10m2 Material: Wetted parts SUS316 | Quantity saved: One

Multitubular heat exchanger

2 passes. Since there is no documentation, the heat transfer area cannot be determined without removing the mirror and investigating the diameter x number x length of tubes.

Multitubular heat exchanger

Heat transfer area: Under investigation (10m2?) Material: Wetted part SUS | Quantity saved: One

Multi-tube heat exchanger, vertical type

Heat transfer area: 4.7 m2 Tube: inner diameter 30mm, length 1240mm Number of tubes: 40 tubes, 400φ, single mirror SUS Heat transfer area: 4.7 m2

［Carbon multi-tube heat exchanger (vertical type)

Heat transfer area: 4.9 m2 Tube: inner diameter 25 mm, length 2000 mm Number of tubes: 31 1-pass specification Heat transfer area: 4.9 m2

2003 [Maeda Iron Works] Multi-tube heat exchanger

• Manufacturer: Maeda

This heat exchanger cools and condenses vapor generated by a vacuum concentrator (3000-4000 kg/hour evaporation rate). External dimensions: Approx. 1000mm diameter (excluding legs) x 4200mm high, Weight: Approx. ...

SEC FK-22-10

• Manufacturer: SEC

Cubic type Heat transfer area: 1.53m2 Design pressure: 2kg/cm2G

2008 Izumi Food Machinery NPW30F06-042-6-H type

• Manufacturer: Izumi

Tubes in shell-and-tube heat exchanger replaced by All welded plate & tube heat exchangers Shell and tube heat exchanger Material is under investigation

1991 Carbon capacitor

Heat resistance temperature: 360°C Withstand pressure: 0.5MPa(75PSIG) Heat Transfer Area: Unknown (Approx. 10㎡ based on size)

［Carbon capacitor No model

Heat transfer area: Unknown (about 10 square meters based on the size). Other: Unknown (because there is no nameplate).

SSC RC456SK-42-9

• Manufacturer: SEC

Cubic type Heat transfer area: 1.12 m2 Material: carbon | Quantity saved: One

1990 Izumi Food Machinery W-4800-KS-R

• Manufacturer: Izumi

14.75 m2, CLASS-NO.: APKO390 Heat transfer area: 14.75 m2 Capacity: 4800 l/h

2003 LX-025A-TNHJR-6, Hisaka Mfg.

• Manufacturer: Hisaka

Heat transfer area: 0.5 m2. Maximum operating temperature: 144°C on A side and B side. Confidential test has been conducted. Click here to see a video of the test run (YouTube) upon completion of the maintenance.

1985 [Hisaka Manufacturing] Spiral condenser No model

• Manufacturer: Hisaka

Vortex type, design temperature: 50°C Heat transfer area 8㎡ Plate material: SUS317L

2011 Izumi Environmental Engineering Vertical

• Manufacturer: Izumi

Tube: 25.4φ (2t) x 3000L x 165 tubes (SUS304) Body plate: 500φ (SGP-E)