Used Minster Presses in Connecticut, USA

250 Ton, Minster, 90-250-9058 Minster Knuckle Press

• Manufacturer: Minster
• Model: 90-250

MINSTER KNUCKLE PRESS 250 Ton Model 90-250 3" Stroke of Slide 1/2" Adjustment of Slide Shut Height 9-1/8" over 3-1/2" Bolster (bolster not with press) Bed 34-1/2" deep x 24" Distance between uprights 25" Opening ...

Minster S2-300-60-54 Stamping Press And Feed Line 16" Stroke 300Ton

• Manufacturer: Minster
• Model: S2-300
• Capacity: 300 kg
• Stroke length: 406.4 mm

Straight Side Stamping Press Comes with Complete Feed line - Decoiler and Straightener. Twin End Bull Gear Drives Anti vibration isolation feet Specifications Subject to buyers verification: -Shut Height: Bolster...

Minster Piecemaker P2-60-36 Stamping Press w 2" Stroke 14" SDAU CWP Servo

• Manufacturer: Minster
• Model: P2-60
• Capacity: 60,000 kg
• Stroke length: 101.6 mm

Minster Piecemaker P2-60 Straight Side Precision Stamping Press with 2" Stroke - Mint Condition!* Later model Piecemaker press. Bought new by seller. * Speed range 125 - 375 SPM* 2" stroke* SDAU - 14" * 3" Adjus...

Minster P2-60-36 Straight Side Stamping Press W/3" Stroke & 7-10" Shut Height

• Manufacturer: Minster
• Model: P2-60
• Capacity: 60,000 kg
• Stroke length: 101.6 mm

Minster P2-60-36 Straight Side Stamping Press W/3" Stroke & 7-10" Shut Height Shipped from Minster 3/31/1969 strokes per minute 240. 3" Stroke Antivibration Rubber Feet Ross Minster Dual Solenoid Safety Pneumatic...

Minster Pulsar TR2-30 High Speed Press 1983, Clean

• Manufacturer: Minster
• Model: PULSAR TR2-30
• Capacity: 30 kg
• Stroke length: 31.75 mm

Smartpac Wintress Press Automation Center Minster Clutch Control #25335 Straight Side Double Crank

Minster B1-32 Fixed Base Stamping Press 32Ton 1.5" Stroke

• Manufacturer: Minster
• Model: B1-32

1.5" Stroke 32 Tonnage Fixed Base Stamping Press Machine Steward Model 16 Processing Unit 16 Position Probe Box Minster Clutch Control 208/3/60 (Volts/phase/Frequency) 8.3 Amps Comes With Prints and Other Papers ...

Minster B1-60 2" Stroke Fixed Base Stamping Press 60Ton See Description

• Manufacturer: Minster
• Model: B1-60
• Capacity: 60,000 kg
• Stroke length: 50.8 mm

60 Ton Fixed Base Stamping Press 2" Stroke Newer Baldor Standard E Electric Motor - Machine Steward 24AD Processing Unit 16 Position Probe Box Minster Clutch Control 208/3/60 (Volts/Phase/Frequency) - 6.08Amps Se...

NIDEC MINSTER B1-32 Stamping Press 1.5" Stroke w Newer Controls

• Manufacturer: Minster
• Model: B1-32
• Stroke length: 38.1 mm

Minster B1-32 Stamping Press OBI with Excellent Modern Controls * 1.5" Stroke * ISB 24" Light Curtains * Wintriss DiPro 1500 Press Controls and Die Protection * Wintriss WPC 2000 Clutch / Brake Monitor / Controll...

Minster B1-22 Stamping Press 22 Tons, Fixed Base Vamco VAMMK3 Feeder

• Manufacturer: Minster
• Model: B1-22

Fixed Base Variable Stroke Stamping Press 22 Tonnage 20"x12" Bed Vamco VAM Mark 3 Feeder Comes With Prints For Electrical ect. Updated Control Board (1997) 16 Station Probe Minster Oil Pump System Machine Steward...

Minster P2-60-36 Piecemaker Straight Side Press 2" Stroke Littell Push Pull Feed

• Manufacturer: Minster
• Model: P2-60
• Capacity: 60,000 kg
• Stroke length: 76.2 mm

Minster Piecemaker P2-60-36 Straight Side Precision Stamping Press with 2" Stroke - Mint Condition!* Later model Piecemaker press. Bought new by seller. * Speed range 125 - 250 SPM* 2" stroke* SDAU - 13.5" * Shu...

22 Ton, Minster B1-22, 1 1/2"Str, B1-22 Minster S/N 21479 1-1/2" stroke 2" adjust 400-800 SPM Air Clutch/Brake

• Manufacturer: Minster
• Model: B1-22

MINSTER OBI PRESS Model B1-22 1-1/2” Stroke 2” Slide Adjustment 9-3/4” Shut Height over bed 2” Bolster Plate with 5/8” T-Slots (5” x 10-1/2” angled cut out) Bolster plate extends beyond bed. 10” riser blocks betw...

60 Ton, Minster, Minster P2-60 36" bed 2" stroke 0-250 SPM

• Manufacturer: Minster
• Model: P2-60
• Shut height: 457.2 mm

60 Ton, Minster, Minster P2-60-32 60 Ton 2" stroke 3" Ram Adjust

• Manufacturer: Minster
• Model: P2-60
• Shut height: 457.2 mm

MINSTER SSDC PRESS Model P2-60-32 2" Stroke 3" Ram Adjustment 3-1/2” Bolster Plate 12” Windows Trabon Lube System Rebuilt in 1997

60 Ton, Minster, Minster P2-60 42" Bed 2" Stroke 22" Shut Height 0-250 SPM

• Manufacturer: Minster
• Model: P2-60
• Shut height: 457.2 mm

MINSTER SSDC PRESS Model P2-60-42 2” Stroke 22” Shut Height 3” Adjustment 21.75” x 25” Bolster 0-250 SPM Eddy Current Motor

Minster 90-250 Press

• Manufacturer: Minster
• Model: 90-250

Good condition Minster 90-250 Presses. Located in USA and other countries. Click request price for more information.