Used Horizontal Grinders

Peterson Pacific 4710B Horizontal Grinder

• Manufacturer: Peterson
• Model: 4710B

Reman CAT, 765 Hp engine – certified by CAT 531 engine hours; 6,731 frame hours New twin disc clutch installed when reman engine was installed Charge air cooler & new radiator installed at 280 hours on reman engi...

2007 Morbark 6600T Horizontal Grinder

• Manufacturer: Morbark
• Model: 6600

CAT 3412, 1,000 Hp engine 4,471 hours PT tech clutch with new element Magnet Long belt conveyor 4″ screens

2017 CBI 5800BT Horizontal Grinder

CAT C18, 765 Hp engine – NON-DEF Approx 800 original hours Magnet 48″ wide infeed Remote control Reversing fan Demo screens Ready to work!

2005 Diamond Z 7000 Horizontal Grinder

• Manufacturer: Diamond Z

Rebuilt CAT 3412E 1000 Hp engine Approximately 8,725 hours Replaced phase I and II conveyors with new units from manufacturer Replaced Fluid Coupler Replaced Feed Roller Replaced Feed Roller bearings Replaced Mil...

1995 CBI 4860 Roadmill Horizontal Grinder

CAT 3412 800 Hp engine 6,750 hours

2014 Vermeer HG4000 Horizontal Grinder

• Manufacturer: Vermeer
• Model: HG4000

CAT 530 Hp engine Approx 3370 hours 60″x30″ opening; Dual axle Municipality owned

2018 Rotochopper MP2 Horizontal Grinder

• Manufacturer: Rotochopper

Diesel 275 Hp engine Only 700 original hours! PT Tech Hydraulic clutch; Magnet On-board Colorizer; Extra screens 56″x18″ infeed; Pintle hitch; Dual Axle Used to grind chips Ready to work!

2006 Diamond Z 5000 Horizontal Grinder

• Manufacturer: Diamond Z

CAT 3412 1000 Hp engine Approximately 9,750 hours Trans fluid coupler Magnetic head pulley Remote Rod puller Air compressor New converter installed at 4,600 hours Engine harness and turbos in 2020 Newer chain and...

2023 Diamond Z 6000TK Horizontal Grinder

• Manufacturer: Diamond Z

CAT C27, 1050 Hp engine, tier 4 Less than 1,000 hours Fluid coupling mill drive 63″ x 52″ mill opening Up to 524 YPH, per manufacturer Remote Reversing fan Toolbox Engine cover No transporter included

2006 Vermeer HG 6000 Wood Horizontal Grinder

• Manufacturer: Vermeer
• Model: HG6000

CAT C16, 630 Hp engine Approx. 6200 hours PT Tech clutch Magnet Remote 1 1/4″, 3″, and 6″ screens Regular maintenance – ready to work! List of replacement parts over the last 5 years is available upon request

2018 Peterson Pacific 4710B Horizontal Track Grinder

• Manufacturer: Peterson
• Model: 4710B

CAT C18, 765 Hp engine 4753 hours Remote Air compressor, Toolbox 8″ Hex screens Consistent maintenance – ready to work!

2006 Morbark 6600T Track Horizontal Wood Grinder

• Manufacturer: Morbark
• Model: 6600

CAT 3412, 1000 Hp engine 7729 hours Twin Disc Hydraulic Clutch 4″ screens Undercarriage in good condition

2015 Diamond Z 6000 TKT Horizontal Track Grinder

• Manufacturer: Diamond Z

CAT C27 engine 1050 Hp (just had 3 new injectors and an overhead run on it) Approximately 5,200 hours Twin Disc Clutch Transporter included New mill bearing Rear conveyor drive coupler Remote control Replaced flo...

Bandit Beast 2680 Horizontal Grinder

• Manufacturer: Bandit
• Model: Beast 2680

Good condition Bandit Beast 2680 Horizontal Grinders manufactured in 2017. Located in USA and other countries. Click request price for more information.