Used operations

Eimco Disc Filter Skid-Mounted Operating Module

• Manufacturer: Eimco

Consisting of: Eimco 4ft Diameter, 4-Section Disc Filter with Rotary Valve Comes with a Reeves Vari-Speed Controller Driven by a 1HP Gearhead Motor 18in Dia. x 7ft High Filtrate Tank Sutorbuilt Rotary Lobe Blower...

Hy-G 30 inch Centrifugal Mineral Concentrator

• Manufacturer: Hy-G

Approximate Specifications Based on Model Year: Outlet Tailing Pipe 8" diameter with Victaulic groove 480 volt 3 phase 60 Hz Tails Lining Abrasion Resistant alloy steel

26in IRD Pan American Duplex Mineral Jig

• Manufacturer: I.R.D Inc.

Max Capacity: Average Hutch Water Required: Average Length of Stroke: Average RPM Eccentric Shaft: Overall Dimensions:

Schiller 0-756305 Hydrophonic Disc Filter Luer Lock

• Manufacturer: Schiller

The Schiller Americas, Inc. 0-756305 Hydrophonic Disc Filter, Luer Lock, Female to Male, is a high-quality medical device designed for use in various healthcare settings, including hospitals, clinics, and laborat...

Knelson KC-CD12MS Concentrator

• Manufacturer: Knelson

Complete With: SH12 Screen Hopper Water Filter Spare Parts All Operator’s Manuals General Model Specifications: Max Total Volumetric Throughput: 120 US GPM (27m³/hr.) Feed Size: Typical Cycle Duration:

KPI-JCI 8ft x 20ft 3-Deck Wash Plant

• Manufacturer: Kpi-Jci

All Decks Angled at 20° First 4ft, 10° next 4ft and Horizontal for the Remaining 10in Water Manifold and Valves 480 Volt Power Requirement Step-Down Transformer 120/240V With Panel and Plugs Lights have Plug-Ins ...

88 in. x 28 ft. ALmix Portable Parallel Flow Drum

• Manufacturer: ALmix

-88” diameter x 28’ long shell -Parallel Flow with Center Entry RAP Collar -Slinger Belt type feeder with 5HP Drive -Four(4)heavy duty 25HP Trunnion Drives -Hauck SJO4520 burner with 100 HP Blower, currently oper...

12 x 10 Warman 12/10 AH Slurry Pumps

• Manufacturer: Warman

Used 12 x 10 Warman Slurry Pumps -As is; reported to be in good condition -Ready to inspect or ship -Model 10 AH -Suction: 12″ -Discharge: 10″ -Metal lined -Motor Available Seperately -Cast pump housings -Suitab...

Wemco 164 Flotation Mechanisms

• Manufacturer: Wemco

Wemco model 164 Flotation Mechanisms - For 1,000 cubic foot square tank - Rubber wear parts - Removed and in storage - Operates with 100 HP motor (used, included) - 3 units available - Offered as is - EX works st...

88 in. x 28 ft. Cedarapids Portable Counterflow Dryer

• Manufacturer: Cedarapids

-Nominal 88” x 28’ shell -Reported in good condition -50 HP Cradle Chain Drive with a heavy-duty Concentric Shaft type gear reducer -Right Hand Discharge (from burner end) -Maxon Type 592 Burner -Genco Genie Semi...

20 x 10 ft (6.1 x 3.05 m) ANI FLSmidth SAG Mill with 2,500 HP

• Manufacturer: FLSmidth

- 20 ft diameter by 10 ft shell (6.1 x 3.05 meter) - Manufactured by ANI/FLS - Includes WEG 2,500 HP motor - Enclosed gear drive made by David Brown - Inching drive - Mill is currently operational and installed -...

21 x 11 ft Hardinge SAG mill with 2,875 HP

• Manufacturer: Hardinge

21 x 11 ft Hardinge SAG mill with 2,875 HP - Mill is currently removed and in storage - Without liners or bolt package - Nuttall gear reducer - McLellan liner handler available separately - Spare motor available...

Denver-style Flotation Mechanisms

Drop-in interchangeable replacement mechanisms (agitators) for Denver flotation cells - Fits corresponding Denver model numbers ( table here ) - Identical in construction and performance to original Denver equipm...

New Unused Krebs style Cyclones Made to Order

- New and unused cyclones made to order in Krebs and Denver styles - Fully assembled - Interior covered with 1/4 inch thick vulcanized rubber - Victaulic connections for feed and discharge - Variety of Apex and I...

New Denver-style Sub-A flotation cell mechanisms

- Drop-in replacement of Denver Sub-A flotation mechanism - Complete mechanism with rubber coated standpipe and wear parts - Interchangeable with original Denver Equipment Company mechanisms - Made in North Ameri...