Used processing machines

20 x 10 ft (6.1 x 3.05 m) ANI FLSmidth SAG Mill with 2,500 HP

• Manufacturer: FLSmidth

- 20 ft diameter by 10 ft shell (6.1 x 3.05 meter) - Manufactured by ANI/FLS - Includes WEG 2,500 HP motor - Enclosed gear drive made by David Brown - Inching drive - Mill is currently operational and installed -...

36 x 17 ft (11x5m) Unused FLS SAG Mill with 18,350 HP (13,5009 kW)

- Unused surplus FLS Fuller-Traylor SAG mill - ABB brand 13,500 kW (18,350 HP) drive - Wrap around style drive motor - Braking system - Complete liner package - Feed chute - Hydraulic jacking system - Specialty t...

32 x 12 ft (9.8 x 3.6 m) Hardinge Koppers ( Metso) SAG Mill 6800 HP

• Manufacturer: Hardinge

32 x 12 ft (9.8 x 3.7 m) Hardinge Koppers SAG Mill 6800 HP (5100 kW) Two GE wound rotor induction motors: - 3400 HP - 710 RPM - 4000 V - Includes motor starter. - Includes lube system and temperature sensors. - F...

18 x 30 ft (5.5 x 9.1 m) Outotec SAG Mill with 6300 HP (4697 kW) motor

• Manufacturer: Larox

18 x 30 ft ( 5.5 x 9.15 m) Outotec SAG Mill with 6032 HP (4500 kW) motor: - Unused surplus. - Made in 2013. - Includes: Lube system, feed chute, trommel, instrumentation, inching drive, and mill liners. Enclosure...

6x12 ft Allis Chalmers rod mill

• Manufacturer: Allis-Chalmers

Allis Chalmers 6x12 ft. Rod Mill Allis Chalmers 300 HP slip ring motor Used PCV

FLSmidth Krebs RM250 millMAX Slurry Pump

• Manufacturer: FLSmidth

FLSmidth Krebs RM250 millMAX Slurry Pump -Rebuilt pump in good condition - Bare pump - Stored indoors - Immediately available millMAX Design which includes: -Increased wear life -Lower power consumption -Increas...

Galigher-style Vacseal Pump

• Manufacturer: Galigher

- Galigher style pump interchangeable with original brand Galigher Vacseal pump - New manufacture made in North America - 520 natural rubber wear parts and liner - Supplied with one coat primer and two coats mach...

300 TPD Dry Grinding Circuit

- 300 HP dry grinding circuit - 12 TPH throughput - 300 TPD Production - Consists of sizer, screen, ball mill, classifier, and baghouse British Rema Ball Mill: - 2.5m x 3.8 m ( 8.2 x 12.5 ft) - Steel liners - E...

4,500 HP (3,355 kW) Louis Allis Motor; 1,785 RPM

• Manufacturer: Louis Allis

LOUIS ALLIS Armor Line 4,500 HP (3,355 kW) Motor: - 1785 RPM - 3 Ph - 60 Hz - 7411Z Frame - Type WPIIX - 4000 Volts - 556 Amps - Code E insulation - S.F. 1.0 - Continuous duty.

Unused acid duty Prominent Diaphragm Dosing Pumps

• Manufacturer: Prominent

Unused Prominent Diaphragm Dosing Pumps - Prominent Model M5HaD 0065110 PC TT 10B 50000 – Acid Duty (Qty 2) - Duplex, motor driven, hydraulically actuated diaphragm dosing pump - PTFE faced EPDM diaphragm - Mount...

10 x 10 in Linatex Slurry Pumps

• Manufacturer: Linatex

10x10 Linatex Slurry Pumps - Rebuilt ball mill feed pumps, rubber lined, 36" 4-belt pump sheaves

Weir Model 6X500CVX10 Cyclone Cluster

• Manufacturer: Weir

- Two cyclone clusters with manifold distributors - Weir brand model 6X500CVX10 - 10 per bank - 2 banks available - Used for ball mill discharge classification - Removal and loading additional

Equivalent in Performance with Type AH Horizontal Slurry Pumps

- Centrifugal seal - Cast casings and pedestal base - Equivalent to series AH pump - Liners are pressure molded vulcanized rubber - Impellers are rubber, polyurethane and steel are available - Fabricated over-sea...

New Galigher Style Series 1000 Vertical Pumps

• Manufacturer: Galigher

- Galigher Style pumps interchangeable with Series 1000 - Totally sealed bearings - Bottom box and top plate coated in vulcanized rubber - Semi-open impeller coated with abrasion-resistant polyurethane - 4140 ste...

5ft x 12ft MBMM Concentrating Tables

• Manufacturer: Mount Baker Mining and Metals (MBMM)

EPDM Table Tops with Machined Grooves Voltage: 120 Volt | Capacity: 4,000-4,500 Lbs./Hour | Drive: 1HP Electric Motor | Recovery: Up To 95% of the Gold to 325 Mesh (50 Microns) or Less