Used Mineral Processing in Canada

Conc jet pump system incl.: (5) 6 mm rubber lined hoppers

• Manufacturer: JET

Conc jet pump system incl.: (5) 6 mm rubber lined hoppers, (1) Eriez vibratory feeder, valves c/w (2) Warman centrifugal pumps, mod. 75WBH, 100 hp ea. (2nd Loc. Red Zone, Level M)

UV-IR infra-red/UV dryer

UV-IR infra-red/UV dryer, ser. no. 11070 (2015) w/ Eriez feeder, infeed and outfeed chutes c/w Kason vibratory separator, ser. no. M-1047, 1/3 hp

Warman sump-pump

• Manufacturer: Warman

Warman sump-pump, mod. V15F03, 20 hp c/w valves

Holman-Wilfley 8000SD Concentrating Table

• Manufacturer: Holman-Wilfley Ltd

Capacity: Up to 2,500 kgs/Hour (Particle Size Dependent) | Deck type: Single Deck | Deck area: 7.5m² | Deck size: 1,600mm x 4,900mm | Water supply requirements: 20 - 35L/min | Drive: Baldor Electric Motor | Powe...

Denver D-1 Lab Flotation Cell

• Manufacturer: Denver

Tachometer Not Installed Stainless Steel Wetted Parts (Urethane impeller and diffuser). Comes with 750mL Stainless Steel Tank

Denver No. 18 Special Flotation Cells

• Manufacturer: Denver

Manual Cell to Cell Flow Control Gate Naturally Aspirated Sealed Standpipe

Mill, Sag, 40' X 25', FL Smidth, 34,866 HP, Unused #D739644

• Manufacturer: FL Smidth

Unused FL Smidth SAG mill, 40' diameter x 25' length, designed for 34,866 HP (26,000 kW) wrap-around GMD motor (motor not included). No liners included.

Mill, Sag, 38' X 25'5", Metso, 26,016 HP, Unused #D739643

• Manufacturer: Metso

Unused Metso sag mill, 38' (11.58 m) diameter x 25' 5" (7.76 m) long, 26,016 HP (19,400 kw) Siemens wrap around drive motor-operating frequency 50/60 Hz. EGL: 22' (6.7 m), mill speed: 7.5-10.08 RPM. Maximum volum...

Mill, SAG, 32' x 12', Hardinge-Koppers, 6800 HP Dual Drive #D744636

• Manufacturer: Hardinge

32' x 12' SAG mill, manufactured by Hardinge-Koppers, driven by dual GE 3400 HP 4000 V, 60 Hz AC wound rotor induction motors, model 108770. Complete with trunnions, trunnion liners, girth gear, pinion assemblies...

Mill, Sag, 13'6" X 4', Marcy, No Motor, #D739647

• Manufacturer: Marcy

Marcy Dry Grind SAG Mill, 13' 6" Diameter x 4' Long. Includes bull gear, pinion gear, large Falk gearbox, air clutch, and lube set. No motor. Manufactured new in 1988.

(New) Hy-G HR16 Concentrator with Deep Bowl Technology

• Manufacturer: Hy-G Concentrators Inc.

Recovering free gold and other heavy metals and minerals in crushing, milling, or recycling circuits. Reprocessing crushed and milled tailings to remove gravity recoverable gold and other heavy metals and minerals.

Hy-G HR10 Centrifugal Gravity Concentrator – Hard Rock

• Manufacturer: ROCA

Applications: Recovering free gold and other heavy metals and minerals in crushing, milling, or recycling circuits Reprocessing crushed and milled tailings to remove gravity recoverable gold and other heavy metal...

Oro Industries 16in Dia. Reverse Spiral Concentrator

• Manufacturer: Oro Industries

GPM @ 20–40 PSI Water Hose Hook-Up External 1in Hose Barb Powder Coat Finish This is a Continuous or Batch Feed Secondary Concentrator for Processing Primary Sluice Concentrate, Primary Jig Concentrate, Centrifug...

150 Yard Wash Plant

Custom Built Three Deck Vibrating Screen Deck. ¼ inch Smallest Screen Includes 6ft Wide x 16ft Long Sluice Box With Miner's Moss Cat Generator Approx. 150-200 Gallon Fuel Tank Mounted on I-Beam Skids Contact Us f...

Denver No. 15 3-Cell Flotation Cells

• Manufacturer: Denver

Launder Trough Paddle Shaft Overall Dimensions: Bank: (3) Cells | Cell dimensions: 24in Long x 24in Wide x 36.5in Deep | Cell volume: 12ft³ | Drive: Electric Motor | Power output: 5HP | Rotation speed: 1740RPM | ...