Millutensil Oscillating mechanical shears
- Manufacturer: Millutensil
Rotating Hydraulic guillotine shears On request hydraulic guillotine shears type GI equipped with a “quick” electrohydraulic system can be supplied. This system allows high-speed shearing. SPECIFICATION
Milan, Italy
Millutensil Lub. for lateral lubrication
- Manufacturer: Millutensil
Lubricators with felt rollers for lateral lubrication LRFC 60 The oil is fed to the felt rollers from the inside-out, through the cavities. The upper roller regulation on the material occurs by means of pneumatic...
Milan, Italy
Millutensil Lines with laser technology
- Manufacturer: Millutensil
LINES WITH LASER UNIT FOR DISK PRODUCTION LINES WITH LASER UNIT FOR DISK PRODUCTION
Milan, Italy
Millutensil Rotating upper plate
- Manufacturer: Millutensil
Rotating upper plate For optimal access to the dies, the die splitter upper plate can be rotated forward by 180° on the short side and blocked by four hydraulic wedges. In this way, the operator can work at an op...
Milan, Italy
Millutensil AM 09 (3000x1470 mm)
- Manufacturer: Millutensil
The bigger model for medium size dies. The AM 09 is the first model with an hydraulic system controlled by electronic servo proportional valves and a control of parallelism. The control system includes measuremen...
Milan, Italy
Millutensil AM 04 (1400x1070 mm)
- Manufacturer: Millutensil
The first model for small and medium dies. The AM 04 is the first model with an hydraulic system controlled by electronic servo proportional valves and a control of parallelism. The control system includes measur...
Milan, Italy
Millutensil BV 26 C (980x750mm)
- Manufacturer: Millutensil
- Model: BV26
Entry level-version for small and medium size moulds. The BV 26 C is the entry level version of the Millutensil’s spotting presses. The control panel of the BV 26 C is equipped with user-friendly graphics to simp...
Milan, Italy
Milan, Italy
Millutensil AM 06 (2000x1270 mm)
- Manufacturer: Millutensil
The second model for small and medium size dies. The AM 06 is the first model with an hydraulic system controlled by electronic servo proportional valves and a control of parallelism. The control system includes ...
Milan, Italy
Millutensil AM 08 (2600x1470 mm)
- Manufacturer: Millutensil
The third model for medium size dies. The AM 08 is the first model with an hydraulic system controlled by electronic servo proportional valves and a control of parallelism. The control system includes measurement...
Milan, Italy
Millutensil Tilting upper plate
- Manufacturer: Millutensil
Tilting upper plate forward by 100° For optimal access to the mould, the press upper plate can be tilted forward by 100°. By tilting the press plate on the short side, the operator can work at an optimal height, ...
Milan, Italy
Millutensil Extensible lower plate
- Manufacturer: Millutensil
Extensible lower plate The lower plate is extensible, driven by hydraulic cylinder. It slides on roller bearings and is laterally guided by ball bearings, without any friction and consequent wear. In the final po...
Milan, Italy
Millutensil Hydromechanical safety devices
- Manufacturer: Millutensil
Hydromechanical safety devices against the accidental fall of the upper plate 2 hydromechanical fall prevention devices on the right and left sides of the press upper plate operating for the entire stroke length....
Milan, Italy
Millutensil Convenient control from the platform
- Manufacturer: Millutensil
CONVENIENT CONTROL In frontal side, the spotting press models BV 32/33 and BV 34/34 are equipped with a platform. A ladder leads to the platform, whose perimeter is equipped with a glass parapet to guarantee the ...
Milan, Italy
Millutensil Extensible lower plate
- Manufacturer: Millutensil
Lower plate Hydraulic cylinders drive the lower extensible plate outside the columns in an easily accessible position for the work outside the press. It slides on roller bearings and is laterally guided by ball b...
Milan, Italy
Tip: Enter manufacturer, model or keyword